Click TF-A02 User manual
AFTER SALES SUPPORT
E209
81cm Tower Fan with Timer
INSTRUCTION MANUAL
MODEL: TF-A02
2AFTER SALES SUPPORT
Contents
Important Safety Instructions 3
Product Overview 5
Getting Started 6
Instructions 8
Other Useful Information 9
3
AFTER SALES SUPPORT
Important Safety Instructions
Read this manual thoroughly before first use, even if you are familiar with this type of
product. The safety precautions enclosed herein reduce the risk of fire, electric shock
and injury when correctly adhered to. Make sure you understand all instructions
and warnings. Keep the manual in a safe place for future reference, along with any
warranty information, your purchase receipt and the original carton.
Always follow basic safety precautions and accident prevention measures when using
an electrical appliance, including the following:
• Make sure your outlet voltage and
circuit frequency correspond to the
voltage stated on the appliance rating
label.
• To protect against fire and electric
shock, do not immerse the cord,
plug or fan in water or other liquid,
or expose the electrical connections
to water. Ensure your hands are dry
before handling the plug or switching
on the fan. Do not use the fan
outdoors or on wet surfaces. Protect
it from liquid spills.
• Check the power cord regularly
for visible damage. If the cord is
damaged, it must be replaced by the
manufacturer, its authorised service
centres or appropriately qualified
personnel in order to avoid any
hazards.
• WARNING! Do not pick up or operate
the fan if the supply cord, plug
or housing is damaged, or after it
malfunctions or has been dropped or
damaged in any manner. If damaged,
contact our after sales support centre
for advice.
• Protect the power cord:
-Do not operate the fan with the cord
coiled up; always fully unwind.
-Do not twist or kink the cord or let it
touch heated surfaces.
-Do not put any stress on the cord
where it connects to the product.
-Never carry the fan by the cord.
-Arrange the cord away from any
traffic area so no one will trip over it.
-Do not run the cord under carpeting
or cover it with rugs or runners.
• WARNING! No extension cord, no
timer: Do not use this fan with an
extension cord, plug adaptor, external
timer or separate speed control
device.
• To insert the plug, grasp it firmly and
guide it into outlet.
• Do not use the main power switch
and the On/Off switch as the sole
means for disconnecting power.
Always unplug the fan from the
power outlet when it is not in use and
before cleaning, servicing, moving or
storing the appliance. Grip the plug
and remove it from the outlet, do not
pull the cord when disconnecting at
the mains.
• Unless your home is already fitted
with a residual current device (safety
switch), we recommend installing an
RCD with a rated residual operating
current not exceeding 30mA to
provide additional safety protection
when using electrical appliances.
See your electrician for professional
advice.
• The use of accessory attachments not
recommended in this manual may
cause injury or hazards.
4AFTER SALES SUPPORT
Important Safety Instructions (Cont.)
• This appliance is intended for indoor
household use only. It is not suitable
for commercial, industrial or outdoor
use. Do not use it for anything other
than its intended purpose, and only
use it as described in this manual.
Any other use may cause fire, electric
shock or injury.
• Do not use this fan to dry clothes.
• We accept no liability for any
damages or personal injury caused by
misuse of the product and/or failure
to follow these instructions.
• This fan is not intended for use by
persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
• This fan is not a toy. Supervise
children to ensure they do not play
with it. Close supervision is necessary
when any appliance is used by or near
children.
• WARNING! Do not leave unattended
during use. Switch it off and unplug
it when not in use, if left unattended
and before cleaning and storing.
• Do not move the fan while it is in use.
Do not shake it.
• Position the assembled fan on a
dry, flat, stable surface, keeping a
sufficient distance around the fan and
any objects that could get damaged
or caught in the rotating fan blades.
Do not place it on a desk as this could
affect the stability of the product.
• Do not cover the fan or place
anything on top of fan.
• Do not operate the fan until fully
assembled.
• WARNING! DO NOT use the fan in the
following areas:
- near an open flame, a hot burner,
oven or other source of high heat
- on a soft surface (such as carpet) or
where it may tip over during use
- outdoors or in areas of high
humidity without suitable
ventilation (such as in a bathroom,
laundry area or near a pool)
- near curtains or in tight corners, to
enjoy maximum airflow
- in areas where paint, petrol, etc.
is stored and there is a risk of
explosion or fire from flammable
gases, or in areas where substances
are being sprayed.
• CAUTION! Avoid contact with moving
parts. Never insert fingers, pencils or
any other objects through the grilles/
housing when the fan is running.
