Cleveland AWC1 User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity_______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio,U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site:www.ClevelandRange.com
Email: [e-mail]
OPTIONS & ACCESSORIES
Cleveland Standard Features
nAutomatically injects cold water into the steam jacket,
slowing down the cooking process.
nAll exterior surfaces are type 304 Stainless Steel
n115 Volt, 60 Cycle, 1 Phase standard. 220 Volt, 60 cycle,
1Phase optional. Cord and Plug supplied by others.
nAll connections are a 3⁄4˝NPT.
nStandard with six 9⁄32˝holes for wall mounting.
nInternal Components contain:
(1) 3⁄4˝Steam Solenoid Valve,
(3) 3⁄4˝ Water Solenoid Valves,
(1) 3⁄4˝Check Valve,
(1) 220/115V Transformer (220 volt optional)
(1) On/Off Switch.
Options & Accessories
*For Console Mounted Models AWC2:
pRequires Console Mounting Option (CM)
pAvailable only on KDL floor model kettles and MKDL
mixer kettles.
Shall be CLEVELAND, Model AWC ____ Automatic Water
Cooling; 115 Volt, 60 Cycle, 1 Phase; All exterior surfaces are
type 304 Stainless Steel. Internal Components contain:
(1) 3⁄4˝ Steam Solenoid Valve, (3) 3⁄4˝ Water Solenoid Valves, (1)
3⁄4˝ Check Valve, (1) 220/115V Transformer (220 volt optional)
and (1) On/OffSwitch.
Short Form Specifications
SECT. XIII PAGE 3
0707
AUTOMATIC WATER COOLING
AWC1 CABINET & WALL MOUNTED
AWC2 CONSOLE MOUNTED
FOR ALL DIRECT STEAM FLOOR MODEL KETTLES & MIXER KETTLES
Wall or Stand Mounted Models:
cMODEL AWC1
Console Mounted Models:*
cMODEL AWC2

SECT.XIII PAGE 4
0707
Litho in U.S.A.
INSTALLATION DRAWING
NOTE:
•
See EXTERNAL
PLUMBING COM-
PONENTS
(page 5) for utility
connections.
41/4"
6"
17 13/16" 17 13/16"
38 7/8"
6 3/8" 9 3/8" 6 3/8" 9 3/8"
STRAINER
STEAM TRAP
CHECK VALVE
STRAINER STRAINER
FRONT VIEW
HEAT
OFF
COOL
5/8"
TYPICAL
115 v.
(220 v. OPTIONAL)
STATIONARY
KETTLE
TILTING
KETTLE
UNIONS
(SUPPLIED BY
OTHERS)
PRESSURE
REDUCING
VALVE
(SUPPLIED
BY OTHERS)
BALL VALVE
(SUPPLIED
BY OTHERS)
MANUAL STEAM VALVE (NOT INCLUDED)
VALVE# - KE02055-3,
STEAM CONTROL KNOB# - SE00028

SIDE
VIEW
5"
9/32" HOLES (x6)
REAR VIEW
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., NSF, CGA, CSA, ETL and others.