Geemarc AMPLIDECT COMBI 595 User manual


12345
Quick User Guide
Please refer to our website: www.geemarc.com for an up to date user
guide, as there may be important updates and changes you need to be
aware of !
Congratulations!
Congratulations on purchasing your Geemarc AMPLIDECT COMBI 595
telephone. This telephone offers all the advantages of cordless technology
(compliant with Digitally Enhanced Cordless Telecommunications- DECT
standard) together with an easy to see big button keypad, ideal for those
who suffer with poor sight. This telephone is also hearing aid compatible.
It is important that you read the instructions below in order to use your
Geemarc telephone to its full potential.
1 Telephone base, 1 Corded handset, 1 cordless Handset, 2 power adapters,
1 Charger, 1 Telephone line cord, 3 Ni-Mh batteries, 1 Quick user guide.
Connecting the telephone
Connect the telephone cable to the telephone line socket (A) and to the
telephone wall socket (B).
Connect the handset curly cord to the base(E).
Connect the power adapter jack to base and charger (C) then connect the
power adapter plug in mains power (D).
NOTE: Use only the power adapters supplied with the phone.
Connecting the battery
Slide the battery cover downwards Install the
3 batteries into the socket as indicated,
matching correct polarity (+,-).
Align the cover flat against the battery
compartment, and then slide it upwards until
it clicks into place.
Charging the batteries
Charge the batteries for at least 16 hours when charging for the first time.
Baseoverview
1 LCD DISPLAY
2 IN USE : ON during a call.
3 RING light
●Flashes when there is an incoming call.
●Steadily on when the answering machine is turned on. Flashes
when there are new memos or messages in the answering machine.
4 MENU / OK
●In idle mode: Press to access the main menu.
●In sub-menu mode: Press to confirm the selection.
●In Redial list/Call list: Press to store the number into Phonebook.
5 PHONEBOOK:
●
In idle: Press to access the phonebook.
6 CALLS (CALL LIST)
●
In idle mode: Press to access the call list.
7 INT / MUTE / CLEAR
●In main menu mode: Press to go back to idle screen.
●In sub-menu mode: Press to go back to previous level.
●In sub-menu mode: Press and hold to go back to idle screen.
●In editing / predialing mode: Press to clear a character/digit.
●In editing / predialing mode: Press and hold to delete all the
character / digits.
●During a call: Press to mute / unmute the microphone.
●In ringing: Press to silence the base ringer.
●In idle mode: Press to intercom another system handset.
8 MEMORY KEYS (3 PHOTO SPEED DIAL KEYS; 1 TONE KEY -
M4
●In idle mode: Press to dial out to the number stored in the
memory key.
●During a call: press M4 to increase the high frequency or the low
fre
q
uencies.
9 VOLUME BOOST / SOS
●During a call: Press to activate/deactivate the VOLUME BOOST
function.
●In idle mode: Press and hold for 2 seconds to launch the
emergency calling sequence set in your phone.
●In SOS mode: press and hold for 2 seconds to stop the
emer
g
enc
y
call.
10 SPEAKER
●In Idle mode or Phonebook/ Call list/ Redial list view mode:
Press to make a call with speakerphone.
11 ALPHANUMERIC KEYPAD, STAR ( ), HASH/RECALL ( /R)
●In predial or editing mode: Press to insert a digit.
●0 key in predial or editing mode: Press and hold to insert a
pause.
●On line: Press the ke
y
R/ to make a recall.
12 NAVIGATION KEYS
▲UP
●In menu mode: Press to scroll up the menu items.
●In Phonebook list / Redial list / Call list: Press to scroll up the list.
●In editing mode: Press to move the cursor one character to the
right.
●During a call or TAM message playback: Press to increase the
volume.
REPEAT / OGM
●In Idle mode: Press and hold 2 sec until beep to record OGM.
●Press /to stop the recording.
●In TAM message playback mode: Press to go back to previous
message.
MEMO / SKIP FORWARD
●In Idle mode: Press and hold 2 sec until beep to record a memo
and press /to stop the recording.
●In TAM message playback mode: Press to skip to next message.
DOWN / REDIAL LIST
●In Idle mode: Press to access the redial list.
●In menu mode: Press to scroll down the menu items.
●In Phonebook list / Redial list / Call list view mode: Press to
scroll down the list.
●In editing mode: Press to move the cursor one character to the left.
●During a call or TAM message playback: Press to decrease the
volume.
13 /PLAY / STOP
●In Idle mode: Press to playback messages.
●During TAM message playback: Press to stop playing messages.
14 SLOW
●During TAM MSG playback: Press to playback messages in slow
speed.
15 DELETE
●In TAM message playback mode: Press to delete the current
TAM message playback.
●In idle mode: Press and hold to delete all old messages.
16 ANS ON / OFF
●In Idle: Press to switch the answering machine ON or OFF.
●The cassette tape icon is displayed on the screen if activate.
Handsetoverview
17 EARPIECE
18 LCD DISPLAY
19 CHARGE LIGHT
●
Steadil
y
on when the handset is char
g
in
g
in the char
g
e
r
.
20 MENU / OK
●In idle mode: Press to access the main menu.
●In sub-menu mode: Press to confirm the selection.
●During a call: Press to access Intercom/ Phonebook / Redial list
/
Call lo
g
/Record call.
21 UP / CALL LIST
●In idle mode: Press to access the redial list.
●In menu mode: Press to scroll up the menu items.
●In phonebook list / redial list / call list: Press to scroll up the list.
●In editing mode: Press to move the cursor one character to the
right.
●During a call: Press to increase the listening volume.
●During ringing: Press to increase the ringer volume.
22 TALK ON / SPEAKERPHONE
●In idle/pre-dial mode: Press to make a call in earpiece mode.
●In phonebook/redial list /call list: Press to make a call to the
selected entry in the list in earpiece mode.
●During ringing: Press to answer a call in earpiece mode.
●On line: Press again to pass in speakerphone mode. Press
a
g
ain to switch to earpiece mode.
23 DOWN / PHONEBOOK
●In idle mode: Press to access the phonebook.
●In menu mode: Press to scroll down the menu items.
●In phonebook list / redial list / call list: Press to scroll down the list.
●In editing mode: Press to move the cursor one character to the left.
●During a call: Press to decrease the listening volume.
●During ringing: Press to decrease the ringer volume.
24 MICROPHONE
25
VOLUME BOOST / SOS
●During a call: Press to activate/deactivate the VOLUME BOOST
function.
●In idle mode: Press and hold for 3 seconds to enter the
emergency calling sequence set in your handset.
●In SOS mode: press and hold for 2 seconds to stop the
emergency call.
26 TONE
●During a call: Press this key to increase the high frequency or
the low frequencies.
27 CANCEL / MUTE
●In main menu mode: Press to go back to idle screen.
●In sub-menu mode: Press to go back to previous menu.
●In editing/pre-dial mode: Press to delete a character / digit.
●In editing/pre-dial mode: Press and hold to delete all the
characters / digits.
●During a call: Press to mute/resume the microphone.
●In idle mode: Press to intercom another handset.
28 TALK OFF
●During a call: Press to end a call and go back to idle screen.
●In menu / editing mode: Press to go back to idle screen.
●During ringing: Press to silence the handset ringe
r
.
29 ALPHANUMERIC KEYPAD, STAR ( ), 0, and HASH/RECALL
(R)
●In predial or editing mode: Press to insert a digit / character
and R.
●During a call: Press and hold Rto make a Flash (Recall).
●0 key in idle / pre-dial mode / number editing mode: Press
and hold to insert a pause.
First use of your handset
After you have inserted the batteries, the display asks you to select your
text language with the keys ▼/▲, press to valid.
Then enter the date with the keypad and validate by pressing .
Then enter the correct hour with the keypad and validate by pressing
.
Then select your talking language with the keys ▼/▲, press to
valid.
General menu setting
The phone settings are always set in the same manner:
Press button to open the main menu.
Then use ▼/▲buttons to select an entry and confirm it by pressing the
button.
The factory preset PIN code is 0000. Example:
Set the display language on the base
Press MENU/OK , then select ▼/▲language, press MENU/OK,
then select ▼/▲desired language and then press MENU/OK to confirm.
Set the language on the handset
Press MENU/OK , then select ▼/▲HS settings, press ,
then select ▼/▲language, press , than select ▼/▲desired language and
then press to confirm.
Basemenu
CALL LOG: ►Incoming call list
PHOTO MEM: ►M1 ►M2 ►M3 ►M4
PHONEBOOK: ►ALL ►SPEED DIAL ►VIP
CALL BLOCK: ►BLACK LIST►SETTINGS(BLOCK MODE-W/O NUM)
INTERCOM: HANDSET 1-2-3 or ALL
DATE & TIME: ►DATE FORM ►TIME FORM ►SET DATE
TEXT LANG: ►ENGLISH ►FRANÇAIS ►DEUTCH ►ITALIANO
►NEDERLANDS ►ESPANOL ►PORTUGUES…
BS SETTING: ►RING SETUP ►KEY TONE ►FLASH TIME ►FIRST
RING ►DEFAULT
PAGE ALL HS
REGISTER
SET SOS: ►SOS NUMBER ►SOS MSG ►SOS LANG
REMINDER: ►ALARM 1 ►ALARM 2 ►ALARM 3 ►ALARM 4 ►ALARM
5 ►ALARM 6 ►ALARM 7 ►ALARM 8 ►ALARM 9 ►ALARM 10
TLK DIGITS: ►OFF ►ON
ANS. SYS: ►PLAYBACK ►DEL OLD ►MEMO ►TAM ON/OFF ►SET
TAM (TAM LANG, CALL SCREEN, TAM MSG, ANS. DELAY, REC. TIME,
REMOTE ACC, CHANGE PIN, MSG ALERT)
Handset menu
CALL LOG: ►RECEIVED
PHOTO MEM: ►M1 ►M2 ►M3 ►M4
PHONEBOOK: ►ALL (ADD-VIEW-EDIT-DELETE-DELETE ALL-ADD
VIP-ADD TO PM-ADD TO SD-STATUS) ►SPEED DIAL ►VIP
CALL BLOCK: ►BLACK LIST►SETTINGS(BLOCK MODE-W/O NUM)
INTERCOM: ►BASE or HANDSET X
BS SETTING: ►BS RINGER ►RING VOL ►FLASH TIME ►FIRST RING
HS SETTING: ►RING SETUP ►TONE SETUP ►AUTO BOOST ►TEXT
LANG ►DATE & TIME ►REGISTER ►DEFAULT
SET SOS: ►SOS NUMBER ►SOS MSG ►SOS LANG
REMINDER: ►ALARM 1 ►ALARM 2 ►ALARM 3 ►ALARM 4 ►ALARM
5 ►ALARM 6 ►ALARM 7 ►ALARM 8 ►ALARM 9 ►ALARM 10
TLK DIGITS: ►ON ►OFF
ANS. SYS: ►PLAYBACK ►DEL OLD ►MEMO ►TAM ON/OFF ►SET
TAM (TAM LANG, CALL SCREEN, TAM MSG, ANS. DELAY, REC. TIME,
REMOTE ACC, CHANGE PIN, MSG ALERT)
Registration
NOTE: Handset and base station are pre-registered. Up to four
handsets can be registered to a single base station.
Registration a handset
On Base: Press MENU/OK , select ▼/▲REGISTER.
Press MENU/OK to see REGISTERING... (If the registration is
successful, there will be a confirmation beep).
On Handset: Press . Use ▼/▲to select HS SETTING.
Press . Use ▼/▲to select REGISTER.
Press and REGISTERING is display.
After a short delay, if the registration is successful, there will be a
confirmation beep, and the handset display will go back to idle mode with
the new handset number shown. The base display will also go back to
idle mode.
InternalCall
On Base: Press , and ▼/▲to select HS 1 - 4.
Press MENU/OK to call the handset.
On Handset: Press CANCEL MUTE, and ▼/▲to select the
desired handset number, Base or ALL and press MENU/OK.
CallAllHandsets
Base: Press , and ▼/▲to select ALL, press MENU/OK
to connect.
On Handset: Make point 1 in chapter internal call and choose ALL.
Transfer an External Call
On Base: Press MENU/OK twice, and ▼/▲to select hanset
number, press on handset. After connection quit the call on base.
Intercom
Menu settin
g
First use of
y
our telephone
Overview
Installation
Packa
g
e contents


