Clear One BMA 360D User manual

BMA 360D
Quick Start Guide
QSG-0170-001v1.0 September 2023

BMA 360D
Page 1 QSG-0170-001v1.0 September 2023
Quick Start Guide
Notices
© 2023 ClearOne, Inc. All rights reserved.
Information in this document is subject to change without notice.
Document: QSG-0170-001v1.0 September 2023
ClearOne®Contacts
Headquarters Headquarters
5225 Wiley Post Way Suite 500 Tel: +1.801.975-7200
Salt Lake City, UT 84116
Sales Technical Support
Tel: [phone] Tel: [phone]
[email protected] [email protected]
Important Safety Information
1. Before you set up the BMA 360D, read this manual carefully. Follow the setup instructions
indicated in this manual.
2. Keep this manual for future use.
3. To prevent electric shock, do not remove screws or the BMA 360D, housing. No self-serviceable
parts are inside the housing
WARNING: TO
PREVENT FIRE
OR
ELECTRICAL
SHOCK
HAZARD, DO
NOT EXPOSE
THIS
PRODUCT TO
RAIN OR
MOISTURE
THE LIGHTING FLASH
AND ARROWHEAD
WITHIN THE TRIANGE IS
A WARNING SIGN
ALERTING YOU OF
DANGEROUS VOLTAGE
INSIDE THE PRODUCT.
THE EXCLAMATION POINT
WITHIN THE TRIANGLE IS A
WARNING SIGN ALERTING
YOU OF IMPORTANT
INSTRUCTIONS
ACCOMPANYING THE
PRODUCT.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
SEE MARKING ON BOTTOM/BACK OF PRODUCT
RISK OF ELECTRIC SHOCK DO
NOT OPEN
AVIS RISQUE DU CHOC ELECTRIQUE
- NE PAS OUVRIR
Use only in
non-tropical
locations.
Use only at
altitudes of
2000 meters
or less.
CAUTION

BMA 360D
Page 2 QSG-0170-001v1.0 September 2023
Quick Start Guide
No Description Quantity
1 BMA 360D 1
Packing List
Verify that you have received all parts associated with each of the components.
Inspect your shipment carefully. If the shipment shows obvious signs of damage, retain original
boxes and packing material for inspection by the carrier, and contact them immediately. ClearOne is
not responsible for product damage incurred during shipment.
User Manual
The BMA 360D User Manual can be downloaded from the ClearOne website.
https://www.clearone.com/bma-360d

BMA 360D
Page 3 QSG-0170-001v1.0 September 2023
Quick Start Guide
Setup
Connect the BMA 360D, Speakers, PoE Injector, Network Switch, Computer, and Dante Enabled
Audio DSP as shown.
1 2
3
4 5
Connections
Refer to the numbered diagram below for these connections.
Install and wire speakers. Using speakers requires the use of a 90 Watt PoE++ injector.
Connect a Cat 6 cable (not provided) between the BMA 360D and the PoE Injector.
Connect a Cat 6 cable (not provided) between the PoE injector and the network switch
Configure the BMA 360D network and audio properties using Console AI Lite**.
Connect the BMA 360D to other Dante enabled devices using Dante Controller**.
1
2
3
4
5

BMA 360D
Page 4 QSG-0170-001v1.0 September 2023
Quick Start Guide
Safety Precautions
Installation
Avoid contact with any liquid, gas or solid material that may cause corrosion.
Do Not Disassemble
This product has no user-repairable parts. Damage caused by unauthorized disassembly is not
covered by warranty.
Notice
Electromagnetic fields at specific frequencies may affect audio quality.
No Description Detail
* - Suggested Equipment
1 PoE Injector 910-3200-202 PoE Power supply kit, 36 W (No Speakers)
910-3200-209 PoE Power supply kit, 90 W (Supports
Speakers)
2 Speaker Wire 24 AWG two conductor
3 Network Cable Solid core, 23 AWG, factory terminated Cat 6
** - Suggested Software
4 CONSOLE Al Lite https://www.clearone.com/console-ai-lite-configuration-
software-0
5 Audinate Dante Controller https://www.audinate.com/products/software/dante-controller
Operating Requirements