Clear Water Microzone 300P User manual

Corona Discharge Ozone Generator
Microzone 300P
..........................................................................................
850-E Capitolio Way, San Luis Obispo, Ca 93401 • 805-549-9724 • Fax: [phone] • E-mail: [email protected] • www.cwtozone.com
Copyright © 2003 - ClearWater Tech, LLC. • Reproduction of any kind is prohibited • LIT94 • REV100102
ClearWater Tech, LLC.
Integrated Ozone Systems
Owner’s Manual
ClearWater Tech, LLC. Limited One-Year Warranty
SUMMARY OF THE WARRANTY
ClearWater Tech, LLC (“CWT”) makes every effort to assure that its products meet high quality and durability stan dards and warrants the
products it manufactures against defects in materials and workmanship for a period of one (1) year, commencing on the date of original
shipment from CWT, with the following exceptions: 1) The warranty period shall begin on the installation date if the in stal la tion is performed
within 90 days of the original shipment from CWT; 2) The warranty period shall begin on the date of the bill of sale to the end user if the
installation date is more 90 days after the original shipment date. To validate the warranty, a warranty card must be returned to CWT and
must include the following information:
• End user name
• Complete address, including telephone number
• Date installed
• Complete model and serial number information
• Name of company from which the unit was purchased
Repairs and replacement parts provided under this warranty shall carry only the unexpired portion of this warranty or 90 days, which ev er
is longer.
ITEMS EXCLUDED FROM THE WARRANTY
This warranty does not extend to any product and/or part from which the factory assigned serial number has been removed or which has
been damaged or rendered defective as a result of:
• An accident, misuse, alteration or abuse
• An act of God such as fl ood, earthquake, hurricane, lightning or other disaster resulting only from the forces of nature
• Normal wear and tear
• Operation outside the usage parameters stated in the product user’s manual
• Use of parts not sold by CWT
• Service or unit modifi cation not authorized by CWT • Check valve/so le noid valve failure
• Failure to meet ser vice requirements as outlined in the I & O manual • Damage which may occur during shipping
OBTAINING SERVICE UNDER THE WARRANTY
Any product and/or part not performing satisfactorily may be returned to CWT for evaluation. A Return Goods Au tho ri za tion (RGA) number
must fi rst be obtained by either calling or writing your local au tho rized dealer, dis trib u tor or CWT direct, prior to shipping the product. The
problem experienced with the product and/or part must be clearly described. The RGA number must appear prom i nent ly on the exterior of
the shipped box(es). The product and/or part must be packaged ei ther in its original packing material or in comparable and suitable packing
material, if the orig i nal is not available. You are responsible for paying shipping charges to CWT and for any damages to the product and/or
part that may occur during shipment. It is recommended that you insure the shipment for the amount you originally paid for the product
and/or part.
If, after the product and/or part is returned prepaid and evaluated by CWT, it proves to be de fec tive while under war ran ty, CWT will, at its
election, either repair or replace the defective prod uct and/or part and will return ship at lowest cost transportation prepaid to you except
for ship ments going outside the 50 states of the United States of America. If upon in spec tion, it is determined that there is no defect
or that the damage to the product and/or part re sult ed from causes not within the scope of this limited warranty, then you must bear the
cost of repair or re place ment of damaged product and/or part and all return freight charges. Any un au tho rized attempt by the end user to
repair CWT man u fac tured products without prior permission shall void any and all warranties. For service, contact your authorized dealer
or distributor or CWT direct at [phone], extension 23.
EXCLUSIVE WARRANTY
There is no other expressed warranty on CWT products and/or parts. Neither this warranty, or any other warranty, ex pressed or implied,
including any implied warranties or merchantability of fi t ness, shall ex tend beyond the war ran ty pe ri od. Some states do not allow limitations
on how long an implied warranty lasts, so that the above limitation or exclusion may not apply to you.
DISCLAIMER OF INCIDENTAL AND CONSEQUENTIAL DAMAGES
No responsibility is assumed for any incidental or consequential damages; this includes any damage to another product or products resulting
from such a defect. Some states do not allow the ex clu sion or lim i ta tion of incidental or con se quen tial damages, so that above limitation or
exclusion may not apply to you.
LEGAL REMEDIES OF PURCHASER
This warranty gives you specifi c legal rights and you may also have other rights which vary from state to state.
THIS STATEMENT OF WARRANTY SUPERSEDES ALL OTHERS PROVIDED TO YOU AT ANY PRIOR TIME.

1. Submerge the diffuser in the body of water to a maximum depth of 10”.
2. Plug ozone generator into a GFI-protected outlet and turn unit on (when unit is
on, bubbles will begin rising from the diffuser).
3. Allow several minutes to ensure diffusion of the ozone into the water.
4. When finished, turn the on/off timer control to ‘OFF’ position and remove diffuser from
water.
HOW TO USE MICROZONE 300P
ACCESSORIES
Bottom view
Back view
DIFFUSER
Connect diffuser to the open end of hose (before using the diffuser for the first time, blow
air through it to ensure proper airflow).
AIR DRYER
Attach air dryer to the right side of the unit labeled “Air Dryer Inputs”.
UNIT PLACEMENT
• Any free counter space or wall space that is between 12” to 36” away from the
body of water and is close to a GFI- protected electrical outlet. Note: Do not allow
the ozone generator to come in contact with water at any time.
• Ozone generator may be wall mounted (using holes on back of unit) or simply placed on
a flat surface.
MAINTENANCE
• Over time, diffuser may become clogged and result in air compressor damage. It is
recommended that the diffuser is cleaned once a month by submersing it in a solution
of 50% water and 50% muriatic acid for a few hours. Rinse thoroughly with water before
re-installing.
• Should the beads in the air dryer turn pink, excess moisture has entered the air stream
feeding the ozone generator. To remove the moisture, remove air dryer from ozone
generator and place it in a microwave oven for 15 to 30 seconds. Blow air through it to
insure proper air flow before re-installing.
SPECIFICATIONS
• Electrical - 120 volt, 60 Hz • Dimensions - 3” x 5” x 9 1/2”
• Weight - 2 1/4 pounds • Fuse - 2.0 AMP
INSTALLATION and
PLACEMENT INSTRUCTIONS
CHECK VALVE -
• Cut tube 6” from ozone hose connector. Slide one end of the blue check valve into
the open end of the hose connected to the ozone generator, making sure the flat
side of the check valve diaphragm housing is facing the ozone hose connector.
Slide an end of the remaining length of hose onto the other end of the check valve.
After unpacking the Microzone 300P please do the following:
CLEAR HOSE -
• Moisten one end and slide hose onto ozone hose connector located on bottom
of unit.
OZONE GENERATOR
Right side view
Front view
Diffuser 8’ Clear Hose
Wall
Mounting
Holes
Air
Inlet
Fuse Holder Ozone Hose Connector
Air Dryer
Inputs
5’ Power Cord
Air Dryer
Check Valve
Air Dryer
On/Off
Timer Control
Two Screws