12345
Quick User Guide
Please refer to our website: www.geemarc.com for an up to date user
guide, as there may be important updates and changes you need to be
aware of !
Congratulations!
Congratulations on purchasing your Geemarc AMPLIDECT COMBI 595
telephone. This telephone offers all the advantages of cordless technology
(compliant with Digitally Enhanced Cordless Telecommunications- DECT
standard) together with an easy to see big button keypad, ideal for those
who suffer with poor sight. This telephone is also hearing aid compatible.
It is important that you read the instructions below in order to use your
Geemarc telephone to its full potential.
1 Telephone base, 1 Corded handset, 1 cordless Handset, 2 power adapters,
1 Charger, 1 Telephone line cord, 3 Ni-Mh batteries, 1 Quick user guide.
Connecting the telephone
Connect the telephone cable to the telephone line socket (A) and to the
telephone wall socket (B).
Connect the handset curly cord to the base(E).
Connect the power adapter jack to base and charger (C) then connect the
power adapter plug in mains power (D).
NOTE: Use only the power adapters supplied with the phone.
Connecting the battery
Slide the battery cover downwards Install the
3 batteries into the socket as indicated,
matching correct polarity (+,-).
Align the cover flat against the battery
compartment, and then slide it upwards until
it clicks into place.
Charging the batteries
Charge the batteries for at least 16 hours when charging for the first time.
Baseoverview
1 LCD DISPLAY
2 IN USE : ON during a call.
3 RING light
●Flashes when there is an incoming call.
●Steadily on when the answering machine is turned on. Flashes
when there are new memos or messages in the answering machine.
4 MENU / OK
●In idle mode: Press to access the main menu.
●In sub-menu mode: Press to confirm the selection.
●In Redial list/Call list: Press to store the number into Phonebook.
5 PHONEBOOK:
●
In idle: Press to access the phonebook.
6 CALLS (CALL LIST)
●
In idle mode: Press to access the call list.
7 INT / MUTE / CLEAR
●In main menu mode: Press to go back to idle screen.
●In sub-menu mode: Press to go back to previous level.
●In sub-menu mode: Press and hold to go back to idle screen.
●In editing / predialing mode: Press to clear a character/digit.
●In editing / predialing mode: Press and hold to delete all the
character / digits.
●During a call: Press to mute / unmute the microphone.
●In ringing: Press to silence the base ringer.
●In idle mode: Press to intercom another system handset.
8 MEMORY KEYS (3 PHOTO SPEED DIAL KEYS; 1 TONE KEY -
M4
●In idle mode: Press to dial out to the number stored in the
memory key.
●During a call: press M4 to increase the high frequency or the low
fre
q
uencies.
9 VOLUME BOOST / SOS
●During a call: Press to activate/deactivate the VOLUME BOOST
function.
●In idle mode: Press and hold for 2 seconds to launch the
emergency calling sequence set in your phone.
●In SOS mode: press and hold for 2 seconds to stop the
emer
g
enc
y
call.
10 SPEAKER
●In Idle mode or Phonebook/ Call list/ Redial list view mode:
Press to make a call with speakerphone.
11 ALPHANUMERIC KEYPAD, STAR ( ), HASH/RECALL ( /R)
●In predial or editing mode: Press to insert a digit.
●0 key in predial or editing mode: Press and hold to insert a
pause.
●On line: Press the ke
y
R/ to make a recall.
12 NAVIGATION KEYS
▲UP
●In menu mode: Press to scroll up the menu items.
●In Phonebook list / Redial list / Call list: Press to scroll up the list.
●In editing mode: Press to move the cursor one character to the
right.
●During a call or TAM message playback: Press to increase the
volume.
REPEAT / OGM
●In Idle mode: Press and hold 2 sec until beep to record OGM.
●Press /to stop the recording.
●In TAM message playback mode: Press to go back to previous
message.
MEMO / SKIP FORWARD
●In Idle mode: Press and hold 2 sec until beep to record a memo
and press /to stop the recording.
●In TAM message playback mode: Press to skip to next message.
DOWN / REDIAL LIST
●In Idle mode: Press to access the redial list.
●In menu mode: Press to scroll down the menu items.
●In Phonebook list / Redial list / Call list view mode: Press to
scroll down the list.
●In editing mode: Press to move the cursor one character to the left.
●During a call or TAM message playback: Press to decrease the
volume.
13 /PLAY / STOP
●In Idle mode: Press to playback messages.
●During TAM message playback: Press to stop playing messages.
14 SLOW
●During TAM MSG playback: Press to playback messages in slow
speed.
15 DELETE
●In TAM message playback mode: Press to delete the current
TAM message playback.
●In idle mode: Press and hold to delete all old messages.
16 ANS ON / OFF
●In Idle: Press to switch the answering machine ON or OFF.
●The cassette tape icon is displayed on the screen if activate.
Handsetoverview
17 EARPIECE
18 LCD DISPLAY
19 CHARGE LIGHT
●
Steadil
y
on when the handset is char
g
in
g
in the char
g
e
r
.
20 MENU / OK
●In idle mode: Press to access the main menu.
●In sub-menu mode: Press to confirm the selection.
●During a call: Press to access Intercom/ Phonebook / Redial list
/
Call lo
g
/Record call.
21 UP / CALL LIST
●In idle mode: Press to access the redial list.
●In menu mode: Press to scroll up the menu items.
●In phonebook list / redial list / call list: Press to scroll up the list.
●In editing mode: Press to move the cursor one character to the
right.
●During a call: Press to increase the listening volume.
●During ringing: Press to increase the ringer volume.
22 TALK ON / SPEAKERPHONE
●In idle/pre-dial mode: Press to make a call in earpiece mode.
●In phonebook/redial list /call list: Press to make a call to the
selected entry in the list in earpiece mode.
●During ringing: Press to answer a call in earpiece mode.
●On line: Press again to pass in speakerphone mode. Press
a
g
ain to switch to earpiece mode.
23 DOWN / PHONEBOOK
●In idle mode: Press to access the phonebook.
●In menu mode: Press to scroll down the menu items.
●In phonebook list / redial list / call list: Press to scroll down the list.
●In editing mode: Press to move the cursor one character to the left.
●During a call: Press to decrease the listening volume.
●During ringing: Press to decrease the ringer volume.
24 MICROPHONE
25
VOLUME BOOST / SOS
●During a call: Press to activate/deactivate the VOLUME BOOST
function.
●In idle mode: Press and hold for 3 seconds to enter the
emergency calling sequence set in your handset.
●In SOS mode: press and hold for 2 seconds to stop the
emergency call.
26 TONE
●During a call: Press this key to increase the high frequency or
the low frequencies.
27 CANCEL / MUTE
●In main menu mode: Press to go back to idle screen.
●In sub-menu mode: Press to go back to previous menu.
●In editing/pre-dial mode: Press to delete a character / digit.
●In editing/pre-dial mode: Press and hold to delete all the
characters / digits.
●During a call: Press to mute/resume the microphone.
●In idle mode: Press to intercom another handset.
28 TALK OFF
●During a call: Press to end a call and go back to idle screen.
●In menu / editing mode: Press to go back to idle screen.
●During ringing: Press to silence the handset ringe
r
.
29 ALPHANUMERIC KEYPAD, STAR ( ), 0, and HASH/RECALL
(R)
●In predial or editing mode: Press to insert a digit / character
and R.
●During a call: Press and hold Rto make a Flash (Recall).
●0 key in idle / pre-dial mode / number editing mode: Press
and hold to insert a pause.
First use of your handset
After you have inserted the batteries, the display asks you to select your
text language with the keys ▼/▲, press to valid.
Then enter the date with the keypad and validate by pressing .
Then enter the correct hour with the keypad and validate by pressing
.
Then select your talking language with the keys ▼/▲, press to
valid.
General menu setting
The phone settings are always set in the same manner:
Press button to open the main menu.
Then use ▼/▲buttons to select an entry and confirm it by pressing the
button.
The factory preset PIN code is 0000. Example:
Set the display language on the base
Press MENU/OK , then select ▼/▲language, press MENU/OK,
then select ▼/▲desired language and then press MENU/OK to confirm.
Set the language on the handset
Press MENU/OK , then select ▼/▲HS settings, press ,
then select ▼/▲language, press , than select ▼/▲desired language and
then press to confirm.
Basemenu
CALL LOG: ►Incoming call list
PHOTO MEM: ►M1 ►M2 ►M3 ►M4
PHONEBOOK: ►ALL ►SPEED DIAL ►VIP
CALL BLOCK: ►BLACK LIST►SETTINGS(BLOCK MODE-W/O NUM)
INTERCOM: HANDSET 1-2-3 or ALL
DATE & TIME: ►DATE FORM ►TIME FORM ►SET DATE
TEXT LANG: ►ENGLISH ►FRANÇAIS ►DEUTCH ►ITALIANO
►NEDERLANDS ►ESPANOL ►PORTUGUES…
BS SETTING: ►RING SETUP ►KEY TONE ►FLASH TIME ►FIRST
RING ►DEFAULT
PAGE ALL HS
REGISTER
SET SOS: ►SOS NUMBER ►SOS MSG ►SOS LANG
REMINDER: ►ALARM 1 ►ALARM 2 ►ALARM 3 ►ALARM 4 ►ALARM
5 ►ALARM 6 ►ALARM 7 ►ALARM 8 ►ALARM 9 ►ALARM 10
TLK DIGITS: ►OFF ►ON
ANS. SYS: ►PLAYBACK ►DEL OLD ►MEMO ►TAM ON/OFF ►SET
TAM (TAM LANG, CALL SCREEN, TAM MSG, ANS. DELAY, REC. TIME,
REMOTE ACC, CHANGE PIN, MSG ALERT)
Handset menu
CALL LOG: ►RECEIVED
PHOTO MEM: ►M1 ►M2 ►M3 ►M4
PHONEBOOK: ►ALL (ADD-VIEW-EDIT-DELETE-DELETE ALL-ADD
VIP-ADD TO PM-ADD TO SD-STATUS) ►SPEED DIAL ►VIP
CALL BLOCK: ►BLACK LIST►SETTINGS(BLOCK MODE-W/O NUM)
INTERCOM: ►BASE or HANDSET X
BS SETTING: ►BS RINGER ►RING VOL ►FLASH TIME ►FIRST RING
HS SETTING: ►RING SETUP ►TONE SETUP ►AUTO BOOST ►TEXT
LANG ►DATE & TIME ►REGISTER ►DEFAULT
SET SOS: ►SOS NUMBER ►SOS MSG ►SOS LANG
REMINDER: ►ALARM 1 ►ALARM 2 ►ALARM 3 ►ALARM 4 ►ALARM
5 ►ALARM 6 ►ALARM 7 ►ALARM 8 ►ALARM 9 ►ALARM 10
TLK DIGITS: ►ON ►OFF
ANS. SYS: ►PLAYBACK ►DEL OLD ►MEMO ►TAM ON/OFF ►SET
TAM (TAM LANG, CALL SCREEN, TAM MSG, ANS. DELAY, REC. TIME,
REMOTE ACC, CHANGE PIN, MSG ALERT)
Registration
NOTE: Handset and base station are pre-registered. Up to four
handsets can be registered to a single base station.
Registration a handset
On Base: Press MENU/OK , select ▼/▲REGISTER.
Press MENU/OK to see REGISTERING... (If the registration is
successful, there will be a confirmation beep).
On Handset: Press . Use ▼/▲to select HS SETTING.
Press . Use ▼/▲to select REGISTER.
Press and REGISTERING is display.
After a short delay, if the registration is successful, there will be a
confirmation beep, and the handset display will go back to idle mode with
the new handset number shown. The base display will also go back to
idle mode.
InternalCall
On Base: Press , and ▼/▲to select HS 1 - 4.
Press MENU/OK to call the handset.
On Handset: Press CANCEL MUTE, and ▼/▲to select the
desired handset number, Base or ALL and press MENU/OK.
CallAllHandsets
Base: Press , and ▼/▲to select ALL, press MENU/OK
to connect.
On Handset: Make point 1 in chapter internal call and choose ALL.
Transfer an External Call
On Base: Press MENU/OK twice, and ▼/▲to select hanset
number, press on handset. After connection quit the call on base.
Intercom
Menu settin
g
First use of
y
our telephone
Overview
Installation
Packa
g
e contents


12345
Quick User Guide
Please refer to our website: www.geemarc.com for an up to date user
guide, as there may be important updates and changes you need to be
aware of !
Congratulations!
Congratulations on purchasing your Geemarc AMPLIDECT COMBI 595
telephone. This telephone offers all the advantages of cordless technology
(compliant with Digitally Enhanced Cordless Telecommunications- DECT
standard) together with an easy to see big button keypad, ideal for those
who suffer with poor sight. This telephone is also hearing aid compatible.
It is important that you read the instructions below in order to use your
Geemarc telephone to its full potential.
1 Telephone base, 1 Corded handset, 1 cordless Handset, 2 power adapters,
1 Charger, 1 Telephone line cord, 3 Ni-Mh batteries, 1 Quick user guide.
Connecting the telephone
Connect the telephone cable to the telephone line socket (A) and to the
telephone wall socket (B).
Connect the handset curly cord to the base(E).
Connect the power adapter jack to base and charger (C) then connect the
power adapter plug in mains power (D).
NOTE: Use only the power adapters supplied with the phone.
Connecting the battery
Slide the battery cover downwards Install the
3 batteries into the socket as indicated,
matching correct polarity (+,-).
Align the cover flat against the battery
compartment, and then slide it upwards until
it clicks into place.
Charging the batteries
Charge the batteries for at least 16 hours when charging for the first time.
Baseoverview
1 LCD DISPLAY
2 IN USE : ON during a call.
3 RING light
●Flashes when there is an incoming call.
●Steadily on when the answering machine is turned on. Flashes
when there are new memos or messages in the answering machine.
4 MENU / OK
●In idle mode: Press to access the main menu.
●In sub-menu mode: Press to confirm the selection.
●In Redial list/Call list: Press to store the number into Phonebook.
5 PHONEBOOK:
●
In idle: Press to access the phonebook.
6 CALLS (CALL LIST)
●
In idle mode: Press to access the call list.
7 INT / MUTE / CLEAR
●In main menu mode: Press to go back to idle screen.
●In sub-menu mode: Press to go back to previous level.
●In sub-menu mode: Press and hold to go back to idle screen.
●In editing / predialing mode: Press to clear a character/digit.
●In editing / predialing mode: Press and hold to delete all the
character / digits.
●During a call: Press to mute / unmute the microphone.
●In ringing: Press to silence the base ringer.
●In idle mode: Press to intercom another system handset.
8 MEMORY KEYS (3 PHOTO SPEED DIAL KEYS; 1 TONE KEY -
M4
●In idle mode: Press to dial out to the number stored in the
memory key.
●During a call: press M4 to increase the high frequency or the low
fre
q
uencies.
9 VOLUME BOOST / SOS
●During a call: Press to activate/deactivate the VOLUME BOOST
function.
●In idle mode: Press and hold for 2 seconds to launch the
emergency calling sequence set in your phone.
●In SOS mode: press and hold for 2 seconds to stop the
emer
g
enc
y
call.
10 SPEAKER
●In Idle mode or Phonebook/ Call list/ Redial list view mode:
Press to make a call with speakerphone.
11 ALPHANUMERIC KEYPAD, STAR ( ), HASH/RECALL ( /R)
●In predial or editing mode: Press to insert a digit.
●0 key in predial or editing mode: Press and hold to insert a
pause.
●On line: Press the ke
y
R/ to make a recall.
12 NAVIGATION KEYS
▲UP
●In menu mode: Press to scroll up the menu items.
●In Phonebook list / Redial list / Call list: Press to scroll up the list.
●In editing mode: Press to move the cursor one character to the
right.
●During a call or TAM message playback: Press to increase the
volume.
REPEAT / OGM
●In Idle mode: Press and hold 2 sec until beep to record OGM.
●Press /to stop the recording.
●In TAM message playback mode: Press to go back to previous
message.
MEMO / SKIP FORWARD
●In Idle mode: Press and hold 2 sec until beep to record a memo
and press /to stop the recording.
●In TAM message playback mode: Press to skip to next message.
DOWN / REDIAL LIST
●In Idle mode: Press to access the redial list.
●In menu mode: Press to scroll down the menu items.
●In Phonebook list / Redial list / Call list view mode: Press to
scroll down the list.
●In editing mode: Press to move the cursor one character to the left.
●During a call or TAM message playback: Press to decrease the
volume.
13 /PLAY / STOP
●In Idle mode: Press to playback messages.
●During TAM message playback: Press to stop playing messages.
14 SLOW
●During TAM MSG playback: Press to playback messages in slow
speed.
15 DELETE
●In TAM message playback mode: Press to delete the current
TAM message playback.
●In idle mode: Press and hold to delete all old messages.
16 ANS ON / OFF
●In Idle: Press to switch the answering machine ON or OFF.
●The cassette tape icon is displayed on the screen if activate.
Handsetoverview
17 EARPIECE
18 LCD DISPLAY
19 CHARGE LIGHT
●
Steadil
y
on when the handset is char
g
in
g
in the char
g
e
r
.
20 MENU / OK
●In idle mode: Press to access the main menu.
●In sub-menu mode: Press to confirm the selection.
●During a call: Press to access Intercom/ Phonebook / Redial list
/
Call lo
g
/Record call.
21 UP / CALL LIST
●In idle mode: Press to access the redial list.
●In menu mode: Press to scroll up the menu items.
●In phonebook list / redial list / call list: Press to scroll up the list.
●In editing mode: Press to move the cursor one character to the
right.
●During a call: Press to increase the listening volume.
●During ringing: Press to increase the ringer volume.
22 TALK ON / SPEAKERPHONE
●In idle/pre-dial mode: Press to make a call in earpiece mode.
●In phonebook/redial list /call list: Press to make a call to the
selected entry in the list in earpiece mode.
●During ringing: Press to answer a call in earpiece mode.
●On line: Press again to pass in speakerphone mode. Press
a
g
ain to switch to earpiece mode.
23 DOWN / PHONEBOOK
●In idle mode: Press to access the phonebook.
●In menu mode: Press to scroll down the menu items.
●In phonebook list / redial list / call list: Press to scroll down the list.
●In editing mode: Press to move the cursor one character to the left.
●During a call: Press to decrease the listening volume.
●During ringing: Press to decrease the ringer volume.
24 MICROPHONE
25
VOLUME BOOST / SOS
●During a call: Press to activate/deactivate the VOLUME BOOST
function.
●In idle mode: Press and hold for 3 seconds to enter the
emergency calling sequence set in your handset.
●In SOS mode: press and hold for 2 seconds to stop the
emergency call.
26 TONE
●During a call: Press this key to increase the high frequency or
the low frequencies.
27 CANCEL / MUTE
●In main menu mode: Press to go back to idle screen.
●In sub-menu mode: Press to go back to previous menu.
●In editing/pre-dial mode: Press to delete a character / digit.
●In editing/pre-dial mode: Press and hold to delete all the
characters / digits.
●During a call: Press to mute/resume the microphone.
●In idle mode: Press to intercom another handset.
28 TALK OFF
●During a call: Press to end a call and go back to idle screen.
●In menu / editing mode: Press to go back to idle screen.
●During ringing: Press to silence the handset ringe
r
.
29 ALPHANUMERIC KEYPAD, STAR ( ), 0, and HASH/RECALL
(R)
●In predial or editing mode: Press to insert a digit / character
and R.
●During a call: Press and hold Rto make a Flash (Recall).
●0 key in idle / pre-dial mode / number editing mode: Press
and hold to insert a pause.
First use of your handset
After you have inserted the batteries, the display asks you to select your
text language with the keys ▼/▲, press to valid.
Then enter the date with the keypad and validate by pressing .
Then enter the correct hour with the keypad and validate by pressing
.
Then select your talking language with the keys ▼/▲, press to
valid.
General menu setting
The phone settings are always set in the same manner:
Press button to open the main menu.
Then use ▼/▲buttons to select an entry and confirm it by pressing the
button.
The factory preset PIN code is 0000. Example:
Set the display language on the base
Press MENU/OK , then select ▼/▲language, press MENU/OK,
then select ▼/▲desired language and then press MENU/OK to confirm.
Set the language on the handset
Press MENU/OK , then select ▼/▲HS settings, press ,
then select ▼/▲language, press , than select ▼/▲desired language and
then press to confirm.
Basemenu
CALL LOG: ►Incoming call list
PHOTO MEM: ►M1 ►M2 ►M3 ►M4
PHONEBOOK: ►ALL ►SPEED DIAL ►VIP
CALL BLOCK: ►BLACK LIST►SETTINGS(BLOCK MODE-W/O NUM)
INTERCOM: HANDSET 1-2-3 or ALL
DATE & TIME: ►DATE FORM ►TIME FORM ►SET DATE
TEXT LANG: ►ENGLISH ►FRANÇAIS ►DEUTCH ►ITALIANO
►NEDERLANDS ►ESPANOL ►PORTUGUES…
BS SETTING: ►RING SETUP ►KEY TONE ►FLASH TIME ►FIRST
RING ►DEFAULT
PAGE ALL HS
REGISTER
SET SOS: ►SOS NUMBER ►SOS MSG ►SOS LANG
REMINDER: ►ALARM 1 ►ALARM 2 ►ALARM 3 ►ALARM 4 ►ALARM
5 ►ALARM 6 ►ALARM 7 ►ALARM 8 ►ALARM 9 ►ALARM 10
TLK DIGITS: ►OFF ►ON
ANS. SYS: ►PLAYBACK ►DEL OLD ►MEMO ►TAM ON/OFF ►SET
TAM (TAM LANG, CALL SCREEN, TAM MSG, ANS. DELAY, REC. TIME,
REMOTE ACC, CHANGE PIN, MSG ALERT)
Handset menu
CALL LOG: ►RECEIVED
PHOTO MEM: ►M1 ►M2 ►M3 ►M4
PHONEBOOK: ►ALL (ADD-VIEW-EDIT-DELETE-DELETE ALL-ADD
VIP-ADD TO PM-ADD TO SD-STATUS) ►SPEED DIAL ►VIP
CALL BLOCK: ►BLACK LIST►SETTINGS(BLOCK MODE-W/O NUM)
INTERCOM: ►BASE or HANDSET X
BS SETTING: ►BS RINGER ►RING VOL ►FLASH TIME ►FIRST RING
HS SETTING: ►RING SETUP ►TONE SETUP ►AUTO BOOST ►TEXT
LANG ►DATE & TIME ►REGISTER ►DEFAULT
SET SOS: ►SOS NUMBER ►SOS MSG ►SOS LANG
REMINDER: ►ALARM 1 ►ALARM 2 ►ALARM 3 ►ALARM 4 ►ALARM
5 ►ALARM 6 ►ALARM 7 ►ALARM 8 ►ALARM 9 ►ALARM 10
TLK DIGITS: ►ON ►OFF
ANS. SYS: ►PLAYBACK ►DEL OLD ►MEMO ►TAM ON/OFF ►SET
TAM (TAM LANG, CALL SCREEN, TAM MSG, ANS. DELAY, REC. TIME,
REMOTE ACC, CHANGE PIN, MSG ALERT)
Registration
NOTE: Handset and base station are pre-registered. Up to four
handsets can be registered to a single base station.
Registration a handset
On Base: Press MENU/OK , select ▼/▲REGISTER.
Press MENU/OK to see REGISTERING... (If the registration is
successful, there will be a confirmation beep).
On Handset: Press . Use ▼/▲to select HS SETTING.
Press . Use ▼/▲to select REGISTER.
Press and REGISTERING is display.
After a short delay, if the registration is successful, there will be a
confirmation beep, and the handset display will go back to idle mode with
the new handset number shown. The base display will also go back to
idle mode.
InternalCall
On Base: Press , and ▼/▲to select HS 1 - 4.
Press MENU/OK to call the handset.
On Handset: Press CANCEL MUTE, and ▼/▲to select the
desired handset number, Base or ALL and press MENU/OK.
CallAllHandsets
Base: Press , and ▼/▲to select ALL, press MENU/OK
to connect.
On Handset: Make point 1 in chapter internal call and choose ALL.
Transfer an External Call
On Base: Press MENU/OK twice, and ▼/▲to select hanset
number, press on handset. After connection quit the call on base.
Intercom
Menu settin
g
First use of
y
our telephone
Overview
Installation
Packa
g
e contents


