John Greenleaf 133AC User manual

3/05
P.O. Box 2827
Eugene, OR 97402 USA
For normal household use only.
recommended for commercial use.
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
Do not climb or stand on this piece of
furniture.
Production Code:
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Service Policy: We will replace any
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours: Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order: Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: [phone] • Email: [e-mail]
Fax: [phone] • Email: [e-mail]
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
133AC
Kingston Barstool
134AC
Captian’s
Swivel Barstool
135AC
Cosmopolitan
Barstool
159AC
Taylor Barstool
Assembly Instructions

PAGE 2 — 133AC, 134AC, 135AC & 159AC
133AC, 134AC, 135AC & 159AC — Parts List
Before beginning assembly, check that the quantities of the parts received match those on the parts list below.
1) Cover the work surface with a cloth or piece of cardboard to protect the seat and arms. Place
the Seat Assembly (A) upside down on the work surface. Be sure that the front of the swivel
(marked on top side of swivel) is placed towards the front of the seat and place the Leg
Assembly (B) upside down on the bottom of the seat and line up the holes in the swivel with
the pilot holes in the seat. Screw the swivel into place through the access holes in the disc
with two #14 x 3/4" Pan Head Screws (C). Turn the leg assembly until the other two sets of
holes line up with the access holes in the disc and finish screwing the swivel down with the
remaining #14 x 3/4" Pan Head Screws (C). See FIGURE 1.
FIG. 1
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED: Phillips Head Screwdriver
IMPORTANT:
Not intended for use by
children without adult
supervision.
133AC Kingston Barstool shown
Quantity
Part Description 133AC 134AC 135AC 159AC
A Seat Assembly . . . . . . . . . . . . . . 1 . . . . . . .1 . . . . . . 1 . . . . . . 1
B Leg Assembly . . . . . . . . . . . . . . . 1 . . . . . . .1 . . . . . . 1 . . . . . . 1
C #14 x 3/4" Pan Head Screws . . . 4 . . . . . . .4 . . . . . . 4 . . . . . . 4
A
B
C x4
FRONT