CLF Lighting POSEIDON WASH XS User manual
manual
WWW.CLF-LIGHTING.COM V2.0 MAY 2022
POSEIDON wash xs
table of CONTENTS
WWW.CLF-LIGHTING.COM
Dimensions 1
Safety Instruction 2
Fixture overview 4
Introduction 5
AC Power 5
Power voltage 5
Power cables 6
Relaying power to other devices 6
Data link 6
Tips for reliable data transmission 6
Physical installation 7
Rigging via omega bracket 8
9
Setup 10
Control panel 12
Onboard control menus 14
DMX protocols 16
Specications 24
Dimensions
All dimensions are in millimeters
WWW.CLF-LIGHTING.COM 1
106
106
202
467
300
Safety Instruction
WWW.CLF-LIGHTING.COM 2
WARNING!
Read the safety precautions in this section before installing, powering, operating or servicing this
product
DANGER!
Safety hazard.
Risk of severe
DANGER!
voltage. Risk of
lethal or severe
electric shock.
Fire hazard.
LED light
emission. Risk of
Wear protective
eyewear.
Rea
PROTECTION FROM ELECTRIC SHOCK
•
•
• Use o
• Befo
• Power
• Use ®
®
• sola
completed.
• Refer
• Socket o
WWW.CLF-LIGHTING.COM 3
PROTECTION FROM BURNS AND FIRE
• The
• Keep
• Keep
•
• Do
• Do
•
• Connect
• Do not connect any other type of device to these sockets.
• Do
• Do
PROTECTION FROM INJURY
•
•
•
•
are selected.
•
•
•
•
moves.
•
•
•
WWW.CLF-LIGHTING.COM 4
Fixture overview
LCD Display
AC mains power
WDMX
WWW.CLF-LIGHTING.COM 5
Introduction
POWERFUL AND VERSATILE OUTDOOR
LED WASH
■
■
■
■
■
Using for the rst time
Warning! Read “Safety Information” before installing, powering, operating or servicing the xture. Before
applying power
to the xture:
See
AC Power
Warning!Read“SafetyInformation”startingonbeforeconnectingthexturestoACmainspower.
Warning!Forprotectionfromelectricshock,thexturemustbegrounded(earthed).Thepower
distributioncircuitmustbeequippedwithafuseorcircuitbreakerandground-fault(earth-fault)protection.
Warning!Socketoutletsorexternalpowerswitchesusedtosupplythexturewithpowermustbelocatednear
thextureandeasilyaccessiblesothatthexturescaneasilybedisconnectedfrompower.
Important! Do not insert or remove PowerCON TRUE 1 ® connectors to apply or cut power, as this may cause
arcingattheterminalsthatwilldamagetheconnectors.
Important!Donotuseanexternaldimmingsystemtosupplypowertothexture,asthismaycausedamageto
thexturethatisnotcoveredbytheproductwarranty.
The
Power voltage
Warnin
The
WWW.CLF-LIGHTING.COM 6
Power cables
Data link
Tips for reliable data transmission
Connect
Connect
Relaying power to other devices
• A
• PowerCON
• No
WireColor(EUmodels) WireColor(USmodels) Conductor Symbol
Brown Black Live L
Blue White Neutral N
Yellow/Green Green Ground(earth) or
Table 1: Wire color-coding and power connections
WWW.CLF-LIGHTING.COM 7
Physical installation
Fastening the xture to a at surface
The
attachment fails.
working places and other endangered areas is forbidden.
once a year.
reach of people.
WWW.CLF-LIGHTING.COM 8
Caution:
Rigging via omega bracket:
Safety chain
Clamp
Omega bracket with
Outdoor IP-rated xtures
CLF
Condensation/moisture inside housing
Fixtures temperature specication
Make
Temporary usage:
Stage
technicians over time.
solid object Moisture
12345678
IP
Ingress
Protection
65
Protected against a solid object greater
than 50mm such as a hand.
Protected against a solid object greater
than 12.5mm such as a finger.
Protected against a solid object greater
than 2.5mm such as a screwdriver.
Protected against a solid object greater
than 1mm such as a wire.
Dust protected. Limited ingress of
dust permitted. Will not interfere
with operation of the equipment.