12345
Quick User Guide
Please refer to our website: www.geemarc.com for an up to date user
guide, as there may be important updates and changes you need to be
aware of !
Congratulations!
Congratulations on purchasing your Geemarc AMPLIDECT COMBI 595
telephone. This telephone offers all the advantages of cordless technology
(compliant with Digitally Enhanced Cordless Telecommunications- DECT
standard) together with an easy to see big button keypad, ideal for those
who suffer with poor sight. This telephone is also hearing aid compatible.
It is important that you read the instructions below in order to use your
Geemarc telephone to its full potential.
1 Telephone base, 1 Corded handset, 1 cordless Handset, 2 power adapters,
1 Charger, 1 Telephone line cord, 3 Ni-Mh batteries, 1 Quick user guide.
Connecting the telephone
Connect the telephone cable to the telephone line socket (A) and to the
telephone wall socket (B).
Connect the handset curly cord to the base(E).
Connect the power adapter jack to base and charger (C) then connect the
power adapter plug in mains power (D).
NOTE: Use only the power adapters supplied with the phone.
Connecting the battery
Slide the battery cover downwards Install the
3 batteries into the socket as indicated,
matching correct polarity (+,-).
Align the cover flat against the battery
compartment, and then slide it upwards until
it clicks into place.
Charging the batteries
Charge the batteries for at least 16 hours when charging for the first time.
Baseoverview
1 LCD DISPLAY
2 IN USE : ON during a call.
3 RING light
●Flashes when there is an incoming call.
●Steadily on when the answering machine is turned on. Flashes
when there are new memos or messages in the answering machine.
4 MENU / OK
●In idle mode: Press to access the main menu.
●In sub-menu mode: Press to confirm the selection.
●In Redial list/Call list: Press to store the number into Phonebook.
5 PHONEBOOK:
●
In idle: Press to access the phonebook.
6 CALLS (CALL LIST)
●
In idle mode: Press to access the call list.
7 INT / MUTE / CLEAR
●In main menu mode: Press to go back to idle screen.
●In sub-menu mode: Press to go back to previous level.
●In sub-menu mode: Press and hold to go back to idle screen.
●In editing / predialing mode: Press to clear a character/digit.
●In editing / predialing mode: Press and hold to delete all the
character / digits.
●During a call: Press to mute / unmute the microphone.
●In ringing: Press to silence the base ringer.
●In idle mode: Press to intercom another system handset.
8 MEMORY KEYS (3 PHOTO SPEED DIAL KEYS; 1 TONE KEY -
M4
●In idle mode: Press to dial out to the number stored in the
memory key.
●During a call: press M4 to increase the high frequency or the low
fre
q
uencies.
9 VOLUME BOOST / SOS
●During a call: Press to activate/deactivate the VOLUME BOOST
function.
●In idle mode: Press and hold for 2 seconds to launch the
emergency calling sequence set in your phone.
●In SOS mode: press and hold for 2 seconds to stop the
emer
g
enc
y
call.
10 SPEAKER
●In Idle mode or Phonebook/ Call list/ Redial list view mode:
Press to make a call with speakerphone.
11 ALPHANUMERIC KEYPAD, STAR ( ), HASH/RECALL ( /R)
●In predial or editing mode: Press to insert a digit.
●0 key in predial or editing mode: Press and hold to insert a
pause.
●On line: Press the ke
y
R/ to make a recall.
12 NAVIGATION KEYS
▲UP
●In menu mode: Press to scroll up the menu items.
●In Phonebook list / Redial list / Call list: Press to scroll up the list.
●In editing mode: Press to move the cursor one character to the
right.
●During a call or TAM message playback: Press to increase the
volume.
REPEAT / OGM
●In Idle mode: Press and hold 2 sec until beep to record OGM.
●Press /to stop the recording.
●In TAM message playback mode: Press to go back to previous
message.
MEMO / SKIP FORWARD
●In Idle mode: Press and hold 2 sec until beep to record a memo
and press /to stop the recording.
●In TAM message playback mode: Press to skip to next message.
DOWN / REDIAL LIST
●In Idle mode: Press to access the redial list.
●In menu mode: Press to scroll down the menu items.
●In Phonebook list / Redial list / Call list view mode: Press to
scroll down the list.
●In editing mode: Press to move the cursor one character to the left.
●During a call or TAM message playback: Press to decrease the
volume.
13 /PLAY / STOP
●In Idle mode: Press to playback messages.
●During TAM message playback: Press to stop playing messages.
14 SLOW
●During TAM MSG playback: Press to playback messages in slow
speed.
15 DELETE
●In TAM message playback mode: Press to delete the current
TAM message playback.
●In idle mode: Press and hold to delete all old messages.
16 ANS ON / OFF
●In Idle: Press to switch the answering machine ON or OFF.
●The cassette tape icon is displayed on the screen if activate.
Handsetoverview
17 EARPIECE
18 LCD DISPLAY
19 CHARGE LIGHT
●
Steadil
y
on when the handset is char
g
in
g
in the char
g
e
r
.
20 MENU / OK
●In idle mode: Press to access the main menu.
●In sub-menu mode: Press to confirm the selection.
●During a call: Press to access Intercom/ Phonebook / Redial list
/
Call lo
g
/Record call.
21 UP / CALL LIST
●In idle mode: Press to access the redial list.
●In menu mode: Press to scroll up the menu items.
●In phonebook list / redial list / call list: Press to scroll up the list.
●In editing mode: Press to move the cursor one character to the
right.
●During a call: Press to increase the listening volume.
●During ringing: Press to increase the ringer volume.
22 TALK ON / SPEAKERPHONE
●In idle/pre-dial mode: Press to make a call in earpiece mode.
●In phonebook/redial list /call list: Press to make a call to the
selected entry in the list in earpiece mode.
●During ringing: Press to answer a call in earpiece mode.
●On line: Press again to pass in speakerphone mode. Press
a
g
ain to switch to earpiece mode.
23 DOWN / PHONEBOOK
●In idle mode: Press to access the phonebook.
●In menu mode: Press to scroll down the menu items.
●In phonebook list / redial list / call list: Press to scroll down the list.
●In editing mode: Press to move the cursor one character to the left.
●During a call: Press to decrease the listening volume.
●During ringing: Press to decrease the ringer volume.
24 MICROPHONE
25
VOLUME BOOST / SOS
●During a call: Press to activate/deactivate the VOLUME BOOST
function.
●In idle mode: Press and hold for 3 seconds to enter the
emergency calling sequence set in your handset.
●In SOS mode: press and hold for 2 seconds to stop the
emergency call.
26 TONE
●During a call: Press this key to increase the high frequency or
the low frequencies.
27 CANCEL / MUTE
●In main menu mode: Press to go back to idle screen.
●In sub-menu mode: Press to go back to previous menu.
●In editing/pre-dial mode: Press to delete a character / digit.
●In editing/pre-dial mode: Press and hold to delete all the
characters / digits.
●During a call: Press to mute/resume the microphone.
●In idle mode: Press to intercom another handset.
28 TALK OFF
●During a call: Press to end a call and go back to idle screen.
●In menu / editing mode: Press to go back to idle screen.
●During ringing: Press to silence the handset ringe
r
.
29 ALPHANUMERIC KEYPAD, STAR ( ), 0, and HASH/RECALL
(R)
●In predial or editing mode: Press to insert a digit / character
and R.
●During a call: Press and hold Rto make a Flash (Recall).
●0 key in idle / pre-dial mode / number editing mode: Press
and hold to insert a pause.
First use of your handset
After you have inserted the batteries, the display asks you to select your
text language with the keys ▼/▲, press to valid.
Then enter the date with the keypad and validate by pressing .
Then enter the correct hour with the keypad and validate by pressing
.
Then select your talking language with the keys ▼/▲, press to
valid.
General menu setting
The phone settings are always set in the same manner:
Press button to open the main menu.
Then use ▼/▲buttons to select an entry and confirm it by pressing the
button.
The factory preset PIN code is 0000. Example:
Set the display language on the base
Press MENU/OK , then select ▼/▲language, press MENU/OK,
then select ▼/▲desired language and then press MENU/OK to confirm.
Set the language on the handset
Press MENU/OK , then select ▼/▲HS settings, press ,
then select ▼/▲language, press , than select ▼/▲desired language and
then press to confirm.
Basemenu
CALL LOG: ►Incoming call list
PHOTO MEM: ►M1 ►M2 ►M3 ►M4
PHONEBOOK: ►ALL ►SPEED DIAL ►VIP
CALL BLOCK: ►BLACK LIST►SETTINGS(BLOCK MODE-W/O NUM)
INTERCOM: HANDSET 1-2-3 or ALL
DATE & TIME: ►DATE FORM ►TIME FORM ►SET DATE
TEXT LANG: ►ENGLISH ►FRANÇAIS ►DEUTCH ►ITALIANO
►NEDERLANDS ►ESPANOL ►PORTUGUES…
BS SETTING: ►RING SETUP ►KEY TONE ►FLASH TIME ►FIRST
RING ►DEFAULT
PAGE ALL HS
REGISTER
SET SOS: ►SOS NUMBER ►SOS MSG ►SOS LANG
REMINDER: ►ALARM 1 ►ALARM 2 ►ALARM 3 ►ALARM 4 ►ALARM
5 ►ALARM 6 ►ALARM 7 ►ALARM 8 ►ALARM 9 ►ALARM 10
TLK DIGITS: ►OFF ►ON
ANS. SYS: ►PLAYBACK ►DEL OLD ►MEMO ►TAM ON/OFF ►SET
TAM (TAM LANG, CALL SCREEN, TAM MSG, ANS. DELAY, REC. TIME,
REMOTE ACC, CHANGE PIN, MSG ALERT)
Handset menu
CALL LOG: ►RECEIVED
PHOTO MEM: ►M1 ►M2 ►M3 ►M4
PHONEBOOK: ►ALL (ADD-VIEW-EDIT-DELETE-DELETE ALL-ADD
VIP-ADD TO PM-ADD TO SD-STATUS) ►SPEED DIAL ►VIP
CALL BLOCK: ►BLACK LIST►SETTINGS(BLOCK MODE-W/O NUM)
INTERCOM: ►BASE or HANDSET X
BS SETTING: ►BS RINGER ►RING VOL ►FLASH TIME ►FIRST RING
HS SETTING: ►RING SETUP ►TONE SETUP ►AUTO BOOST ►TEXT
LANG ►DATE & TIME ►REGISTER ►DEFAULT
SET SOS: ►SOS NUMBER ►SOS MSG ►SOS LANG
REMINDER: ►ALARM 1 ►ALARM 2 ►ALARM 3 ►ALARM 4 ►ALARM
5 ►ALARM 6 ►ALARM 7 ►ALARM 8 ►ALARM 9 ►ALARM 10
TLK DIGITS: ►ON ►OFF
ANS. SYS: ►PLAYBACK ►DEL OLD ►MEMO ►TAM ON/OFF ►SET
TAM (TAM LANG, CALL SCREEN, TAM MSG, ANS. DELAY, REC. TIME,
REMOTE ACC, CHANGE PIN, MSG ALERT)
Registration
NOTE: Handset and base station are pre-registered. Up to four
handsets can be registered to a single base station.
Registration a handset
On Base: Press MENU/OK , select ▼/▲REGISTER.
Press MENU/OK to see REGISTERING... (If the registration is
successful, there will be a confirmation beep).
On Handset: Press . Use ▼/▲to select HS SETTING.
Press . Use ▼/▲to select REGISTER.
Press and REGISTERING is display.
After a short delay, if the registration is successful, there will be a
confirmation beep, and the handset display will go back to idle mode with
the new handset number shown. The base display will also go back to
idle mode.
InternalCall
On Base: Press , and ▼/▲to select HS 1 - 4.
Press MENU/OK to call the handset.
On Handset: Press CANCEL MUTE, and ▼/▲to select the
desired handset number, Base or ALL and press MENU/OK.
CallAllHandsets
Base: Press , and ▼/▲to select ALL, press MENU/OK
to connect.
On Handset: Make point 1 in chapter internal call and choose ALL.
Transfer an External Call
On Base: Press MENU/OK twice, and ▼/▲to select hanset
number, press on handset. After connection quit the call on base.
Intercom
Menu settin
g
First use of
y
our telephone
Overview
Installation
Packa
g
e contents


