Clear One Platform User manual

AN INTUITIVE,
AFFORDABLE
CONTROLLER
FOR XAP
TABLETOP CONTROLLER
APPLICATIONS
Conference Rooms
Boardrooms
Courtrooms
Distance Learning Facilities
Training Rooms
Programmable Functions:
+Presenter mic +/-
+Lights on/off
+Projector on/off
+Screen up/down
+DVD/CD/VCR volume +/-
+Record call start/stop
+Other audio & presentation
functions
TABLETOP CONTROLLER ADVANTAGES
Simple, Intuitive Operation
+Dial pad resembles telephone keypad for instant familiarity
+Users can start and run an audio conference call as easily as dialing a phone –
no training required
+Uses actual buttons instead of touch panel screen, which is less intimidating to
untrained users
+Buttons are limited to essential audio conference, presentation, and room
controls
Affordability
+Costs less than touch-screen panel control systems
+Simplified setup for user-definable keys saves programming time and expense
compared to touch-screen panel control systems
+Combined with XAP, delivers affordable professional audio conferencing system
solution
Room Control Flexibility
+Offers full audio conference dialing functions and basic room audio control out
of the box
+Also offers five user-definable keys to manage the most commonly-used audio
and presentation control functions, such as lights on/off, projector on/off, and
screen up/down.
Attractive, Functional Design
+Sleek design fits perfectly on any boardroom table
+Weighted base gives controller substantial feel
+Pre-printed labels with common presentation, audio conference, and room
control functions apply easily to user-definable keys
TABLETOP CONTROLLER
For XAP Professional Conferencing Platform
An intuitive, cost-effective tabletop controller for ClearOne’s XAP
platform. It greatly simplifies control of an audio conference without the
need for a touch-screen panel control system. User-definable keys offer
simple control of basic audio and presentation functions.
PROFESSIONAL CONFERENCING
DATA SHEET <

TABLETOP CONTROLLER DATA SHEET <
>CLEARONE LOCATIONS
Tactical Keypad
Dial Pad: 12 total buttons
Volume Controls: Up, Down
Call Functions: On/Off, Flash, Redial, Mute
User-defined Keys: 5 buttons
LCD
Display Type: 3-line 16-character matrix
Backlight: No
Microprocessor
Internal Memory
Serial Interface to other subassemblies
Master Reset
Connector
Tethered female RJ-11 female connector
Interface Cabling
Cable Type: CAT 3, CAT 5, or CAT 6 cabling
Cable Gauge: 24 gauge
Maximum Distance: 150 feet between mixer
and Tabletop Controller
Communications
Type: DTE
Physical: RS-232
Baud Rate: Selectable (38.4 or 57.6K baud)
Flow Control: None
Power Supply
Primary Voltage: 100 to 240 VAC auto-
sensing 50-60 Hz
Secondary Voltage: 12 VDC
Wattage: 5 watts
Average Current: 100 milliamps
Connection: Positive Center/Grounded Shield
Environmental
Operating Temperature: 32 to 122 degrees F
Humidity: 15 to 80%
Mechanical
Dimensions (WxDxH): 10.5” x 4.5” x 2.75”
Weight: 2.0 lb (.91 kg)
Model Number
910-151-890 Tabletop Controller
Headquarters:
Salt Lake City, UT USA
5225 Wiley Post Way
Suite 500
Salt Lake City, UT 84116
Tel: [phone];
800-945-7730
Fax: [phone]
[email protected]
Latin America
Tel: [phone]
[email protected]
EMEA
Tel: [phone]
[email protected]
APAC
Tel: [phone]
[email protected]
© 2007 ClearOne Communications Inc. All rights reserved. Other product names may be trademarks of their respective owners. Information in this document subject to change without notice. 802-151-890 Rev. 1.3
>SPECIFICATIONS
>COMPONENTS
TABLETOP
CONTROLLER
Wired controller
connects directly
to serial port of
XAP 800, XAP 400,
or XAP TH2, along
with power source,
using included
Y-cable
CONTROLLER BUILDER SOFTWARE
Intuitive interface allows for simple
configuration of user-definable keys--
execute presets and macros on XAP or
control third-party devices connected to
XAP