Keep hair and loose clothing well
away from the fan when it is in use.
• Ensure nothing is blocking the air out-
let and intake. Do not insert objects
into any opening as this may cause
electric shock and/or a fire hazard.
• Always wait until the fan has stopped
completely and unplug it from the
power supply before cleaning the
fan. 、Wipe the fan with a damp cloth
and allow to dry thoroughly. 、Do not
clean it with abrasive chemicals or
materials such as scourers, as they
may damage the fan. 、Do not spray it
with insecticide or chemical solvents.
• WARNING! If a strong odour is emit-
ted from the fan, turn it off and un-
plug it from the mains power supply.
5
AFTER SALES SUPPORT
Product Overview
Scope of delivery
1 Control panel (see page 8)
2 Air intake grille (at the back)
3 Stand base (to be assembled)
4 Air outlet grille
Tower fan (assembled)
NOTE: Due to continued product improvement, images and illustrations in this manual
may vary slightly from the product purchased. All images in this manual are for reference
purposes only. Parts are not necessarily pictured to scale.
5 Integrated carry handle
(at the back, not visible here)
6 Oscillation button
(at the back, not visible here)
7 Timer control dial
8 Fan speed buttons
1
2
7
3
Control panel
6
4
5
8
Also supplied, but not shown:
4 screws for stand assembly
Instruction manual
Warranty certificate
6AFTER SALES SUPPORT
Unpacking
• This product has been packaged
to protect it against transportation
damage. Unpack the appliance and
keep the original packaging carton
and materials in a safe place. It will
help prevent any damage if the
product needs to be transported in
the future, and you can use it to store
the appliance when it is not in use.
• Watch out for the four small screws,
which you will need for assembling
the base.
• Plastic wrapping can be a suffocation
hazard for babies and young children,
so ensure all packaging materials are
out of their reach and disposed of
safely. In the event that the carton is
to be disposed of, please recycle it
where possible.
Getting Started
• Unwind the cord to its full length.
Inspect the power supply cord
and plug, and all other parts of the
appliance, for visual damage. Do not
use the appliance if anything appears
to be damaged or not working
properly. In case of damage, contact
our after sales support centre using
the details at the bottom of the page.
• Make sure you have read and under-
stood all instructions and warnings
in this manual. Refer to the Product
Overview, page 5, to familiarise your-
self with the product and identify all
parts. Pay particular attention to the
safety instructions on the previous
pages.
7
AFTER SALES SUPPORT
Getting Started (Cont.)
Fig. 1
Fig. 2
Assembly
The stand of this tower fan must be
attached to the fan base before use.
Please follow the assembly instructions
below. Ensure all parts are properly
assembled before using the appliance.
• STEP 1: Place the product flat on
the floor or desktop、. On the base
of the tower fan remove the base
locking collar by unscrewing it in an
anticlockwise direction (Fig. 1).
• STEP 2: Take the two base shells and
run the mains plug and power supply
cord of the tower fan through the
openings in each (Fig. 2).
• STEP 3: Fit together the two base
shells to form the base and then insert
the four base screws, tightening them
in a clockwise direction to secure.
• STEP 4: Attach the base onto the
bottom end of the tower fan so
that the locking tabs align with the
corresponding slots. Twist the base
locking collar in a clockwise direction
to secure it into position. Insert the
power cord into the cable slot.
• After installation, place the tower fan
in vertical position for operation.
WARNING!
Never use the fan until it is properly assembled and affixed securely on the stand.
The fan must only be operated standing upright.
8AFTER SALES SUPPORT
Instructions
Using the tower fan
This tower fan is equipped with three
wind speeds, an oscillation function, a
2-hour timer and an easy to use control
panel on top of the unit.
• STEP 1: Before connecting to the
power supply, please check whether
the voltage displayed on the product
is consistent with your power supply
voltage. Then plug in the power
supply.
• STEP 2: To turn on the tower fan,
select the desired cooling speed by
pressing the fan speed buttons. Speed
setting [ 1 ] gives you the lowest wind
speed, setting [ 3 ] the strongest.
• STEP 3: To use the tower fan for a set
period of time, turn the timer control
dial in a clockwise direction to select
the desired time.
Once set, the timer control will run
its course but can be interrupted and
stopped by turning the timer control
dial in an anticlockwise direction to
the [ OFF ] position.
• STEP 4: Activate the swing function
by pressing the oscillation (OSC)
switch at the back of the unit to the
ON [ I ] position. The fan will now
oscillate 60°from one side to the
other. Press the switch to the OFF
[ O ] position to stop the swing.