12345
Quick User Guide
Please refer to our website: www.geemarc.com for an up to date user
guide, as there may be important updates and changes you need to be
aware of !
Congratulations!
Congratulations on purchasing your Geemarc AMPLIDECT COMBI 595
telephone. This telephone offers all the advantages of cordless technology
(compliant with Digitally Enhanced Cordless Telecommunications- DECT
standard) together with an easy to see big button keypad, ideal for those
who suffer with poor sight. This telephone is also hearing aid compatible.
It is important that you read the instructions below in order to use your
Geemarc telephone to its full potential.
1 Telephone base, 1 Corded handset, 1 cordless Handset, 2 power adapters,
1 Charger, 1 Telephone line cord, 3 Ni-Mh batteries, 1 Quick user guide.
Connecting the telephone
Connect the telephone cable to the telephone line socket (A) and to the
telephone wall socket (B).
Connect the handset curly cord to the base(E).
Connect the power adapter jack to base and charger (C) then connect the
power adapter plug in mains power (D).
NOTE: Use only the power adapters supplied with the phone.
Connecting the battery
Slide the battery cover downwards Install the
3 batteries into the socket as indicated,
matching correct polarity (+,-).
Align the cover flat against the battery
compartment, and then slide it upwards until
it clicks into place.
Charging the batteries
Charge the batteries for at least 16 hours when charging for the first time.
Baseoverview
1 LCD DISPLAY
2 IN USE : ON during a call.
3 RING light
●Flashes when there is an incoming call.
●Steadily on when the answering machine is turned on. Flashes
when there are new memos or messages in the answering machine.
4 MENU / OK
●In idle mode: Press to access the main menu.
●In sub-menu mode: Press to confirm the selection.
●In Redial list/Call list: Press to store the number into Phonebook.
5 PHONEBOOK:
●
In idle: Press to access the phonebook.
6 CALLS (CALL LIST)
●
In idle mode: Press to access the call list.
7 INT / MUTE / CLEAR
●In main menu mode: Press to go back to idle screen.
●In sub-menu mode: Press to go back to previous level.
●In sub-menu mode: Press and hold to go back to idle screen.
●In editing / predialing mode: Press to clear a character/digit.
●In editing / predialing mode: Press and hold to delete all the
character / digits.
●During a call: Press to mute / unmute the microphone.
●In ringing: Press to silence the base ringer.
●In idle mode: Press to intercom another system handset.
8 MEMORY KEYS (3 PHOTO SPEED DIAL KEYS; 1 TONE KEY -
M4
●In idle mode: Press to dial out to the number stored in the
memory key.
●During a call: press M4 to increase the high frequency or the low
fre
q
uencies.
9 VOLUME BOOST / SOS
●During a call: Press to activate/deactivate the VOLUME BOOST
function.
●In idle mode: Press and hold for 2 seconds to launch the
emergency calling sequence set in your phone.
●In SOS mode: press and hold for 2 seconds to stop the
emer
g
enc
y
call.
10 SPEAKER
●In Idle mode or Phonebook/ Call list/ Redial list view mode:
Press to make a call with speakerphone.
11 ALPHANUMERIC KEYPAD, STAR ( ), HASH/RECALL ( /R)
●In predial or editing mode: Press to insert a digit.
●0 key in predial or editing mode: Press and hold to insert a
pause.
●On line: Press the ke
y
R/ to make a recall.
12 NAVIGATION KEYS
▲UP
●In menu mode: Press to scroll up the menu items.
●In Phonebook list / Redial list / Call list: Press to scroll up the list.
●In editing mode: Press to move the cursor one character to the
right.
●During a call or TAM message playback: Press to increase the
volume.
REPEAT / OGM
●In Idle mode: Press and hold 2 sec until beep to record OGM.
●Press /to stop the recording.
●In TAM message playback mode: Press to go back to previous
message.
MEMO / SKIP FORWARD
●In Idle mode: Press and hold 2 sec until beep to record a memo
and press /to stop the recording.
●In TAM message playback mode: Press to skip to next message.
DOWN / REDIAL LIST
●In Idle mode: Press to access the redial list.
●In menu mode: Press to scroll down the menu items.
●In Phonebook list / Redial list / Call list view mode: Press to
scroll down the list.
●In editing mode: Press to move the cursor one character to the left.
●During a call or TAM message playback: Press to decrease the
volume.
13 /PLAY / STOP
●In Idle mode: Press to playback messages.
●During TAM message playback: Press to stop playing messages.
14 SLOW
●During TAM MSG playback: Press to playback messages in slow
speed.
15 DELETE
●In TAM message playback mode: Press to delete the current
TAM message playback.
●In idle mode: Press and hold to delete all old messages.
16 ANS ON / OFF
●In Idle: Press to switch the answering machine ON or OFF.
●The cassette tape icon is displayed on the screen if activate.
Handsetoverview
17 EARPIECE
18 LCD DISPLAY
19 CHARGE LIGHT
●
Steadil
y
on when the handset is char
g
in
g
in the char
g
e
r
.
20 MENU / OK
●In idle mode: Press to access the main menu.
●In sub-menu mode: Press to confirm the selection.
●During a call: Press to access Intercom/ Phonebook / Redial list
/
Call lo
g
/Record call.
21 UP / CALL LIST
●In idle mode: Press to access the redial list.
●In menu mode: Press to scroll up the menu items.
●In phonebook list / redial list / call list: Press to scroll up the list.
●In editing mode: Press to move the cursor one character to the
right.
●During a call: Press to increase the listening volume.
●During ringing: Press to increase the ringer volume.
22 TALK ON / SPEAKERPHONE
●In idle/pre-dial mode: Press to make a call in earpiece mode.
●In phonebook/redial list /call list: Press to make a call to the
selected entry in the list in earpiece mode.
●During ringing: Press to answer a call in earpiece mode.
●On line: Press again to pass in speakerphone mode. Press
a
g
ain to switch to earpiece mode.
23 DOWN / PHONEBOOK
●In idle mode: Press to access the phonebook.
●In menu mode: Press to scroll down the menu items.
●In phonebook list / redial list / call list: Press to scroll down the list.
●In editing mode: Press to move the cursor one character to the left.
●During a call: Press to decrease the listening volume.
●During ringing: Press to decrease the ringer volume.
24 MICROPHONE
25
VOLUME BOOST / SOS
●During a call: Press to activate/deactivate the VOLUME BOOST
function.
●In idle mode: Press and hold for 3 seconds to enter the
emergency calling sequence set in your handset.
●In SOS mode: press and hold for 2 seconds to stop the
emergency call.
26 TONE
●During a call: Press this key to increase the high frequency or
the low frequencies.
27 CANCEL / MUTE
●In main menu mode: Press to go back to idle screen.
●In sub-menu mode: Press to go back to previous menu.
●In editing/pre-dial mode: Press to delete a character / digit.
●In editing/pre-dial mode: Press and hold to delete all the
characters / digits.
●During a call: Press to mute/resume the microphone.
●In idle mode: Press to intercom another handset.
28 TALK OFF
●During a call: Press to end a call and go back to idle screen.
●In menu / editing mode: Press to go back to idle screen.
●During ringing: Press to silence the handset ringe
r
.
29 ALPHANUMERIC KEYPAD, STAR ( ), 0, and HASH/RECALL
(R)
●In predial or editing mode: Press to insert a digit / character
and R.
●During a call: Press and hold Rto make a Flash (Recall).
●0 key in idle / pre-dial mode / number editing mode: Press
and hold to insert a pause.
First use of your handset
After you have inserted the batteries, the display asks you to select your
text language with the keys ▼/▲, press to valid.
Then enter the date with the keypad and validate by pressing .
Then enter the correct hour with the keypad and validate by pressing
.
Then select your talking language with the keys ▼/▲, press to
valid.
General menu setting
The phone settings are always set in the same manner:
Press button to open the main menu.
Then use ▼/▲buttons to select an entry and confirm it by pressing the
button.
The factory preset PIN code is 0000. Example:
Set the display language on the base
Press MENU/OK , then select ▼/▲language, press MENU/OK,
then select ▼/▲desired language and then press MENU/OK to confirm.
Set the language on the handset
Press MENU/OK , then select ▼/▲HS settings, press ,
then select ▼/▲language, press , than select ▼/▲desired language and
then press to confirm.
Basemenu
CALL LOG: ►Incoming call list
PHOTO MEM: ►M1 ►M2 ►M3 ►M4
PHONEBOOK: ►ALL ►SPEED DIAL ►VIP
CALL BLOCK: ►BLACK LIST►SETTINGS(BLOCK MODE-W/O NUM)
INTERCOM: HANDSET 1-2-3 or ALL
DATE & TIME: ►DATE FORM ►TIME FORM ►SET DATE
TEXT LANG: ►ENGLISH ►FRANÇAIS ►DEUTCH ►ITALIANO
►NEDERLANDS ►ESPANOL ►PORTUGUES…
BS SETTING: ►RING SETUP ►KEY TONE ►FLASH TIME ►FIRST
RING ►DEFAULT
PAGE ALL HS
REGISTER
SET SOS: ►SOS NUMBER ►SOS MSG ►SOS LANG
REMINDER: ►ALARM 1 ►ALARM 2 ►ALARM 3 ►ALARM 4 ►ALARM
5 ►ALARM 6 ►ALARM 7 ►ALARM 8 ►ALARM 9 ►ALARM 10
TLK DIGITS: ►OFF ►ON
ANS. SYS: ►PLAYBACK ►DEL OLD ►MEMO ►TAM ON/OFF ►SET
TAM (TAM LANG, CALL SCREEN, TAM MSG, ANS. DELAY, REC. TIME,
REMOTE ACC, CHANGE PIN, MSG ALERT)
Handset menu
CALL LOG: ►RECEIVED
PHOTO MEM: ►M1 ►M2 ►M3 ►M4
PHONEBOOK: ►ALL (ADD-VIEW-EDIT-DELETE-DELETE ALL-ADD
VIP-ADD TO PM-ADD TO SD-STATUS) ►SPEED DIAL ►VIP
CALL BLOCK: ►BLACK LIST►SETTINGS(BLOCK MODE-W/O NUM)
INTERCOM: ►BASE or HANDSET X
BS SETTING: ►BS RINGER ►RING VOL ►FLASH TIME ►FIRST RING
HS SETTING: ►RING SETUP ►TONE SETUP ►AUTO BOOST ►TEXT
LANG ►DATE & TIME ►REGISTER ►DEFAULT
SET SOS: ►SOS NUMBER ►SOS MSG ►SOS LANG
REMINDER: ►ALARM 1 ►ALARM 2 ►ALARM 3 ►ALARM 4 ►ALARM
5 ►ALARM 6 ►ALARM 7 ►ALARM 8 ►ALARM 9 ►ALARM 10
TLK DIGITS: ►ON ►OFF
ANS. SYS: ►PLAYBACK ►DEL OLD ►MEMO ►TAM ON/OFF ►SET
TAM (TAM LANG, CALL SCREEN, TAM MSG, ANS. DELAY, REC. TIME,
REMOTE ACC, CHANGE PIN, MSG ALERT)
Registration
NOTE: Handset and base station are pre-registered. Up to four
handsets can be registered to a single base station.
Registration a handset
On Base: Press MENU/OK , select ▼/▲REGISTER.
Press MENU/OK to see REGISTERING... (If the registration is
successful, there will be a confirmation beep).
On Handset: Press . Use ▼/▲to select HS SETTING.
Press . Use ▼/▲to select REGISTER.
Press and REGISTERING is display.
After a short delay, if the registration is successful, there will be a
confirmation beep, and the handset display will go back to idle mode with
the new handset number shown. The base display will also go back to
idle mode.
InternalCall
On Base: Press , and ▼/▲to select HS 1 - 4.
Press MENU/OK to call the handset.
On Handset: Press CANCEL MUTE, and ▼/▲to select the
desired handset number, Base or ALL and press MENU/OK.
CallAllHandsets
Base: Press , and ▼/▲to select ALL, press MENU/OK
to connect.
On Handset: Make point 1 in chapter internal call and choose ALL.
Transfer an External Call
On Base: Press MENU/OK twice, and ▼/▲to select hanset
number, press on handset. After connection quit the call on base.
Intercom
Menu settin
g
First use of
y
our telephone
Overview
Installation
Packa
g
e contents