Dust tight. No ingress of dust.
Protected against vertical falling drops of
water. Limited ingress permitted.
Protected against water splashes from
all directions. Limited ingress permitted.
Protected against vertical falling drops
of water with enclosure tilted up to 15
degrees from the vertical. Limited
ingress permitted.
Protected against sprays of water up
to 60 degrees from the vertical.
Limited ingress permitted.
Protected against jets of water.
Limited ingress permitted.
Protected against powerful jets of water.
Limited ingress permitted.
Protected against the effects of
immersion in water between 15cm and
1m for 30 minutes.
Protected against the effects of
immersion in water under pressure for
long periods.
123456
WWW.CLF-LIGHTING.COM 9
WWW.CLF-LIGHTING.COM 10
Setup
Control panel and menu navigation
The
•
•
•
•
•
•
DMX address setting
•
• The
W-DMX control
Transmitters.
Pr
display the sign “
• Holding the MENU and ENTER
•
WWW.CLF-LIGHTING.COM 11
Control mode
Dimmer
Pan
Tilt
P/T speed/time
Macro color
RGBL
CCT
CCT channel tint
Crossfade/dimmer
WWW.CLF-LIGHTING.COM 12
control panel
FANS
Dimmer speed
WDMX Reset Reset the Wireless Board
LED Calibration
Refresh rate
DMX HOLD
Display
Normal
Font selection Select display font
Personality
WWW.CLF-LIGHTING.COM 13
Dimmer mode
O utp ut
O utp ut
O utp ut
Out p ut
DM X %
LI NEA R
DMX %
SQ UAR E LA W
DM X %
INV ER SE S QU ARE LAW
DM X %
S - CUR VE
O utp ut
DM X % UP DMX % Do wn
SP E CIA L
• LINEAR
• SQUARE LAW
• INV Square law
• S-CURVE
• Special
• NORMAL
• The MOOTH 1 / 2 / 3 / 4
one intensity to another.
WWW.CLF-LIGHTING.COM 14
Onboard control menu
NO. Main menu Menu level 2 Menu level 3 Remark
DMX ADDRESS
Set DMX Address
DMX Signal Mode wire / wireless
CONTROL MODE
3 Motor
Pan invert
Tilt invert
Pan/Tilt Swap
FANS
Dimmer Speed
WDMX Reset Reset the Wireless ?
Calibration
LED Calibration Factory / Normal
P/T Motor calibration
Refresh Rate
DMX hold
Display
Rotate
BL blinking when no DMX
On /
Normal / Wide Normal
Key Lock
Font selection Helvetica / Arial / Univers / Calibri / Big_noodle_titling / Gill
Helvetica
WWW.CLF-LIGHTING.COM 15
5
CCT
Dimmer
Red
Green
Lime
Strobe
Pan
Tilt
AUTO COLOR
Speed
Pan
Tilt
Test Test led / Test pan / Test tilt / Test zoom / Test all
8
Software
version
Usage time
L
Fan
Show all received DMX data
Error
information
No errors detected
Clear error message?
9 Reset
Factory reset
WWW.CLF-LIGHTING.COM 16
DMX protocols
20 CH 27 CH 54 CH Function Value Setting Remark
Dimmer
3 3
3 Pan
5 5 Fine control of pan movement
5 6 6 Tilt
6 Fine control of tilt movement
8 8 P/T speed/time
899
WWW.CLF-LIGHTING.COM 17
20 CH 27 CH 54 CH Function Value Setting Remark
9
settings
seconds to activate.
Fan mode REGULATED
Fan mode FULL
Pan/tilt motor reset
Color macro olor macro chart
Red
Green
Lime
Red 3
Green 3
Lime 3
33
35
WWW.CLF-LIGHTING.COM 18
20 CH 27 CH 54 CH Function Value Setting Remark
36 Red 5
Green 5
38
39 Lime 5
Red 6
Green 6
Lime 6
CCT
CCT channel tint
53 Crossfade/dimmer
acro chart
55
Arrangement of the LED groups 1-7
1
2
3
45
6
7
Table of contents
Other CLF Lighting Lighting Equipment manuals
