Climate RENTAL SOLUTIONS CA600 User manual

CA600 AIR PURIFIER
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
INSTRUCTION MANUAL

INSTRUCTION MANUAL CA600 AIR PURIFIER SERIES
Page 2
Before using, please read this user manual carefully and keep it for future reference.
DANGER WARNING
1. To avoid electric shock and re, do not allow water, liquid or any ammable detergent to get into or to clean the
product.
2. Do not spray insecticide, perfume or other ammable spray around the products.
SAFETY WARNING
1. Before connecting the power supply, please check whether the voltage of the product is consistent with the local
power supply voltage.
2. When the power cord is damaged, it must be replaced by electrical technicians or professional personnel to
avoid danger.
3. Do not use when the plug, power cord or the product is damaged
4. Do not block the air inlet and air outlet, for example, do not place objects on or in front of the air outlet.
5. Do not insert foreign matter into the product through the air inlet.
6. This product should not be used by persons (including children) with physical disabilities, mental disabilities or
lack of relevant experience and skills, unless they are given instructions by the person responsible for their safe-
ty.Do not allow children to play with the product or to clean and maintain the product unsupervised.
NOTICE
1. This product is not a substitute for normal ventilation, daily vacuuming or cooking range hoods.
2. Make sure the connected power socket is in good contact, or the plug may become very hot.
3. Do not place anything on the product.
4. Ensure the product is used in condition of a stable and horizontal level.
5. Please leave at least 30cm of space on the back and sides of the product, and at least 50cm of space above the
product when using.
6. Do not put the product directly under the air conditioner to prevent condensation from dripping into the product.
7. Before turning on the power supply, make sure that the lter and lter cover are properly installed.
8. Please use the lter specially designed for this product.
9. Burning the lter may cause irreversible human harm or endanger other lives. Do not use the lter for fuel or
similar purposes.
10. Do not hit the product with hard objects (especially the air outlet and air inlet).
11. Do not insert nger or other things into the air outlet/inlet to prevent physical damage or trouble.
12. Do not use this product when using indoor aerosol repellent or in places lled with oil, ammable gas or chemical
fumes.
13. Ensure the device is power-o󰀨 and unplugged before cleaning, maintaining and replacing lter.
14. Please unplug the product before moving it. Do not move the product by pulling the power cord.
POINTS FOR ATTENTION

INSTRUCTION MANUAL CA600 AIR PURIFIER SERIES
Page 3
COMPONENTS
PRODUCT OVERVIEW

INSTRUCTION MANUAL CA600 AIR PURIFIER SERIES
Page 4
CONTROL PANEL
SPECIFICATION
Model CA 600
Dimension 700x310x310mm
Weight 7.9kg
Rated voltage Input Voltage 220-240V — 50/60Hz
Power 60W
Noise 56dB
Coverage area 77m'

INSTRUCTION MANUAL CA600 AIR PURIFIER SERIES
Page 5
Plug the air purier into the power socket, the device will ring a “Di” sound, then the screen and background lights
ash once, indicating that the air purier is energized.
BUTTON INSTRUCTION
Power button
The device will ring once every time you touch the power button. Press the power button to turn on/o󰀨 the device.
After the device is turned on, it works in Auto mode by default, and the background light displays the correspond¬ing
color according to PM2.5 detection value. The display screen displays the status of corresponding function ICONS
and PM2.5 values.
Notice: In the case of without unplugging the power plug, when turned on again, the device will work in the state
before shutdown by default.
If the lter screen is not installed properly or not installed, the device will have alarm sound and display alarm icon
when turned on.
Wind speed Button
In the condition of working, the device will ring once every time you touch the wind speed button.Wind speed can be
adjusted in auto - sleep - mid- high mode.
Timer button
In the condition of working, the device will ring once every time you touch the timing button. The timer can be set to
2H-4H-6H-8H-10H-12H-24H-cancel.
When the timer has been set, long press the timing button can cancel the timing.
 UV/Anion/WiButton
In the condition of working,the device will ring once every time you touch the UV/WiFi/Anion button.Optional function:
Anion function only-UV function only-Anion and UV functions-OFF In the condition of working, long press the UV/
WiFi/Anion button to connect or reset the WiFi.
Notice: When the UV function has been turned on, it will works intermittently every 2 hours.
INSTRUCTION