678910
On Handset:
1. Press MENU/OK, and ▼/▲to select INTERCOM. Press
MENU/OK.
2. Choose the desired handset number, Base or ALL and press
MENU/OK.
After connection quit the call on handset by pressing .
ConferenceCall
On Handset or Base: Make procedure in chapter external call and choose
the desired handset number with the key
▼/▲.
After connection press and hold until CONFERENCE is shown.
NOTE: Any party that hangs up during a conference call will leave the
other party still connected with the external call.
Your phone can store up to 50 private phonebooks with names and
numbers. Each phonebook entry can have a maximum of 20 digits for
the phone number and 10 characters for the name.
Phonebook entries are stored alphabetically by name and are identical in
the base and handset.
To add new entry
In idle mode:
On Base:
1. Press MENU/OK, and ▼/▲to select PHONEBOOK and press
twice MENU/OK to access the phonebook list (or empty).
2. Press MENU/OK and select ADD.
3. Press MENU/OK then enter phone number.
4. Press MENU/OK and enter the name.
5. Press MENU/OK to save.
On handset:
1. Press , and ▼/▲to select PHONEBOOK and press
twice to access the phonebook list (or empty).
2. Press and select ADD.
3. Press then enter phone number.
4. Press and enter the name.
5. Press to save.
OnHandset
1. Press MENU/OK and ▲/▼to select PHONEBOOK.
2. Press MENU/OK and ▲/▼to select SPEED DIAL.
3. Press MENU/OK, use. ▲/▼to select the speed dial key.
4. Press MENU/OK, select ADD or EDIT.
5. Press MENU/OK then enter the phone number.
6. Press MENU/OK then enter the NAME.
7. Press MENU/OK to confirm.
To use one speed dial key, press and hold in idle mode the key between
1 to 9 for 3 seconds (you hear a beep of confirmation). It is the same
speed dial keys for the base and for the handsets cordless.
SOSsettings
You need to set the SOS numbers before you can make SOS emergency
calls.
On Base:
1. Press MENU/OK, and ▼/▲to select SET SOS.
2. Press MENU/OK, and ▼/▲to select SOS NUMBER.
3. Press MENU/OK and ▼/▲to select the SOS number to edit
(SOS 1, SOS 2, SOS 3 or SOS 4).
4. Press MENU/OK and select ADD to enter a new number or EDIT
to modify the number stored already.
5. Press MENU/OK and enter a phone number or edit the number
stored already.
6. Press MENU/OK and enter a new name or edit the name stored
already.
7. Press MENU/OK to confirm or to delete.
On handset:
1. Press , and ▼/▲to select SET SOS.
2. Press , and ▼/▲to select SOS NUMBER.
3. Press and ▼/▲to select the SOS number to edit (SOS 1,
SOS 2, SOS 3 or SOS 4).
4. Press and select ADD to enter a new number or EDIT to
modify the number stored already.
5. Press and enter a phone number or edit the number stored
already.
6. Press and enter a new name or edit the name stored already.
7. Press to confirm or to delete.
Make SOS emergency calls
On Base
Press and hold 2seconds on the base to launch the
emergency calling sequence from the SOS 1 number to SOS 4 number. A
call will be first dialed to the SOS 1 number. If the SOS 1 number does
not answer in 60 seconds, the call be will made to the SOS 2 number,
and so on. See note.
On handset
Press and hold 3seconds on the handset to launch the emergency
calling sequence from the SOS 1 number to SOS 4 number. A call will be
first dialed to the SOS 1 number. If the SOS 1 number does not answer in
60 seconds, the call be will made to the SOS 2 number, and so on. See note.
NOTE:
●The other party receiving the SOS message must press any number on
their phone to open the SOS call. Thereafter by pressing any number
on their phone every two minutes will keep the emergency call open
else the phone stops the call 10 seconds after.
●To stop the procedure launch by error, press and hold the SOS key
until the alarm SOS stop.
Record SOS messages
You can record your customized SOS message to be played when you
dial out an SOS emergency call otherwise the default message will be
played.
On Base
1. Press MENU/OK, and ▼/▲to select SET SOS.
2. Press MENU/OK, and ▼/▲to select SOS MSG.
3. Press MENU/OK and ▼/▲to select RECORD.
4. Press MENU/OK to start SOS message recording and
“RECORDING ANNC...” will be displayed.
5. Press MENU/OK to save your SOS message.
On handset:
1. Press , and ▼/▲to select SET SOS.
2. Press , and ▼/▲to select SOS MSG.
3. Press and ▼/▲to select RECORD.
4. Press to start SOS message recording and “RECORDING” will
be displayed.
5. Press to save your SOS message.
Play SOS messages
On Base
1. Press MENU/OK, and ▼/▲to select SET SOS.
2. Press MENU/OK, and ▼/▲to select SOS MSG.
3. Press MENU/OK and ▼/▲to select PLAY.
4. Press MENU/OK to to start SOS message playback.
5. Press /PLAY/STOP to stop SOS message playback.
On handset:
1. Press , and ▼/▲to select SET SOS.
2. Press , and ▼/▲to select SOS MSG.
3. Press and ▼/▲to select PLAY.
4. Press to start SOS message playback.
5. Press or 5key to stop SOS message playback.
You have the choice to store 3 picture memories and one direct memory
on the base.
On Base:
1. Press MENU/OK, and ▼/▲to select PHOTO MEM.
2. Press MENU/OK, and ▼/▲to select M1 to M4.
3. Press MENU/OK and ▼/▲to select ADD or EDIT and VOICE
TAG.
4. Press MENU/OK then enter number.
5. Press MENU/OK then enter name.
6. Press MENU/OK to save.
On handset:
1. Press , and ▼/▲to select PHOTO MEM.
2. Press , and ▼/▲to select M1 to M4.
3. Press and ▼/▲to select ADD or EDIT and VOICE TAG.
4. Press then enter number.
5. Press then enter name.
6. Press to save.
You have the option to enter a voice name in choose VOICE TAG and
RECORD at the point 3.
If you receive a call with the number registered with a voice tag, you can
hear the voice name on the base and on the handset.
NOTES:
●To use a picture big button memory in idle mode, press the picture on
the base.
●If you want to pass the call from the speakerphone to the handset, lift
the handset off the base to take the call.
●If the handset is not placed on the base, press to take the line in
speakerphone mode and place the handset on the base.
Your telephone base includes a telephone answering machine that records
unanswered calls when it is on. The answering machine can store up to
59 messages within the maximum recording time of approximately 15
minutes. As well as recording incoming messages, you can record memos
for other users of your phone.
Switching Answering Machine On/Off
On Base:
Press ANS ON/OFF to switch the answering machine ON or OFF.
On handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to select TAM ON/OFF.
3. Press and ▼/▲to select ON or OFF.
4. Press to confirm.
Play Messages on TAM
If you have new messages, the display will show e.g.2 NEW MESSAGES,
which means you have 2 new messages. The new messages are played
first, and then are saved as old messages, until they are deleted. Old
messages are played again after all new messages are played completely.
On Base: Press /PLAY/STOP to start the playback.
On handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to show PLAYBACK.
3. Press to start message playback and the screen displays the
date and hour of the message received.
4. During message playback, press ▼/▲to adjust the message playback
volume respectively.
NOTES: After new message is played, the new message will be
saved as an old message automatically unless it is deleted.
5. Press and ▼/▲to select STOP, FORWARD, PREVIOUS or
DELETE to perform the following functions during message playback.
●STOP: Stop the current message playback and return to the ANS.
MACHINE menu.
●SLOW ON: to reduce the speed of the playback.
●FORWARD: Skip to play the next message.
The date and hour information of the next message will display if
there is next message.
●PREVIOUS: Skip to repeat playing the current message from the
beginning. The date and hour information of the current message
will display.
●DELETE: Delete the current message and the next message will be
played.
6. Press to confirm the setting.
SettheAnswerDelay
You can set the number of rings before the answering machine answers
and starts playing your OGM. You can set the answering machine to
answer after two to ten rings or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until the first
new message has been registered then the answering machine switches
to answering after approximately 2 signals. This is useful when using
remote access; if you call up the answering machine and there is no reply
after four rings it means there are no messages recorded and you can
hang up before you are charged for the call.
On handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to show SET TAM.
3. Press and ▼/▲to select ANSWER DELAY.
4. Press and ▼/▲to choose: 2 RINGS, 4 RINGS, 6 RINGS, 8
RINGS, 10 RINGS or TOLL SAVE.
5. Press to confirm the setting.
REMOTEOPERATIONS
If you are away from your home, you can call your answering machine to
switch on or off the answering machine and listen to your messages
remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts playing
OGM, press .
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.
KEY FUNCTION
While message is not playing While message is playing
2 Delete the current message
pla
y
back
4 Repeat playing the current
message from the beginning.
Press twice to skip backward to
the previous message
5 Stop the current message playbac
k
6 Skip forward to play the next
message
7 Turn on the answering machine
9 Turn off the answering machine
Enter the 4-digit remote access
PIN
NOTES:
●When your answering machine memory is full, the answer mode will
change to ANSWER ONLY automatically.
●It will change to ANS & RECORD mode automatically after some
messages have been deleted.
●You cannot delete new messages until they have been listened to.
FUNCTION MESSAGE ALERT
When you have a new message, you can hear a beep every 10 seconds.
If you want deactivate this beep, follow the procedure.
Using the handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to show SET TAM.
3. Press and ▼/▲to select MSG ALERT.
4. Press and ▼/▲to select OFF.
5. Press to confirm.
You have the choice to enter 10 Alarms.
On handset:
1. Press , and ▼/▲to select REMINDER.
2. Press , and ▼/▲to select your alarm.
3. Press and ▼/▲to select ON/OFF.
4. Press and select ON.
5. Press and enter the time.
6. Press and choose the frequency.
7. Press to confirm.
You have the choose to activate or deactivate the function Talking Digits.
Activate: this function announces the digit dial or the CID number when
you receive a call and that you have subscribed to the service.
On Base:
1. Press MENU/OK, and ▼/▲to select TLK DIGITS.
2. Press MENU/OK, and ▼/▲to select ON to OFF.
3. Press MENU/OK to confirm.
On handset:
1. Press , and ▼/▲to select TLK DIGITS.
2. Press , and ▼/▲to select ON to OFF.
3. Press to confirm.
Sometimes, our phone rings one time to inform that we have any voice
message on the line. To remove this ringer, you must activate the function.
On the base In idle mode :
1. Press MENU/OK, and ▼/▲to select BS SETTING.
2. Press MENU/OK and ▼/▲to select FIRST RING.
3. Press MENU/OK and select ON.
4. Press to save.
Clean the surface of the housing with a soft, fluff-free cloth. Do not use
any cleaning agents or solvents.
From the moment your Geemarc product is purchased, Geemarc
guarantee it for the period of two years. During this time, all repairs or
replacements (at our discretion) are free of charge. Should you
experience a problem then contact our help line or visit our website at
www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages to
any parts. The product must not be tampered with or taken apart by
anyone who is not an authorized Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND
MUST BE RETAINED AND PRODUCED IN THE EVENT OF A
WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
CE Directives
Geemarc Telecom SA hereby declares that this product is in compliance
with the essential requirements and other relevant provisions of the Radio
and Telecommunications Terminal Equipment Directive RED 2014/53/UE.
The CE declaration of conformity may be consulted at www.geemarc.com
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has been put in
place for the products at the end of their useful life are recycled in the
best way.
When this product is finished with, please do not put it in your domestic
waste bin. Please use one of the following disposal options:
- Remove the batteries and deposit them in an appropriate WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one, they
should accept it.
Thus if you respect these instructions you ensure human health and
environmental protection.
Basic Information
Valid Ran
g
e: Indoor : 50m I Outdoor:300m
Handset
Operatin
g
Time:
Standby time : 100 hours
Talk time : 10 hours approx
RF Paramete
r
Fre
q
uenc
y
: 1.88 GHz to 1.9GHz
Nb Channels: 10
Power Supply
Base: In
p
ut:100-240V 50/60Hz; Out
p
ut: 6V, 800mA ada
p
te
r
Char
g
er: In
p
ut:100-240V 50/60Hz; Out
p
ut: 6V, 450mA ada
p
te
r
Handset: 3 batteries, AAA 1.2V/600mAh rechar
g
eable
For product support and help visit our website at ww.geemarc.com
United Kingdom: 5B Swallow Court, Swallowfields, Welwyn Garden
City, Hertfordshire, AL7 1SB,UK
telephone [phone]
or fax [phone]


UGAMPLIDECTCOMBI 595_En_A3+_V1.3
Technical specifications
DECLARATIONS
GUARANTEE
MAINTENANCE
Function First rin
g
Talkin
g
function
Alarm function
A
nswerin
g
machine
Picture bi
g
button memories
SOS emer
g
enc
y
call
Set Speed Dial Ke
y
Phonebook


