Cleod9 Wildix W-AIR 150 User manual

User Guide
W-AIR 150
Local contacts
Add a contact to local phonebook
1. Press Menu key and select Contacts
2. Press More Soft key -> Add contact
3. Fill in the fields, when ready, press Save Soft key.
Assign a speed dial number to a local contact:
1. In Contacts, select a contact that you wish to assign a speed
dial number to
2. Select More -> Speed dial
3. Select a speed dial number (from 2 to 9) that you wish to assign
to the selected contact
4. Press Add Soft key.
Make a call
Manually: enter the number from idle and press the green Off-hook
key.
Dial a speed dial number: make a long press (>2 seconds) from idle
on the speed dial key (from 2 to 9) assigned to the contact.
Call from call history:
1. Press Menu key and select Call list
2. Select a call from the list
3. Press the green Off-hook key
Call from shared company phonebooks
1. Press Menu key and select Central directory
2. Press Search Soft key
3. Enter the number or the name and press Selection key
4. Select a contact that you wish to call (in case a contact has
several phone numbers, a green arrow in displayed near the
contact; use Navigation keys to select the phone number)
5. Press the green Off-hook key
Shared company phonebooks must be set up by user via
Collaboration or by the PBX administrator.
Adjust volume, enable speaker, mute the microphone
Mute the microphone: press Mute key during a call.
Adjust the volume: press Volume Up / Down keys during a call.
Turn on the Speaker mode: press the Speaker key during a call.
Press the key to answer a ringing call in Speaker mode.
Push to talk (PTT)
Press Menu key, select Settings -> PTT -> On to enable the
feature. Press and hold Mute key and say your message. Your
message is transmitted to other W-AIR 100/150 handsets in the
network.
Hold / Second call
Press Hold Soft key during a call to put a call on hold.
Second call: enter the number to call or press Selection key to
access Contacts or Central directory, then press the green Off-
hook key.
Swap: when you have one active call and one call on hold, press
Swap Soft key to swap between them.
Note: this device supports up to two active calls / lines.
Call transfer
Blind transfer (the desired party/extension is not notified of the
impending transfer)
1. Press!Transfer!Soft key during a call (the call is put on hold)
2. Enter the number or press Selection key to search in Contacts
or Central directory
3. Press Transfer Soft key.
Attended transfer (the desired party/extension is notified)
1. Press!Transfer!Soft key during a call (the call is put on hold)
2. Enter the number or press Selection key to search in Contacts
or Central directory
3. Press the green Off-hook key
4. Press Transfer Soft key to transfer the call.
Conference call
1. Press Conf. Soft key during a call (the call is put on hold)
2. Enter the number or press Selection key to search in Contacts
or Central directory
3. Press the green Off-hook key
4. When the third party answers, press Conf, Soft key.
Access Voicemail
Press Voicemail key (Key 1) and hold it for at least 2 seconds to
access Voicemail and follow the audio prompts.
Phone and audio settings
• For Language settings, LED signal, Power save, Auto-answer,
Vibration settings: press Menu key and select Settings.
• For Ring volume, Ring melody, Key sound, Coverage warning,
Charger warning, Bluetooth and other audio settings: press
Menu key and select Audio settings.
• To set Alarm clock: press Menu key and select Alarm clock.

Packing list
• 1 x W-AIR 150 handset with Lithium-Ion battery
• 1 x charger
• 1 x A/C adapter
• 1 x belt clip and belt clip cover
• 1 x pull cord and pull cord cover
Safety information
https://www.wildix.com/safety-information/
Put into operation
1. Open the battery compartment by turning the lock lever
2. Lift the battery cover and remove the battery
3. Remove the protective foil from the battery contacts
4. Reinsert the battery and close the battery compartment
5. Connect the A/C adapter to the charger
6. Place the phone into the charger and fully charge the battery
(this may take up to 6 hours; charging status is indicated on the
display).
The blue LED of the charger is on when the phone is properly
placed into the charger and charging.
Keypad instruction
Turn on / turn off
• Press and hold the On-hook key for at least 2 seconds to turn
on.
• Press and hold the On-hook key for at least 3 seconds to turn
off.
Register to the base
1. Press the Menu key
2. Select Connectivity
3. Select Register,
4. Select an empty slot and enter the PIN (by default, 0000)
5. Press OK.
Login
1. Dial 99 and press the green Off-hook key
2. Enter your extension number
3. Enter the first five characters of your password
4. Press 1 when prompted.
To enter your password from the phone’s keypad: press once an
alphanumeric key corresponding to a letter which you need to
enter; press the star button (*) to
enter any special character.
Example: Password: 4Ag7$Zl@
Enter: 4247*
www.mycleod9.com
full guide online:
Website: www.Cleod9.net
Support: [email protected]
Toll Free: 844-868-2727