INSTRUCTION MANUAL CA600 AIR PURIFIER SERIES
Page 6
1. Use your mobile phone to scan the QR code below to download the “Smart Life” APP. You can also search for
“smart life” in the APP store or Google Play to install the APP.
2. Open the “Smart Life” APP and use your phone number or e-mail to register your “Smart Life” account, then
login.
3. Connect the mobile phone to the home wireless network, and turn on the mobile phone Bluetooth (please select
2.4GHz WiFi network).
OPEN THE “SMART LIFE” APP
Enter the homepage of the “Smart Life” APP. Click “+” to select to add a device, the APP will display manual addition
and automatic discovery.
Automatic discovery: When the corresponding authority is turned on, the device can be automatically discovered,
and the device needs to be in the network conguration state and turned on.
Manually add: select the name corresponding to the product, WIFI+Bluetooth mode.
BLUETOOTH CONFIGURATION:
When conrming that the WIFI indicator of the device is ashing quickly, click OK, and then wait for the connection.
(Recommended,) When “Successfully add 1 device” appears, it means the connection has been completed and your
device will be listed in your APP list.
HOTSPOT CONFIGURATION NETWORK:
Click on the WIFI quick connection in the upper right corner to select the hotspot distribution network (AP Mode),Conrm
that the WIFI indicator of the device ashes slowly, click OK, and enter your home WIFI and WIFI password.
Next, click to connect to go to the WLAN setting interface of the phone, and then select the Wi-Fi network “SmartLife_
XXXX” to connect it.
Your device will be listed in your APP list. Now, you can control your smart device through the mobile APP anytime
and anywhere (make sure your mobile phone and smart device are connected to the network, make sure your router
name is changed to SmartLife_XXXX).
WIFI MANUAL

INSTRUCTION MANUAL CA600 AIR PURIFIER SERIES
Page 7
When the screen displays the remaining 0% of the lter’s service life, it indicates that the lter needs to be replaced.
Please use the lter specially designed for this product.
NOTICE:
1. Please wipe the dust on the lter regularly, do not wash or use it repeatedly.
2. Please turn o󰀨 the device and unplug the plug from the power outlet before replacing the lter.
3. Do not vacuum the lter.
4. Please put the lter in direct sunlight regularly to sterilize bacteria.
When the air purier runs for more than 2200 hours, the screen will display an icon indicating the remaining 0% of the
lter’s service life and the indicator will ash in yellow, indicating that the lter should be replaced.
REMOVE THE PACKING OF FILTER
Ensure the device is unplugged then remove the packing of lter before using.
1. Turn o󰀨 the device and unplug it from the socket.
FILTER REPLACING

INSTRUCTION MANUAL CA600 AIR PURIFIER SERIES
Page 8

INSTRUCTION MANUAL CA600 AIR PURIFIER SERIES
Page 9
NOTICE:
••Ensure the device is unplugged before maintenance.
•Do not immerse the air purier into water or any liquid.
•Do not use abrasive, corrosive or ammable cleansers (such as bleach or alcohol) to clean any part of the unit.
•Do not wash the lter.
•Do not use a vacuum cleaner to clean the lter.
CLEAN:
•Ensure the device is power-o󰀨 and unplugged.
•Remove the lter, clean the dust adsorbed on the outer surface of the lter (gently pat the lter outside the
house);
•Use a soft cloth with neutral cleanser to clean away any dust or debris from the surface of the device and air
inlet/outlet.
•After the device completely dry out, put on the bag and place it in a cool and well-ventilated place.
Notice: Make sure there is no any water drop into the device when clean the air outlet.
STORAGE:
•Turn o󰀨 the device and unplug the power supply, arrange and bundle the power cord.
•Remove the lter, clean the dust adsorbed on the outer surface of the lter
•Clean the air inlet/outlet, wipe the body with a neutral detergent and a soft cloth.
•After the device is completely dried, put on a dust cover/bag and place it in a well-ventilated place not exposed
to direct sunlight.
•If you do not use it for a long time, please turn on the device for a few minutes from time to time to ensure a good
performance.
MAINTENANCE

INSTRUCTION MANUAL CA600 AIR PURIFIER SERIES
Page 10
Problem Solution
Not working
•Is it plugged into a power socket? Is there a power outage?
•Is the home leakage switch or fuse cut o󰀨?
•Is the service life of lter runs out?
The air volume becomes smaller •Is there any dust in the surface of original lter?
•Is the air inlet/outlet of the device blocked by something?
Signicant noise
•Is there anything stuck on the fan in the air outlet?
•Is the device tilted?
•If not the situation above, you can adjust the device to a lower
wind speed.
Bad smell
•It is normal that air purifiers may smell plastic the first few
times they are used. If the filters are dirty, the air purifiers will
also give off bad smell. Please clean or replace the filter in
this situation.
•If the burning smell emits from the machine, please unplug
the power socket and contact with seller or customer service.
The reminder of replacing lter keeps ashing after new lter has
been replaced
The lter has been replaced, it may be that you haven’t reset the
lter life indicator. Please press and hold the wind speed button for
7s to remove the yellow light and the indicator will resume from 0
hours.
TROUBLESHOOTING