678910
On Handset:
1. Press MENU/OK, and ▼/▲to select INTERCOM. Press
MENU/OK.
2. Choose the desired handset number, Base or ALL and press
MENU/OK.
After connection quit the call on handset by pressing .
ConferenceCall
On Handset or Base: Make procedure in chapter external call and choose
the desired handset number with the key
▼/▲.
After connection press and hold until CONFERENCE is shown.
NOTE: Any party that hangs up during a conference call will leave the
other party still connected with the external call.
Your phone can store up to 50 private phonebooks with names and
numbers. Each phonebook entry can have a maximum of 20 digits for
the phone number and 10 characters for the name.
Phonebook entries are stored alphabetically by name and are identical in
the base and handset.
To add new entry
In idle mode:
On Base:
1. Press MENU/OK, and ▼/▲to select PHONEBOOK and press
twice MENU/OK to access the phonebook list (or empty).
2. Press MENU/OK and select ADD.
3. Press MENU/OK then enter phone number.
4. Press MENU/OK and enter the name.
5. Press MENU/OK to save.
On handset:
1. Press , and ▼/▲to select PHONEBOOK and press
twice to access the phonebook list (or empty).
2. Press and select ADD.
3. Press then enter phone number.
4. Press and enter the name.
5. Press to save.
OnHandset
1. Press MENU/OK and ▲/▼to select PHONEBOOK.
2. Press MENU/OK and ▲/▼to select SPEED DIAL.
3. Press MENU/OK, use. ▲/▼to select the speed dial key.
4. Press MENU/OK, select ADD or EDIT.
5. Press MENU/OK then enter the phone number.
6. Press MENU/OK then enter the NAME.
7. Press MENU/OK to confirm.
To use one speed dial key, press and hold in idle mode the key between
1 to 9 for 3 seconds (you hear a beep of confirmation). It is the same
speed dial keys for the base and for the handsets cordless.
SOSsettings
You need to set the SOS numbers before you can make SOS emergency
calls.
On Base:
1. Press MENU/OK, and ▼/▲to select SET SOS.
2. Press MENU/OK, and ▼/▲to select SOS NUMBER.
3. Press MENU/OK and ▼/▲to select the SOS number to edit
(SOS 1, SOS 2, SOS 3 or SOS 4).
4. Press MENU/OK and select ADD to enter a new number or EDIT
to modify the number stored already.
5. Press MENU/OK and enter a phone number or edit the number
stored already.
6. Press MENU/OK and enter a new name or edit the name stored
already.
7. Press MENU/OK to confirm or to delete.
On handset:
1. Press , and ▼/▲to select SET SOS.
2. Press , and ▼/▲to select SOS NUMBER.
3. Press and ▼/▲to select the SOS number to edit (SOS 1,
SOS 2, SOS 3 or SOS 4).
4. Press and select ADD to enter a new number or EDIT to
modify the number stored already.
5. Press and enter a phone number or edit the number stored
already.
6. Press and enter a new name or edit the name stored already.
7. Press to confirm or to delete.
Make SOS emergency calls
On Base
Press and hold 2seconds on the base to launch the
emergency calling sequence from the SOS 1 number to SOS 4 number. A
call will be first dialed to the SOS 1 number. If the SOS 1 number does
not answer in 60 seconds, the call be will made to the SOS 2 number,
and so on. See note.
On handset
Press and hold 3seconds on the handset to launch the emergency
calling sequence from the SOS 1 number to SOS 4 number. A call will be
first dialed to the SOS 1 number. If the SOS 1 number does not answer in
60 seconds, the call be will made to the SOS 2 number, and so on. See note.
NOTE:
●The other party receiving the SOS message must press any number on
their phone to open the SOS call. Thereafter by pressing any number
on their phone every two minutes will keep the emergency call open
else the phone stops the call 10 seconds after.
●To stop the procedure launch by error, press and hold the SOS key
until the alarm SOS stop.
Record SOS messages
You can record your customized SOS message to be played when you
dial out an SOS emergency call otherwise the default message will be
played.
On Base
1. Press MENU/OK, and ▼/▲to select SET SOS.
2. Press MENU/OK, and ▼/▲to select SOS MSG.
3. Press MENU/OK and ▼/▲to select RECORD.
4. Press MENU/OK to start SOS message recording and
“RECORDING ANNC...” will be displayed.
5. Press MENU/OK to save your SOS message.
On handset:
1. Press , and ▼/▲to select SET SOS.
2. Press , and ▼/▲to select SOS MSG.
3. Press and ▼/▲to select RECORD.
4. Press to start SOS message recording and “RECORDING” will
be displayed.
5. Press to save your SOS message.
Play SOS messages
On Base
1. Press MENU/OK, and ▼/▲to select SET SOS.
2. Press MENU/OK, and ▼/▲to select SOS MSG.
3. Press MENU/OK and ▼/▲to select PLAY.
4. Press MENU/OK to to start SOS message playback.
5. Press /PLAY/STOP to stop SOS message playback.
On handset:
1. Press , and ▼/▲to select SET SOS.
2. Press , and ▼/▲to select SOS MSG.
3. Press and ▼/▲to select PLAY.
4. Press to start SOS message playback.
5. Press or 5key to stop SOS message playback.
You have the choice to store 3 picture memories and one direct memory
on the base.
On Base:
1. Press MENU/OK, and ▼/▲to select PHOTO MEM.
2. Press MENU/OK, and ▼/▲to select M1 to M4.
3. Press MENU/OK and ▼/▲to select ADD or EDIT and VOICE
TAG.
4. Press MENU/OK then enter number.
5. Press MENU/OK then enter name.
6. Press MENU/OK to save.
On handset:
1. Press , and ▼/▲to select PHOTO MEM.
2. Press , and ▼/▲to select M1 to M4.
3. Press and ▼/▲to select ADD or EDIT and VOICE TAG.
4. Press then enter number.
5. Press then enter name.
6. Press to save.
You have the option to enter a voice name in choose VOICE TAG and
RECORD at the point 3.
If you receive a call with the number registered with a voice tag, you can
hear the voice name on the base and on the handset.
NOTES:
●To use a picture big button memory in idle mode, press the picture on
the base.
●If you want to pass the call from the speakerphone to the handset, lift
the handset off the base to take the call.
●If the handset is not placed on the base, press to take the line in
speakerphone mode and place the handset on the base.
Your telephone base includes a telephone answering machine that records
unanswered calls when it is on. The answering machine can store up to
59 messages within the maximum recording time of approximately 15
minutes. As well as recording incoming messages, you can record memos
for other users of your phone.
Switching Answering Machine On/Off
On Base:
Press ANS ON/OFF to switch the answering machine ON or OFF.
On handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to select TAM ON/OFF.
3. Press and ▼/▲to select ON or OFF.
4. Press to confirm.
Play Messages on TAM
If you have new messages, the display will show e.g.2 NEW MESSAGES,
which means you have 2 new messages. The new messages are played
first, and then are saved as old messages, until they are deleted. Old
messages are played again after all new messages are played completely.
On Base: Press /PLAY/STOP to start the playback.
On handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to show PLAYBACK.
3. Press to start message playback and the screen displays the
date and hour of the message received.
4. During message playback, press ▼/▲to adjust the message playback
volume respectively.
NOTES: After new message is played, the new message will be
saved as an old message automatically unless it is deleted.
5. Press and ▼/▲to select STOP, FORWARD, PREVIOUS or
DELETE to perform the following functions during message playback.
●STOP: Stop the current message playback and return to the ANS.
MACHINE menu.
●SLOW ON: to reduce the speed of the playback.
●FORWARD: Skip to play the next message.
The date and hour information of the next message will display if
there is next message.
●PREVIOUS: Skip to repeat playing the current message from the
beginning. The date and hour information of the current message
will display.
●DELETE: Delete the current message and the next message will be
played.
6. Press to confirm the setting.
SettheAnswerDelay
You can set the number of rings before the answering machine answers
and starts playing your OGM. You can set the answering machine to
answer after two to ten rings or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until the first
new message has been registered then the answering machine switches
to answering after approximately 2 signals. This is useful when using
remote access; if you call up the answering machine and there is no reply
after four rings it means there are no messages recorded and you can
hang up before you are charged for the call.
On handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to show SET TAM.
3. Press and ▼/▲to select ANSWER DELAY.
4. Press and ▼/▲to choose: 2 RINGS, 4 RINGS, 6 RINGS, 8
RINGS, 10 RINGS or TOLL SAVE.
5. Press to confirm the setting.
REMOTEOPERATIONS
If you are away from your home, you can call your answering machine to
switch on or off the answering machine and listen to your messages
remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts playing
OGM, press .
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.
KEY FUNCTION
While message is not playing While message is playing
2 Delete the current message
pla
y
back
4 Repeat playing the current
message from the beginning.
Press twice to skip backward to
the previous message
5 Stop the current message playbac
k
6 Skip forward to play the next
message
7 Turn on the answering machine
9 Turn off the answering machine
Enter the 4-digit remote access
PIN
NOTES:
●When your answering machine memory is full, the answer mode will
change to ANSWER ONLY automatically.
●It will change to ANS & RECORD mode automatically after some
messages have been deleted.
●You cannot delete new messages until they have been listened to.
FUNCTION MESSAGE ALERT
When you have a new message, you can hear a beep every 10 seconds.
If you want deactivate this beep, follow the procedure.
Using the handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to show SET TAM.
3. Press and ▼/▲to select MSG ALERT.
4. Press and ▼/▲to select OFF.
5. Press to confirm.
You have the choice to enter 10 Alarms.
On handset:
1. Press , and ▼/▲to select REMINDER.
2. Press , and ▼/▲to select your alarm.
3. Press and ▼/▲to select ON/OFF.
4. Press and select ON.
5. Press and enter the time.
6. Press and choose the frequency.
7. Press to confirm.
You have the choose to activate or deactivate the function Talking Digits.
Activate: this function announces the digit dial or the CID number when
you receive a call and that you have subscribed to the service.
On Base:
1. Press MENU/OK, and ▼/▲to select TLK DIGITS.
2. Press MENU/OK, and ▼/▲to select ON to OFF.
3. Press MENU/OK to confirm.
On handset:
1. Press , and ▼/▲to select TLK DIGITS.
2. Press , and ▼/▲to select ON to OFF.
3. Press to confirm.
Sometimes, our phone rings one time to inform that we have any voice
message on the line. To remove this ringer, you must activate the function.
On the base In idle mode :
1. Press MENU/OK, and ▼/▲to select BS SETTING.
2. Press MENU/OK and ▼/▲to select FIRST RING.
3. Press MENU/OK and select ON.
4. Press to save.
Clean the surface of the housing with a soft, fluff-free cloth. Do not use
any cleaning agents or solvents.
From the moment your Geemarc product is purchased, Geemarc
guarantee it for the period of two years. During this time, all repairs or
replacements (at our discretion) are free of charge. Should you
experience a problem then contact our help line or visit our website at
www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages to
any parts. The product must not be tampered with or taken apart by
anyone who is not an authorized Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND
MUST BE RETAINED AND PRODUCED IN THE EVENT OF A
WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
CE Directives
Geemarc Telecom SA hereby declares that this product is in compliance
with the essential requirements and other relevant provisions of the Radio
and Telecommunications Terminal Equipment Directive RED 2014/53/UE.
The CE declaration of conformity may be consulted at www.geemarc.com
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has been put in
place for the products at the end of their useful life are recycled in the
best way.
When this product is finished with, please do not put it in your domestic
waste bin. Please use one of the following disposal options:
- Remove the batteries and deposit them in an appropriate WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one, they
should accept it.
Thus if you respect these instructions you ensure human health and
environmental protection.
Basic Information
Valid Ran
g
e: Indoor : 50m I Outdoor:300m
Handset
Operatin
g
Time:
Standby time : 100 hours
Talk time : 10 hours approx
RF Paramete
r
Fre
q
uenc
y
: 1.88 GHz to 1.9GHz
Nb Channels: 10
Power Supply
Base: In
p
ut:100-240V 50/60Hz; Out
p
ut: 6V, 800mA ada
p
te
r
Char
g
er: In
p
ut:100-240V 50/60Hz; Out
p
ut: 6V, 450mA ada
p
te
r
Handset: 3 batteries, AAA 1.2V/600mAh rechar
g
eable
For product support and help visit our website at ww.geemarc.com
United Kingdom: 5B Swallow Court, Swallowfields, Welwyn Garden
City, Hertfordshire, AL7 1SB,UK
telephone [phone]
or fax [phone]


UGAMPLIDECTCOMBI 595_En_A3+_V1.3
Technical specifications
DECLARATIONS
GUARANTEE
MAINTENANCE
Function First rin
g
Talkin
g
function
Alarm function
A
nswerin
g
machine
Picture bi
g
button memories
SOS emer
g
enc
y
call
Set Speed Dial Ke
y
Phonebook


678910
On Handset:
1. Press MENU/OK, and ▼/▲to select INTERCOM. Press
MENU/OK.
2. Choose the desired handset number, Base or ALL and press
MENU/OK.
After connection quit the call on handset by pressing .
ConferenceCall
On Handset or Base: Make procedure in chapter external call and choose
the desired handset number with the key
▼/▲.
After connection press and hold until CONFERENCE is shown.
NOTE: Any party that hangs up during a conference call will leave the
other party still connected with the external call.
Your phone can store up to 50 private phonebooks with names and
numbers. Each phonebook entry can have a maximum of 20 digits for
the phone number and 10 characters for the name.
Phonebook entries are stored alphabetically by name and are identical in
the base and handset.
To add new entry
In idle mode:
On Base:
1. Press MENU/OK, and ▼/▲to select PHONEBOOK and press
twice MENU/OK to access the phonebook list (or empty).
2. Press MENU/OK and select ADD.
3. Press MENU/OK then enter phone number.
4. Press MENU/OK and enter the name.
5. Press MENU/OK to save.
On handset:
1. Press , and ▼/▲to select PHONEBOOK and press
twice to access the phonebook list (or empty).
2. Press and select ADD.
3. Press then enter phone number.
4. Press and enter the name.
5. Press to save.
OnHandset
1. Press MENU/OK and ▲/▼to select PHONEBOOK.
2. Press MENU/OK and ▲/▼to select SPEED DIAL.
3. Press MENU/OK, use. ▲/▼to select the speed dial key.
4. Press MENU/OK, select ADD or EDIT.
5. Press MENU/OK then enter the phone number.
6. Press MENU/OK then enter the NAME.
7. Press MENU/OK to confirm.
To use one speed dial key, press and hold in idle mode the key between
1 to 9 for 3 seconds (you hear a beep of confirmation). It is the same
speed dial keys for the base and for the handsets cordless.
SOSsettings
You need to set the SOS numbers before you can make SOS emergency
calls.
On Base:
1. Press MENU/OK, and ▼/▲to select SET SOS.
2. Press MENU/OK, and ▼/▲to select SOS NUMBER.
3. Press MENU/OK and ▼/▲to select the SOS number to edit
(SOS 1, SOS 2, SOS 3 or SOS 4).
4. Press MENU/OK and select ADD to enter a new number or EDIT
to modify the number stored already.
5. Press MENU/OK and enter a phone number or edit the number
stored already.
6. Press MENU/OK and enter a new name or edit the name stored
already.
7. Press MENU/OK to confirm or to delete.
On handset:
1. Press , and ▼/▲to select SET SOS.
2. Press , and ▼/▲to select SOS NUMBER.
3. Press and ▼/▲to select the SOS number to edit (SOS 1,
SOS 2, SOS 3 or SOS 4).
4. Press and select ADD to enter a new number or EDIT to
modify the number stored already.
5. Press and enter a phone number or edit the number stored
already.
6. Press and enter a new name or edit the name stored already.
7. Press to confirm or to delete.
Make SOS emergency calls
On Base
Press and hold 2seconds on the base to launch the
emergency calling sequence from the SOS 1 number to SOS 4 number. A
call will be first dialed to the SOS 1 number. If the SOS 1 number does
not answer in 60 seconds, the call be will made to the SOS 2 number,
and so on. See note.
On handset
Press and hold 3seconds on the handset to launch the emergency
calling sequence from the SOS 1 number to SOS 4 number. A call will be
first dialed to the SOS 1 number. If the SOS 1 number does not answer in
60 seconds, the call be will made to the SOS 2 number, and so on. See note.
NOTE:
●The other party receiving the SOS message must press any number on
their phone to open the SOS call. Thereafter by pressing any number
on their phone every two minutes will keep the emergency call open
else the phone stops the call 10 seconds after.
●To stop the procedure launch by error, press and hold the SOS key
until the alarm SOS stop.
Record SOS messages
You can record your customized SOS message to be played when you
dial out an SOS emergency call otherwise the default message will be
played.
On Base
1. Press MENU/OK, and ▼/▲to select SET SOS.
2. Press MENU/OK, and ▼/▲to select SOS MSG.
3. Press MENU/OK and ▼/▲to select RECORD.
4. Press MENU/OK to start SOS message recording and
“RECORDING ANNC...” will be displayed.
5. Press MENU/OK to save your SOS message.
On handset:
1. Press , and ▼/▲to select SET SOS.
2. Press , and ▼/▲to select SOS MSG.
3. Press and ▼/▲to select RECORD.
4. Press to start SOS message recording and “RECORDING” will
be displayed.
5. Press to save your SOS message.
Play SOS messages
On Base
1. Press MENU/OK, and ▼/▲to select SET SOS.
2. Press MENU/OK, and ▼/▲to select SOS MSG.
3. Press MENU/OK and ▼/▲to select PLAY.
4. Press MENU/OK to to start SOS message playback.
5. Press /PLAY/STOP to stop SOS message playback.
On handset:
1. Press , and ▼/▲to select SET SOS.
2. Press , and ▼/▲to select SOS MSG.
3. Press and ▼/▲to select PLAY.
4. Press to start SOS message playback.
5. Press or 5key to stop SOS message playback.
You have the choice to store 3 picture memories and one direct memory
on the base.
On Base:
1. Press MENU/OK, and ▼/▲to select PHOTO MEM.
2. Press MENU/OK, and ▼/▲to select M1 to M4.
3. Press MENU/OK and ▼/▲to select ADD or EDIT and VOICE
TAG.
4. Press MENU/OK then enter number.
5. Press MENU/OK then enter name.
6. Press MENU/OK to save.
On handset:
1. Press , and ▼/▲to select PHOTO MEM.
2. Press , and ▼/▲to select M1 to M4.
3. Press and ▼/▲to select ADD or EDIT and VOICE TAG.
4. Press then enter number.
5. Press then enter name.
6. Press to save.
You have the option to enter a voice name in choose VOICE TAG and
RECORD at the point 3.
If you receive a call with the number registered with a voice tag, you can
hear the voice name on the base and on the handset.
NOTES:
●To use a picture big button memory in idle mode, press the picture on
the base.
●If you want to pass the call from the speakerphone to the handset, lift
the handset off the base to take the call.
●If the handset is not placed on the base, press to take the line in
speakerphone mode and place the handset on the base.
Your telephone base includes a telephone answering machine that records
unanswered calls when it is on. The answering machine can store up to
59 messages within the maximum recording time of approximately 15
minutes. As well as recording incoming messages, you can record memos
for other users of your phone.
Switching Answering Machine On/Off
On Base:
Press ANS ON/OFF to switch the answering machine ON or OFF.
On handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to select TAM ON/OFF.
3. Press and ▼/▲to select ON or OFF.
4. Press to confirm.
Play Messages on TAM
If you have new messages, the display will show e.g.2 NEW MESSAGES,
which means you have 2 new messages. The new messages are played
first, and then are saved as old messages, until they are deleted. Old
messages are played again after all new messages are played completely.
On Base: Press /PLAY/STOP to start the playback.
On handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to show PLAYBACK.
3. Press to start message playback and the screen displays the
date and hour of the message received.
4. During message playback, press ▼/▲to adjust the message playback
volume respectively.
NOTES: After new message is played, the new message will be
saved as an old message automatically unless it is deleted.
5. Press and ▼/▲to select STOP, FORWARD, PREVIOUS or
DELETE to perform the following functions during message playback.
●STOP: Stop the current message playback and return to the ANS.
MACHINE menu.
●SLOW ON: to reduce the speed of the playback.
●FORWARD: Skip to play the next message.
The date and hour information of the next message will display if
there is next message.
●PREVIOUS: Skip to repeat playing the current message from the
beginning. The date and hour information of the current message
will display.
●DELETE: Delete the current message and the next message will be
played.
6. Press to confirm the setting.
SettheAnswerDelay
You can set the number of rings before the answering machine answers
and starts playing your OGM. You can set the answering machine to
answer after two to ten rings or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until the first
new message has been registered then the answering machine switches
to answering after approximately 2 signals. This is useful when using
remote access; if you call up the answering machine and there is no reply
after four rings it means there are no messages recorded and you can
hang up before you are charged for the call.
On handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to show SET TAM.
3. Press and ▼/▲to select ANSWER DELAY.
4. Press and ▼/▲to choose: 2 RINGS, 4 RINGS, 6 RINGS, 8
RINGS, 10 RINGS or TOLL SAVE.
5. Press to confirm the setting.
REMOTEOPERATIONS
If you are away from your home, you can call your answering machine to
switch on or off the answering machine and listen to your messages
remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts playing
OGM, press .
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.
KEY FUNCTION
While message is not playing While message is playing
2 Delete the current message
pla
y
back
4 Repeat playing the current
message from the beginning.
Press twice to skip backward to
the previous message
5 Stop the current message playbac
k
6 Skip forward to play the next
message
7 Turn on the answering machine
9 Turn off the answering machine
Enter the 4-digit remote access
PIN
NOTES:
●When your answering machine memory is full, the answer mode will
change to ANSWER ONLY automatically.
●It will change to ANS & RECORD mode automatically after some
messages have been deleted.
●You cannot delete new messages until they have been listened to.
FUNCTION MESSAGE ALERT
When you have a new message, you can hear a beep every 10 seconds.
If you want deactivate this beep, follow the procedure.
Using the handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to show SET TAM.
3. Press and ▼/▲to select MSG ALERT.
4. Press and ▼/▲to select OFF.
5. Press to confirm.
You have the choice to enter 10 Alarms.
On handset:
1. Press , and ▼/▲to select REMINDER.
2. Press , and ▼/▲to select your alarm.
3. Press and ▼/▲to select ON/OFF.
4. Press and select ON.
5. Press and enter the time.
6. Press and choose the frequency.
7. Press to confirm.
You have the choose to activate or deactivate the function Talking Digits.
Activate: this function announces the digit dial or the CID number when
you receive a call and that you have subscribed to the service.
On Base:
1. Press MENU/OK, and ▼/▲to select TLK DIGITS.
2. Press MENU/OK, and ▼/▲to select ON to OFF.
3. Press MENU/OK to confirm.
On handset:
1. Press , and ▼/▲to select TLK DIGITS.
2. Press , and ▼/▲to select ON to OFF.
3. Press to confirm.
Sometimes, our phone rings one time to inform that we have any voice
message on the line. To remove this ringer, you must activate the function.
On the base In idle mode :
1. Press MENU/OK, and ▼/▲to select BS SETTING.
2. Press MENU/OK and ▼/▲to select FIRST RING.
3. Press MENU/OK and select ON.
4. Press to save.
Clean the surface of the housing with a soft, fluff-free cloth. Do not use
any cleaning agents or solvents.
From the moment your Geemarc product is purchased, Geemarc
guarantee it for the period of two years. During this time, all repairs or
replacements (at our discretion) are free of charge. Should you
experience a problem then contact our help line or visit our website at
www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages to
any parts. The product must not be tampered with or taken apart by
anyone who is not an authorized Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND
MUST BE RETAINED AND PRODUCED IN THE EVENT OF A
WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
CE Directives
Geemarc Telecom SA hereby declares that this product is in compliance
with the essential requirements and other relevant provisions of the Radio
and Telecommunications Terminal Equipment Directive RED 2014/53/UE.
The CE declaration of conformity may be consulted at www.geemarc.com
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has been put in
place for the products at the end of their useful life are recycled in the
best way.
When this product is finished with, please do not put it in your domestic
waste bin. Please use one of the following disposal options:
- Remove the batteries and deposit them in an appropriate WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one, they
should accept it.
Thus if you respect these instructions you ensure human health and
environmental protection.
Basic Information
Valid Ran
g
e: Indoor : 50m I Outdoor:300m
Handset
Operatin
g
Time:
Standby time : 100 hours
Talk time : 10 hours approx
RF Paramete
r
Fre
q
uenc
y
: 1.88 GHz to 1.9GHz
Nb Channels: 10
Power Supply
Base: In
p
ut:100-240V 50/60Hz; Out
p
ut: 6V, 800mA ada
p
te
r
Char
g
er: In
p
ut:100-240V 50/60Hz; Out
p
ut: 6V, 450mA ada
p
te
r
Handset: 3 batteries, AAA 1.2V/600mAh rechar
g
eable
For product support and help visit our website at ww.geemarc.com
United Kingdom: 5B Swallow Court, Swallowfields, Welwyn Garden
City, Hertfordshire, AL7 1SB,UK
telephone [phone]
or fax [phone]