• STEP 5: Turn off the fan by pressing
the [ 0 ] button and turning the timer
control dial in an anticlockwise
direction to the [ OFF ] position.
Unplug the tower fan when it is not
in use.
Fig. 3
9
AFTER SALES SUPPORT
Other Useful Information
Cleaning and maintenance
• Clean your fan periodically by lightly
running the soft brush nozzle of a
vacuum cleaner over the front and
rear grilles to remove any dust or dirt.
Alternatively, use a soft, dry, lint-free
cloth for dusting.
• Use a slightly damp, soapy cloth to
remove stubborn stains from plastic
parts, but be sure the cloth is not too
wet and use caution around the air
openings. After cleaning, dry the unit
thoroughly with a soft cloth. Ensure
the fan is completely dry before
reuse.
• WARNING: Do not allow the motor
or other electrical components to be
exposed to water.
• WARNING: Do not attempt to
disassemble the housing or take off a
front or rear grille for cleaning.
WARNING!
• Always wait until the fan has stopped completely, then switch off the fan and
unplug it from the wall outlet before cleaning, maintenance or moving the fan.
• Do not immerse the fan in water or other liquid. Do not spray it with liquids.
Do not allow water to drip on or into the fan motor housing.
• Never use petrol, solvents, harsh detergents, or abrasive or alkaline cleaners on
the fan.
Storage
• In the off season, store the clean
and dry fan in a safe, dry location,
protected from dust. We recommend
using the original carton for storage
of the disassembled product.
• To disassemble, follow the stand base
assembly instructions in reverse order.
Alternatively, place a large plastic
bag or piece of material over the top
of the cleaned appliance for dust
protection during storage.
Service/repair
• The appliance requires no
maintenance and contains no user
serviceable parts.
• Do not attempt to take the fan apart,
repair or modify it. Do not open the
enclosure, or operate the fan if its
power cord or plug is damaged, or
when it is working abnormally.
• In case of damage or malfunction,
or if the cord is damaged, have the
unit repaired by qualified personnel
only, or contact our after sales
support centre for advice on repair or
replacement.
10 AFTER SALES SUPPORT
Other Useful Information (Cont.)
CLASS II - DOUBLE INSULATED APPLIANCE
This symbol indicates that the appliance has been designed in such a way
that it does not require a safety connection to electrical earth (ground).
Compliance
This appliance has been fully tested and meets all requirements as set out by
standards AS/NZS 60335.1 and AS/NZS 60335.2.80.
The RCM Mark (Regulatory Compliance Mark) indicates that the product
complies with the relevant guidelines of the ACMA as well as corresponding
government requirements for the safety of electrical devices.
Power 220–240V~
50Hz
45W
Fan speeds 3
Timer 2 hour timer
Dimensions
(approx.)
(H)820 x (L)160 x (W)139
Weight
(approx.)
2kg
Technical specifications Responsible disposal
At the end of its working life, do not
throw this product out with your
household rubbish. Electrical and
electronic items contain materials and
substances which, if handled or disposed
of incorrectly, could be hazardous to
the environment and human health.
An environmentally friendly method of
disposal will ensure that valuable raw
materials can be recycled. Contact your
local authority for your nearest recycling
centre.
11
AFTER SALES SUPPORT
This page has been left blank intentionally.
AFTER SALES SUPPORT
Distributed by Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO BOX 6056 Frenchs Forest, Australia NSW 2086
Customer Helpline:
(AU) 1300 886 649 (NZ) 0800 836 761
Email: [email protected]
For an electronic copy of this manual, please contact our after sales support centre.
IM Version No: V1.0 Issue: April 2020
Warranty returns
Should you for any reason need to return this product for
a warranty claim, make sure to include all accessories with
the product.
Product does not work?
If you encounter problems with this product, or if it fails to
perform to your expectations, make sure to contact our
After Sales Support Centre on (AU) 1300 886 649 or
(NZ) 0800 836 761 for advice.
Table of contents
Other Click Fan manuals
Popular Fan manuals by other brands
Gorenje
Gorenje AIR 360L Instructions For Use and Instalation
Mitsubishi Electric
Mitsubishi Electric EF-20UYS2-UL manual
Hunter
Hunter 53069 Owner's guide and installation manual
ALKOVA
ALKOVA SUR 80 instruction manual
Dometic
Dometic Ultra Breeze 1400 Installation and operating manual
Julabo
Julabo F12-MA operating manual
