Click CLF6-BLK User manual

15cm Desk Fan with Clip
Model Number: CLF6-BLK
USER MANUAL
AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761
E209

AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
2
Contents
Important Safety Instructions 3
Product Overview 5
Getting Started 6
Operating Instructions 7
Other Useful Information 8

AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail] 3
Important Safety Instructions
Read this manual thoroughly before first use, even if you are familiar with this
type of product. The safety precautions enclosed herein reduce the risk of fire,
electric shock and injury when correctly adhered to. Make sure you understand
all instructions and warnings. Keep the manual in a safe place for future
reference, along with the completed warranty card, purchase receipt and carton.
If you sell or transfer ownership of this product, pass on these instructions to the
new owner. Always follow basic safety precautions and accident prevention
measures when using an electrical appliance, including the following:
Electrical safety and cord handling
• Voltage: Make sure your outlet voltage and circuit frequency correspond to the
voltage stated on the appliance rating label.
• Water: To protect against fire and electric shock, do not immerse the cord, plug
or the fan in water or other liquid, or expose the electrical connections to water.
Ensure your hands are dry before handling the plug or switching on the fan. Do
not use the fan outdoors or on wet surfaces. Protect it from liquid spills.
• Damage: Check the power cord regularly for visible damage. If the cord is
damaged, it must be replaced by the manufacturer, its authorised service
centres or appropriately qualified personnel in order to avoid any hazards.
WARNING! Do not pick up or operate the appliance if the power supply cord,
plug or housing is damaged, or after it malfunctions or has been dropped or
damaged in any manner. In case of damage, contact our after sales support
line for advice.
• Protect the power cord:
• Do not operate the fan with the cord coiled up; always fully unwind.
• Do not twist or kink the cord or let it touch heated surfaces or sharp edges.
• Do not allow the cord to hang over the edge of a table or bench.
• Do not put any stress on the cord where it connects to the product.
• Never carry the fan by the cord.
• WARNING! No extension cord, no timer: Do not use this fan with an extension
cord, plug adaptor, external timer or separate remote-control system. In the
event of danger, the plug must be quickly and easily accessible.
• Connection: To insert the plug, grasp it firmly and guide it into outlet.
• Disconnection: Unplug the appliance from the power outlet when it is not in
use and before cleaning, servicing, moving or storing the appliance, and before
removing a front or rear guard (grille). Grasp the plug and remove it from the
outlet, do not pull the cord when disconnecting.
• RCD: Unless your home is already fitted with a residual current device (safety
switch), we recommend installing an RCD with a rated residual operating
current not exceeding 30mA to provide additional safety protection when using
electrical appliances. See your electrician for professional advice.

AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
4
Important Safety Instructions (Cont.)
Usage conditions and restrictions
• Domestic use only: This appliance is intended for indoor household use
only. It is not suitable for commercial, industrial or outdoor use. Do not
use in moving vehicles or boats. Do not use it for anything other than its
intended purpose, and only use it as described in this manual. Any other
use may cause fire, electric shock or injury.
• Not a dryer: Do not use this fan as a dryer.
• Attachments: The use of accessory attachments not recommended in this
manual may cause hazards.
• Usage restriction: This fan is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their
safety.
• Children: This fan is not a toy. Supervise children to ensure they do not play
with the fan. Close supervision is necessary when any appliance is used by
or near children.
• Unattended: Do not leave the fan unattended when in use. Always switch it
off and unplug when not in use, if left unattended and before cleaning and
storing.
• Location: Place the fan on a dry, flat, stable surface when operating .
• Assembly: Do not operate the fan until fully assembled with all parts.
• WARNING! DO NOT use the fan in the following areas:
* Near an open flame, a hot burner, oven or other source of high heat.
* On a soft surface (such as carpet), or where it may tip over during use.
* Outdoors or in areas of high humidity, without suitable ventilation.
* In a bathroom or near water-filled baths, swimming pools or washbasins.
* Near curtains or in tight corners, to enjoy maximum airflow.
* In areas where paint, petrol, etc. is stored and there is a risk of explosion
or fire from flammable gases.
• CAUTION! Avoid contact with moving parts. Never insert fingers, hands,
pencils or any other objects through the grilles when fan is running.
• CAUTION! Risk of fire: Make sure nothing is blocking the airflow outlet
and air intake grilles. Do not use the fan under a blanket or in poorly
ventilated locations.
• Liability: We assume no liability for any damages or personal injury caused
by misuse of the product and/or failure to follow these instructions.

AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail] 5
Product Overview
Parts list
1 Speed control
2 Motor housing
3 Fan handle
4 Rear guard (grille)
5 Motor shaft
6 Plastic blade
7 Front guard (grille)
8 Tilt adjustment knob
9 Rotary pillar
10 Rotary joint
11 Clip
12 Plastic base

AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
6
Getting Started
Before first use
• This product has been packaged to protect it against transportation
damage. Unpack the appliance and keep the original packaging carton
and materials in a safe place. It will help prevent any damage if the
product needs to be transported in the future, and you can use it to store
the appliance when it is not in use. In the event that the carton is to be
disposed of, please recycle all packaging materials where possible.
• Make sure all packaging materials and stickers are removed before first
use. Plastic wrapping can be a suocation hazard for babies and young
children, so ensure all packaging materials are out of their reach and
disposed of safely.
• Unwind the cord to its full length and inspect it for damage. Do not use
the appliance if the appliance or its cord have been damaged or are not
working properly. In case of damage, contact our after sales support
line for advice on examination or return of the damaged product.
• Read the manual to familiarise yourself with the parts and operating
principles. Pay particular attention to the safety instructions.
Assembly
This fan can be clipped to the edge of a desk or table, or to the base
provided and then used freestanding on the table or desktop. If the fan
parts are disassembled, proceed as follows:
• First attach the rotary pillar to the base so it is stable. Open the clip and
insert it into the opening on the base, as illustrated (Fig. 1). Close the
clip and ensure the fan sits securely on the base. Attach the fan head
onto the rotary pillar, as illustrated (Fig. 2). Then tighten the tilt angle
adjustment in the desired position.
• Alternatively, open the clip, detach it from the base and clip it securely
to the edge of your table or desktop (Fig. 3).
(Fig. 2)
(Fig. 1) (Fig. 3)

AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail] 7
Operating Instructions
Using the fan
• Clip the fan to the base (Fig. 1) and place it on a firm, flat surface for
desktop operation. Alternatively, clip it to the edge of your desk or table
using the clip (Fig. 3).
• Plug the fan into an appropriate power outlet and switch on power to
the outlet.
• Move the speed control to select the desired speed (Fig. 4):
0.......O
1.......Low
2.......High
• Loosen the tilt angle adjustment knob to tilt the fan vertically (Fig. 5),
then tighten the knob again securely.
• The rotary pillar may be manually adjusted 360 degrees to direct the
airflow horizontally into all directions. (Fig. 6).
(Fig. 5)
(Fig. 4) (Fig. 6)

AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
8
Other Useful Information
CAUTION!
Always switch o and disconnect the appliance from the power supply
before attempting any maintenance or cleaning the fan.
Cleaning and maintenance
• Dusting: Clean your fan periodically by lightly running a vacuum
cleaner nozzle (soft brush) over the front and rear guards to remove
any dust or dirt that may have accumulated inside or on the unit.
Alternatively, clean the front and rear guards with a soft cloth or soft,
thin paper towel.
• Stubborn stains: Use a slightly damp and soapy cloth, but not too wet,
for stubborn stains. Use caution around the motor housing area. Do not
allow the motor or other electrical components to be exposed to water.
• Service/repair: The appliance requires little maintenance and contains
no user-serviceable parts. Do not attempt to take it apart, repair or
modify it. Do not operate the fan if its power cord or plug is damaged,
or when it is working abnormally. In case of damage or malfunction,
or if the cord is damaged, have the unit repaired by trained personnel
only, or contact the after sales support line for advice on repair or
replacement.
• Before calling for service: Check that your wall outlet is working
properly, that the plug is firmly placed in the socket and switched on,
and that all required switches are in the ON position.
• Storage: When you have finished using the fan at the end of the season,
wipe o any dust to maintain it in good working order for the next
season. Store the fan in its original box in a safe, dry location, protected
from dust.
WARNING: Electric shock hazard!
• Before assembly, cleaning, storage or removing the guard(s), ensure
the fan is switched off and disconnected from the power outlet.
• Do not immerse the fan in water or other liquids. Do not allow water
to drip on or into the fan motor housing. Do not spray with liquids.
• Never use petrol, solvents, harsh detergents, or abrasive or alkaline
cleaners on the fan.

AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail] 9
Other Useful Information (Cont.)
Technical specifications
Power 15W, 220-240V~, 50Hz
Power cord 1.5m
Design Desk Fan with Clip (15cm Blades)
Fan speeds 2 (Low - High)
Dimensions (mm) 200 (D) x 210 (W) x 310 (H)
Weight 740g
CLASS II - DOUBLE INSULATED APPLIANCE
This symbol indicates that the appliance has been designed
in such a way that it does not require a safety connection to
electrical earth (ground).
NOTE:
Due to continued product improvement, images and illustrations in this manual
may vary slightly from the product purchased. All images in this manual are for
reference purposes only. Parts are not necessarily pictured to scale.
Responsible disposal
• At the end of its working life, make the appliance unserviceable by
unplugging it from the power outlet and cutting the power cord.
• Do not throw this appliance out with your household rubbish.
Electrical and electronic products contain substances which can have a
detrimental eect on the environment and human health if disposed of
inappropriately. Observe any local regulations regarding the disposal of
electrical consumer goods and dispose of it appropriately for recycling.
Contact your local authorities for advice on recycling facilities in your
area.
The RCM Mark (Regulatory Compliance Mark) indicates that the
product complies with the relevant guidelines of the ACMA as
well as corresponding government requirements for the safety of
electrical devices.
E209

AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
10
This page has been left blank intentionally.

AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail] 11
This page has been left blank intentionally.

AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Distributed by Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO BOX 6056 Frenchs Forest, Australia NSW 2086
Customer Helpline:
(AU) 1300 886 649 (NZ) 0800 836 761
Email: [e-mail]
For an electronic copy of this manual, please contact our after sales support centre.
IM Version No: V3.0 Issue: April 2020
Warranty returns
Should you for any reason need to return this product for
a warranty claim, make sure to include all accessories with
the product.
Product does not work?
If you encounter problems with this product, or if it fails to
perform to your expectations, make sure to contact our
After Sales Support Centre on (AU) 1300 886 649 or
(NZ) 0800 836 761 for advice.