UGAMPLIDECTCOMBI 595_En_A3+_V1.3
Technical specifications
DECLARATIONS
GUARANTEE
MAINTENANCE
Function First rin
g
Talkin
g
function
Alarm function
A
nswerin
g
machine
Picture bi
g
button memories
SOS emer
g
enc
y
call
Set Speed Dial Ke
y
Phonebook


678910
On Handset:
1. Press MENU/OK, and ▼/▲to select INTERCOM. Press
MENU/OK.
2. Choose the desired handset number, Base or ALL and press
MENU/OK.
After connection quit the call on handset by pressing .
ConferenceCall
On Handset or Base: Make procedure in chapter external call and choose
the desired handset number with the key
▼/▲.
After connection press and hold until CONFERENCE is shown.
NOTE: Any party that hangs up during a conference call will leave the
other party still connected with the external call.
Your phone can store up to 50 private phonebooks with names and
numbers. Each phonebook entry can have a maximum of 20 digits for
the phone number and 10 characters for the name.
Phonebook entries are stored alphabetically by name and are identical in
the base and handset.
To add new entry
In idle mode:
On Base:
1. Press MENU/OK, and ▼/▲to select PHONEBOOK and press
twice MENU/OK to access the phonebook list (or empty).
2. Press MENU/OK and select ADD.
3. Press MENU/OK then enter phone number.
4. Press MENU/OK and enter the name.
5. Press MENU/OK to save.
On handset:
1. Press , and ▼/▲to select PHONEBOOK and press
twice to access the phonebook list (or empty).
2. Press and select ADD.
3. Press then enter phone number.
4. Press and enter the name.
5. Press to save.
OnHandset
1. Press MENU/OK and ▲/▼to select PHONEBOOK.
2. Press MENU/OK and ▲/▼to select SPEED DIAL.
3. Press MENU/OK, use. ▲/▼to select the speed dial key.
4. Press MENU/OK, select ADD or EDIT.
5. Press MENU/OK then enter the phone number.
6. Press MENU/OK then enter the NAME.
7. Press MENU/OK to confirm.
To use one speed dial key, press and hold in idle mode the key between
1 to 9 for 3 seconds (you hear a beep of confirmation). It is the same
speed dial keys for the base and for the handsets cordless.
SOSsettings
You need to set the SOS numbers before you can make SOS emergency
calls.
On Base:
1. Press MENU/OK, and ▼/▲to select SET SOS.
2. Press MENU/OK, and ▼/▲to select SOS NUMBER.
3. Press MENU/OK and ▼/▲to select the SOS number to edit
(SOS 1, SOS 2, SOS 3 or SOS 4).
4. Press MENU/OK and select ADD to enter a new number or EDIT
to modify the number stored already.
5. Press MENU/OK and enter a phone number or edit the number
stored already.
6. Press MENU/OK and enter a new name or edit the name stored
already.
7. Press MENU/OK to confirm or to delete.
On handset:
1. Press , and ▼/▲to select SET SOS.
2. Press , and ▼/▲to select SOS NUMBER.
3. Press and ▼/▲to select the SOS number to edit (SOS 1,
SOS 2, SOS 3 or SOS 4).
4. Press and select ADD to enter a new number or EDIT to
modify the number stored already.
5. Press and enter a phone number or edit the number stored
already.
6. Press and enter a new name or edit the name stored already.
7. Press to confirm or to delete.
Make SOS emergency calls
On Base
Press and hold 2seconds on the base to launch the
emergency calling sequence from the SOS 1 number to SOS 4 number. A
call will be first dialed to the SOS 1 number. If the SOS 1 number does
not answer in 60 seconds, the call be will made to the SOS 2 number,
and so on. See note.
On handset
Press and hold 3seconds on the handset to launch the emergency
calling sequence from the SOS 1 number to SOS 4 number. A call will be
first dialed to the SOS 1 number. If the SOS 1 number does not answer in
60 seconds, the call be will made to the SOS 2 number, and so on. See note.
NOTE:
●The other party receiving the SOS message must press any number on
their phone to open the SOS call. Thereafter by pressing any number
on their phone every two minutes will keep the emergency call open
else the phone stops the call 10 seconds after.
●To stop the procedure launch by error, press and hold the SOS key
until the alarm SOS stop.
Record SOS messages
You can record your customized SOS message to be played when you
dial out an SOS emergency call otherwise the default message will be
played.
On Base
1. Press MENU/OK, and ▼/▲to select SET SOS.
2. Press MENU/OK, and ▼/▲to select SOS MSG.
3. Press MENU/OK and ▼/▲to select RECORD.
4. Press MENU/OK to start SOS message recording and
“RECORDING ANNC...” will be displayed.
5. Press MENU/OK to save your SOS message.
On handset:
1. Press , and ▼/▲to select SET SOS.
2. Press , and ▼/▲to select SOS MSG.
3. Press and ▼/▲to select RECORD.
4. Press to start SOS message recording and “RECORDING” will
be displayed.
5. Press to save your SOS message.
Play SOS messages
On Base
1. Press MENU/OK, and ▼/▲to select SET SOS.
2. Press MENU/OK, and ▼/▲to select SOS MSG.
3. Press MENU/OK and ▼/▲to select PLAY.
4. Press MENU/OK to to start SOS message playback.
5. Press /PLAY/STOP to stop SOS message playback.
On handset:
1. Press , and ▼/▲to select SET SOS.
2. Press , and ▼/▲to select SOS MSG.
3. Press and ▼/▲to select PLAY.
4. Press to start SOS message playback.
5. Press or 5key to stop SOS message playback.
You have the choice to store 3 picture memories and one direct memory
on the base.
On Base:
1. Press MENU/OK, and ▼/▲to select PHOTO MEM.
2. Press MENU/OK, and ▼/▲to select M1 to M4.
3. Press MENU/OK and ▼/▲to select ADD or EDIT and VOICE
TAG.
4. Press MENU/OK then enter number.
5. Press MENU/OK then enter name.
6. Press MENU/OK to save.
On handset:
1. Press , and ▼/▲to select PHOTO MEM.
2. Press , and ▼/▲to select M1 to M4.
3. Press and ▼/▲to select ADD or EDIT and VOICE TAG.
4. Press then enter number.
5. Press then enter name.
6. Press to save.
You have the option to enter a voice name in choose VOICE TAG and
RECORD at the point 3.
If you receive a call with the number registered with a voice tag, you can
hear the voice name on the base and on the handset.
NOTES:
●To use a picture big button memory in idle mode, press the picture on
the base.
●If you want to pass the call from the speakerphone to the handset, lift
the handset off the base to take the call.
●If the handset is not placed on the base, press to take the line in
speakerphone mode and place the handset on the base.
Your telephone base includes a telephone answering machine that records
unanswered calls when it is on. The answering machine can store up to
59 messages within the maximum recording time of approximately 15
minutes. As well as recording incoming messages, you can record memos
for other users of your phone.
Switching Answering Machine On/Off
On Base:
Press ANS ON/OFF to switch the answering machine ON or OFF.
On handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to select TAM ON/OFF.
3. Press and ▼/▲to select ON or OFF.
4. Press to confirm.
Play Messages on TAM
If you have new messages, the display will show e.g.2 NEW MESSAGES,
which means you have 2 new messages. The new messages are played
first, and then are saved as old messages, until they are deleted. Old
messages are played again after all new messages are played completely.
On Base: Press /PLAY/STOP to start the playback.
On handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to show PLAYBACK.
3. Press to start message playback and the screen displays the
date and hour of the message received.
4. During message playback, press ▼/▲to adjust the message playback
volume respectively.
NOTES: After new message is played, the new message will be
saved as an old message automatically unless it is deleted.
5. Press and ▼/▲to select STOP, FORWARD, PREVIOUS or
DELETE to perform the following functions during message playback.
●STOP: Stop the current message playback and return to the ANS.
MACHINE menu.
●SLOW ON: to reduce the speed of the playback.
●FORWARD: Skip to play the next message.
The date and hour information of the next message will display if
there is next message.
●PREVIOUS: Skip to repeat playing the current message from the
beginning. The date and hour information of the current message
will display.
●DELETE: Delete the current message and the next message will be
played.
6. Press to confirm the setting.
SettheAnswerDelay
You can set the number of rings before the answering machine answers
and starts playing your OGM. You can set the answering machine to
answer after two to ten rings or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until the first
new message has been registered then the answering machine switches
to answering after approximately 2 signals. This is useful when using
remote access; if you call up the answering machine and there is no reply
after four rings it means there are no messages recorded and you can
hang up before you are charged for the call.
On handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to show SET TAM.
3. Press and ▼/▲to select ANSWER DELAY.
4. Press and ▼/▲to choose: 2 RINGS, 4 RINGS, 6 RINGS, 8
RINGS, 10 RINGS or TOLL SAVE.
5. Press to confirm the setting.
REMOTEOPERATIONS
If you are away from your home, you can call your answering machine to
switch on or off the answering machine and listen to your messages
remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts playing
OGM, press .
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.
KEY FUNCTION
While message is not playing While message is playing
2 Delete the current message
pla
y
back
4 Repeat playing the current
message from the beginning.
Press twice to skip backward to
the previous message
5 Stop the current message playbac
k
6 Skip forward to play the next
message
7 Turn on the answering machine
9 Turn off the answering machine
Enter the 4-digit remote access
PIN
NOTES:
●When your answering machine memory is full, the answer mode will
change to ANSWER ONLY automatically.
●It will change to ANS & RECORD mode automatically after some
messages have been deleted.
●You cannot delete new messages until they have been listened to.
FUNCTION MESSAGE ALERT
When you have a new message, you can hear a beep every 10 seconds.
If you want deactivate this beep, follow the procedure.
Using the handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to show SET TAM.
3. Press and ▼/▲to select MSG ALERT.
4. Press and ▼/▲to select OFF.
5. Press to confirm.
You have the choice to enter 10 Alarms.
On handset:
1. Press , and ▼/▲to select REMINDER.
2. Press , and ▼/▲to select your alarm.
3. Press and ▼/▲to select ON/OFF.
4. Press and select ON.
5. Press and enter the time.
6. Press and choose the frequency.
7. Press to confirm.
You have the choose to activate or deactivate the function Talking Digits.
Activate: this function announces the digit dial or the CID number when
you receive a call and that you have subscribed to the service.
On Base:
1. Press MENU/OK, and ▼/▲to select TLK DIGITS.
2. Press MENU/OK, and ▼/▲to select ON to OFF.
3. Press MENU/OK to confirm.
On handset:
1. Press , and ▼/▲to select TLK DIGITS.
2. Press , and ▼/▲to select ON to OFF.
3. Press to confirm.
Sometimes, our phone rings one time to inform that we have any voice
message on the line. To remove this ringer, you must activate the function.
On the base In idle mode :
1. Press MENU/OK, and ▼/▲to select BS SETTING.
2. Press MENU/OK and ▼/▲to select FIRST RING.
3. Press MENU/OK and select ON.
4. Press to save.
Clean the surface of the housing with a soft, fluff-free cloth. Do not use
any cleaning agents or solvents.
From the moment your Geemarc product is purchased, Geemarc
guarantee it for the period of two years. During this time, all repairs or
replacements (at our discretion) are free of charge. Should you
experience a problem then contact our help line or visit our website at
www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages to
any parts. The product must not be tampered with or taken apart by
anyone who is not an authorized Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND
MUST BE RETAINED AND PRODUCED IN THE EVENT OF A
WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
CE Directives
Geemarc Telecom SA hereby declares that this product is in compliance
with the essential requirements and other relevant provisions of the Radio
and Telecommunications Terminal Equipment Directive RED 2014/53/UE.
The CE declaration of conformity may be consulted at www.geemarc.com
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has been put in
place for the products at the end of their useful life are recycled in the
best way.
When this product is finished with, please do not put it in your domestic
waste bin. Please use one of the following disposal options:
- Remove the batteries and deposit them in an appropriate WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one, they
should accept it.
Thus if you respect these instructions you ensure human health and
environmental protection.
Basic Information
Valid Ran
g
e: Indoor : 50m I Outdoor:300m
Handset
Operatin
g
Time:
Standby time : 100 hours
Talk time : 10 hours approx
RF Paramete
r
Fre
q
uenc
y
: 1.88 GHz to 1.9GHz
Nb Channels: 10
Power Supply
Base: In
p
ut:100-240V 50/60Hz; Out
p
ut: 6V, 800mA ada
p
te
r
Char
g
er: In
p
ut:100-240V 50/60Hz; Out
p
ut: 6V, 450mA ada
p
te
r
Handset: 3 batteries, AAA 1.2V/600mAh rechar
g
eable
For product support and help visit our website at ww.geemarc.com
United Kingdom: 5B Swallow Court, Swallowfields, Welwyn Garden
City, Hertfordshire, AL7 1SB,UK
telephone [phone]
or fax [phone]


