Climate RENTAL SOLUTIONS MECY 10 User manual
MECY 10
EVAPORATIVE COOLER
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
USER MANUAL
USER MANUAL MECY 10 PORTABLE INVERTER WATER COOLING FAN
Page 2
SPECIFICATION
Model MECY 10 Speed (Max.) 1600 RPM Wind Distance
(Max.) 10m up
External Frame PE Sound Volume (Max.) 55dB Size L67*W48*H100cm
Blades 16" 3 Nylon 6 + Fiber
Blades Voltage (Regular) 1 % 230V, 50Hz Water Storage 48L
Motor 1/3HP F Grade Current (Max.) 2.4A Weight 30kg
Pole 4P Power Consumption
(Max.) 320 w/hr Total Weight with
Water 78kg
(The sound volume data is detected from 3 m near, and will be veried in dierent surrounding area.)
PERFORMANCE AND SPECIFICATION
USER MANUAL MECY 10 PORTABLE INVERTER WATER COOLING FAN
Page 3
1. Operation Process : Open the water inlet to ll up the tank.Turn on the power of pump (see Control Panel Instruc-
tion below), and let the water wet the cooling pad for 1 to 2 minutes , then turn on the power of fan and adjust the
fan speed. By following the process, you will get the best cooling eect of your fan.
2. Please avoid spraying water on the control panel ; it may cause short-circuit.
3. Control Panel Instruction:
APower / Emergency
Stop
• Switch the button and light up the power indicator.
• Press the button to turn o the power when any emergency occur. Please
follow the on and o process below for general usage.
• Attention: Once you press the Emergency Stop, restart the fan after 20
seconds.
BPower of Pump
• Switch on the button, the pump will start as there is sucient water inside
the tank. The pump would not start when the water level is low. Please ll
up the tank before use.
CPower of Fan • Switch on the power of fan and press the fan speed regulator to control the
speed.
DFan Speed Regulator • Control the fan speed as the power of fan is on. From 0-100; the higher the
number, the faster and more output from the fan.
EPower of Electric
Shutters • Control the electric shutters.
INSTRUCTION
USER MANUAL MECY 10 PORTABLE INVERTER WATER COOLING FAN
Page 4
CHANGE THE WATER REGULARLY
• During use, the dust and particles would precipitate inside the tank. This may reduce the cooling capacity of the
fan and brings bad odor. We suggest to change the water in the tank at least once a week; increase frequency
if needed. Do not spray water directly to the inverter or the control panel.
• The cooling fan can lter dust and particles. When using the fan in an area with dusty air, we suggest to open the
manual drain to drain the water after use. Fill the tank next time when needed.
• Manual Drain : At the bottom of the cooling fan. Open the cap and drain the water out. Put the cap back after-
ward.
The water cooling pads are consumables. Please contact us or our distributor for replacement when stained
or torn.
WARNING:
• Please follow the instructions in this manual accurately. Damages and injuries caused by improper use will not
be covered under the warranty.
• We are not responsible for accident caused by unauthorized product modications.
CLEAN AND MAINTAIN
USER MANUAL MECY 10 PORTABLE INVERTER WATER COOLING FAN
Page 5
• When notice any problems which may occur during the delivery or transportation , please contact us or our dis-
tributor in your country for urgent assistance.
• To avoid any accident or damage, please follow the rules below:
• You must learn how to operate the machine correctly before use.
• You must read through the manual and have the knowledge of all the instructions before use.
• You must read through the manual and understand every instruction label before use.
The content of this manual, including the specications and the design of the products may subject to be modied
without prior notice. This manual is protected by copy laws. All rights are reserved by Climate Rental Solutions.
INSTRUCTION
OPERATING INSTRUCTION
1. Please follow the conditions below:
Please connect the fan with AC 110V or 220V , Single Phase power source. (There is a voltage
instruction sticker on the fan.)
The power voltage should not be 10% higher or lower than the indicated voltage.
Suitable Operating Temperature: 0°C-45°C. Do not place the machine near heat or re.
2. When water storage level comes low, the pump would automatically stop. Please ll the tank to the maximum of
the scale and do not over ll.
3. Do not stand, sit, or place things on the fan. It may cause damage, overturning, or injury when things drop.
4. Keep the buckle of the ice cube inlet fastened after use.
5. Do not detach the cover guard and other parts of the fan, or it may cause fan damage or accident.
6. Please provide an independent socket or cable for the fan. Do not share the power source with other high power
consumption equipment to ensure safety.
7. By turning o the pump switch, you can use this product with the fan function only.
8. To ensure the best cooling eect, we suggest to wash the cooling pad and change the tank water once every
week. Open the manual drain cap at the bottom anti then ll up the tank again after the following cleaning pro-
cedures can last the pump’s service life longer.
USER MANUAL MECY 10 PORTABLE INVERTER WATER COOLING FAN
Page 6
A. Attention! Before the cleaning process, please switch o the fan, plug o , and move the fan away from power
source and other equipment.
B. Open the manual drain cap below, the cooling pad with soft brush and wash from the top. After washing, wait
until the waste water drain away, then close the drain cap.
C. When washing the cooling pad, do not spray water directly to the control panel or the cover of the inverter. This
will damage the motor controller.
D. Wipe the fan housing with wet towel, do not spray water or wipe it with volatile liquid.
9. Product damages cause by the following issues are not covered under our warranty.
• Power connection with incorrect voltage.
• Damage during handling or transit caused by users.
• Damage caused by natural calamities.
• Structural damage caused by volatile liquid or gas.
• Accident or damage caused by wire connection or power sharing with other equipment.
• Damage caused by converting or changing of the parts.
• Malfunction caused by wire altering.
• Damage caused by water spray or rain.
• Pump damage caused by clogging due to careless of cleaning.
• Damage caused by uninstructed and incorrect procedures.
Table of contents
Other Climate RENTAL SOLUTIONS Air Cleaner manuals