UGAMPLIDECTCOMBI 595_En_A3+_V1.3
Technical specifications
DECLARATIONS
GUARANTEE
MAINTENANCE
Function First rin
g
Talkin
g
function
Alarm function
A
nswerin
g
machine
Picture bi
g
button memories
SOS emer
g
enc
y
call
Set Speed Dial Ke
y
Phonebook


678910
On Handset:
1. Press MENU/OK, and ▼/▲to select INTERCOM. Press
MENU/OK.
2. Choose the desired handset number, Base or ALL and press
MENU/OK.
After connection quit the call on handset by pressing .
ConferenceCall
On Handset or Base: Make procedure in chapter external call and choose
the desired handset number with the key
▼/▲.
After connection press and hold until CONFERENCE is shown.
NOTE: Any party that hangs up during a conference call will leave the
other party still connected with the external call.
Your phone can store up to 50 private phonebooks with names and
numbers. Each phonebook entry can have a maximum of 20 digits for
the phone number and 10 characters for the name.
Phonebook entries are stored alphabetically by name and are identical in
the base and handset.
To add new entry
In idle mode:
On Base:
1. Press MENU/OK, and ▼/▲to select PHONEBOOK and press
twice MENU/OK to access the phonebook list (or empty).
2. Press MENU/OK and select ADD.
3. Press MENU/OK then enter phone number.
4. Press MENU/OK and enter the name.
5. Press MENU/OK to save.
On handset:
1. Press , and ▼/▲to select PHONEBOOK and press
twice to access the phonebook list (or empty).
2. Press and select ADD.
3. Press then enter phone number.
4. Press and enter the name.
5. Press to save.
OnHandset
1. Press MENU/OK and ▲/▼to select PHONEBOOK.
2. Press MENU/OK and ▲/▼to select SPEED DIAL.
3. Press MENU/OK, use. ▲/▼to select the speed dial key.
4. Press MENU/OK, select ADD or EDIT.
5. Press MENU/OK then enter the phone number.
6. Press MENU/OK then enter the NAME.
7. Press MENU/OK to confirm.
To use one speed dial key, press and hold in idle mode the key between
1 to 9 for 3 seconds (you hear a beep of confirmation). It is the same
speed dial keys for the base and for the handsets cordless.
SOSsettings
You need to set the SOS numbers before you can make SOS emergency
calls.
On Base:
1. Press MENU/OK, and ▼/▲to select SET SOS.
2. Press MENU/OK, and ▼/▲to select SOS NUMBER.
3. Press MENU/OK and ▼/▲to select the SOS number to edit
(SOS 1, SOS 2, SOS 3 or SOS 4).
4. Press MENU/OK and select ADD to enter a new number or EDIT
to modify the number stored already.
5. Press MENU/OK and enter a phone number or edit the number
stored already.
6. Press MENU/OK and enter a new name or edit the name stored
already.
7. Press MENU/OK to confirm or to delete.
On handset:
1. Press , and ▼/▲to select SET SOS.
2. Press , and ▼/▲to select SOS NUMBER.
3. Press and ▼/▲to select the SOS number to edit (SOS 1,
SOS 2, SOS 3 or SOS 4).
4. Press and select ADD to enter a new number or EDIT to
modify the number stored already.
5. Press and enter a phone number or edit the number stored
already.
6. Press and enter a new name or edit the name stored already.
7. Press to confirm or to delete.
Make SOS emergency calls
On Base
Press and hold 2seconds on the base to launch the
emergency calling sequence from the SOS 1 number to SOS 4 number. A
call will be first dialed to the SOS 1 number. If the SOS 1 number does
not answer in 60 seconds, the call be will made to the SOS 2 number,
and so on. See note.
On handset
Press and hold 3seconds on the handset to launch the emergency
calling sequence from the SOS 1 number to SOS 4 number. A call will be
first dialed to the SOS 1 number. If the SOS 1 number does not answer in
60 seconds, the call be will made to the SOS 2 number, and so on. See note.
NOTE:
●The other party receiving the SOS message must press any number on
their phone to open the SOS call. Thereafter by pressing any number
on their phone every two minutes will keep the emergency call open
else the phone stops the call 10 seconds after.
●To stop the procedure launch by error, press and hold the SOS key
until the alarm SOS stop.
Record SOS messages
You can record your customized SOS message to be played when you
dial out an SOS emergency call otherwise the default message will be
played.
On Base
1. Press MENU/OK, and ▼/▲to select SET SOS.
2. Press MENU/OK, and ▼/▲to select SOS MSG.
3. Press MENU/OK and ▼/▲to select RECORD.
4. Press MENU/OK to start SOS message recording and
“RECORDING ANNC...” will be displayed.
5. Press MENU/OK to save your SOS message.
On handset:
1. Press , and ▼/▲to select SET SOS.
2. Press , and ▼/▲to select SOS MSG.
3. Press and ▼/▲to select RECORD.
4. Press to start SOS message recording and “RECORDING” will
be displayed.
5. Press to save your SOS message.
Play SOS messages
On Base
1. Press MENU/OK, and ▼/▲to select SET SOS.
2. Press MENU/OK, and ▼/▲to select SOS MSG.
3. Press MENU/OK and ▼/▲to select PLAY.
4. Press MENU/OK to to start SOS message playback.
5. Press /PLAY/STOP to stop SOS message playback.
On handset:
1. Press , and ▼/▲to select SET SOS.
2. Press , and ▼/▲to select SOS MSG.
3. Press and ▼/▲to select PLAY.
4. Press to start SOS message playback.
5. Press or 5key to stop SOS message playback.
You have the choice to store 3 picture memories and one direct memory
on the base.
On Base:
1. Press MENU/OK, and ▼/▲to select PHOTO MEM.
2. Press MENU/OK, and ▼/▲to select M1 to M4.
3. Press MENU/OK and ▼/▲to select ADD or EDIT and VOICE
TAG.
4. Press MENU/OK then enter number.
5. Press MENU/OK then enter name.
6. Press MENU/OK to save.
On handset:
1. Press , and ▼/▲to select PHOTO MEM.
2. Press , and ▼/▲to select M1 to M4.
3. Press and ▼/▲to select ADD or EDIT and VOICE TAG.
4. Press then enter number.
5. Press then enter name.
6. Press to save.
You have the option to enter a voice name in choose VOICE TAG and
RECORD at the point 3.
If you receive a call with the number registered with a voice tag, you can
hear the voice name on the base and on the handset.
NOTES:
●To use a picture big button memory in idle mode, press the picture on
the base.
●If you want to pass the call from the speakerphone to the handset, lift
the handset off the base to take the call.
●If the handset is not placed on the base, press to take the line in
speakerphone mode and place the handset on the base.
Your telephone base includes a telephone answering machine that records
unanswered calls when it is on. The answering machine can store up to
59 messages within the maximum recording time of approximately 15
minutes. As well as recording incoming messages, you can record memos
for other users of your phone.
Switching Answering Machine On/Off
On Base:
Press ANS ON/OFF to switch the answering machine ON or OFF.
On handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to select TAM ON/OFF.
3. Press and ▼/▲to select ON or OFF.
4. Press to confirm.
Play Messages on TAM
If you have new messages, the display will show e.g.2 NEW MESSAGES,
which means you have 2 new messages. The new messages are played
first, and then are saved as old messages, until they are deleted. Old
messages are played again after all new messages are played completely.
On Base: Press /PLAY/STOP to start the playback.
On handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to show PLAYBACK.
3. Press to start message playback and the screen displays the
date and hour of the message received.
4. During message playback, press ▼/▲to adjust the message playback
volume respectively.
NOTES: After new message is played, the new message will be
saved as an old message automatically unless it is deleted.
5. Press and ▼/▲to select STOP, FORWARD, PREVIOUS or
DELETE to perform the following functions during message playback.
●STOP: Stop the current message playback and return to the ANS.
MACHINE menu.
●SLOW ON: to reduce the speed of the playback.
●FORWARD: Skip to play the next message.
The date and hour information of the next message will display if
there is next message.
●PREVIOUS: Skip to repeat playing the current message from the
beginning. The date and hour information of the current message
will display.
●DELETE: Delete the current message and the next message will be
played.
6. Press to confirm the setting.
SettheAnswerDelay
You can set the number of rings before the answering machine answers
and starts playing your OGM. You can set the answering machine to
answer after two to ten rings or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until the first
new message has been registered then the answering machine switches
to answering after approximately 2 signals. This is useful when using
remote access; if you call up the answering machine and there is no reply
after four rings it means there are no messages recorded and you can
hang up before you are charged for the call.
On handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to show SET TAM.
3. Press and ▼/▲to select ANSWER DELAY.
4. Press and ▼/▲to choose: 2 RINGS, 4 RINGS, 6 RINGS, 8
RINGS, 10 RINGS or TOLL SAVE.
5. Press to confirm the setting.
REMOTEOPERATIONS
If you are away from your home, you can call your answering machine to
switch on or off the answering machine and listen to your messages
remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts playing
OGM, press .
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.
KEY FUNCTION
While message is not playing While message is playing
2 Delete the current message
pla
y
back
4 Repeat playing the current
message from the beginning.
Press twice to skip backward to
the previous message
5 Stop the current message playbac
k
6 Skip forward to play the next
message
7 Turn on the answering machine
9 Turn off the answering machine
Enter the 4-digit remote access
PIN
NOTES:
●When your answering machine memory is full, the answer mode will
change to ANSWER ONLY automatically.
●It will change to ANS & RECORD mode automatically after some
messages have been deleted.
●You cannot delete new messages until they have been listened to.
FUNCTION MESSAGE ALERT
When you have a new message, you can hear a beep every 10 seconds.
If you want deactivate this beep, follow the procedure.
Using the handset:
1. Press , and ▼/▲to select ANS.SYS.
2. Press , and ▼/▲to show SET TAM.
3. Press and ▼/▲to select MSG ALERT.
4. Press and ▼/▲to select OFF.
5. Press to confirm.
You have the choice to enter 10 Alarms.
On handset:
1. Press , and ▼/▲to select REMINDER.
2. Press , and ▼/▲to select your alarm.
3. Press and ▼/▲to select ON/OFF.
4. Press and select ON.
5. Press and enter the time.
6. Press and choose the frequency.
7. Press to confirm.
You have the choose to activate or deactivate the function Talking Digits.
Activate: this function announces the digit dial or the CID number when
you receive a call and that you have subscribed to the service.
On Base:
1. Press MENU/OK, and ▼/▲to select TLK DIGITS.
2. Press MENU/OK, and ▼/▲to select ON to OFF.
3. Press MENU/OK to confirm.
On handset:
1. Press , and ▼/▲to select TLK DIGITS.
2. Press , and ▼/▲to select ON to OFF.
3. Press to confirm.
Sometimes, our phone rings one time to inform that we have any voice
message on the line. To remove this ringer, you must activate the function.
On the base In idle mode :
1. Press MENU/OK, and ▼/▲to select BS SETTING.
2. Press MENU/OK and ▼/▲to select FIRST RING.
3. Press MENU/OK and select ON.
4. Press to save.
Clean the surface of the housing with a soft, fluff-free cloth. Do not use
any cleaning agents or solvents.
From the moment your Geemarc product is purchased, Geemarc
guarantee it for the period of two years. During this time, all repairs or
replacements (at our discretion) are free of charge. Should you
experience a problem then contact our help line or visit our website at
www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages to
any parts. The product must not be tampered with or taken apart by
anyone who is not an authorized Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND
MUST BE RETAINED AND PRODUCED IN THE EVENT OF A
WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
CE Directives
Geemarc Telecom SA hereby declares that this product is in compliance
with the essential requirements and other relevant provisions of the Radio
and Telecommunications Terminal Equipment Directive RED 2014/53/UE.
The CE declaration of conformity may be consulted at www.geemarc.com
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has been put in
place for the products at the end of their useful life are recycled in the
best way.
When this product is finished with, please do not put it in your domestic
waste bin. Please use one of the following disposal options:
- Remove the batteries and deposit them in an appropriate WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one, they
should accept it.
Thus if you respect these instructions you ensure human health and
environmental protection.
Basic Information
Valid Ran
g
e: Indoor : 50m I Outdoor:300m
Handset
Operatin
g
Time:
Standby time : 100 hours
Talk time : 10 hours approx
RF Paramete
r
Fre
q
uenc
y
: 1.88 GHz to 1.9GHz
Nb Channels: 10
Power Supply
Base: In
p
ut:100-240V 50/60Hz; Out
p
ut: 6V, 800mA ada
p
te
r
Char
g
er: In
p
ut:100-240V 50/60Hz; Out
p
ut: 6V, 450mA ada
p
te
r
Handset: 3 batteries, AAA 1.2V/600mAh rechar
g
eable
For product support and help visit our website at ww.geemarc.com
United Kingdom: 5B Swallow Court, Swallowfields, Welwyn Garden
City, Hertfordshire, AL7 1SB,UK
telephone [phone]
or fax [phone]


UGAMPLIDECTCOMBI 595_En_A3+_V1.3
Technical specifications
DECLARATIONS
GUARANTEE
MAINTENANCE
Function First rin
g
Talkin
g
function
Alarm function
A
nswerin
g
machine
Picture bi
g
button memories
SOS emer
g
enc
y
call
Set Speed Dial Ke
y
Phonebook