Club Cannon MICRO JET MKII User manual
TABLE OF CONTENTS
MICRO JET MKII INTRO ...................................................................1
- OVERVIEW ....................................................................................1
- FEATURES .....................................................................................1
INCLUDED ITEMS .............................................................................2
SAFETY GUIDE .................................................................................3
- SAFETY RADIUS...........................................................................4
- SAFE MOUNTING.........................................................................5
HARDWARE OVERVIEW ..................................................................6
- UNIT REAR ....................................................................................6
HARDWARE SPECIFICATIONS .......................................................7
CO2 REQUIREMENTS ......................................................................8
CO2 SETUP .......................................................................................9
QUICK START DMX GUIDE .............................................................10
QUICK START POWER GUIDE ........................................................11
HOME SCREEN .................................................................................12
- DMX ADDRESSING ......................................................................12
PURGE LINES ....................................................................................13
DEVICE TROUBLESHOOTING ........................................................14
INCLUDED WARRANTY ...................................................................15
TERMS & CONDITIONS ...................................................................17
CONTACT US ....................................................................................18
NOTICE
OVERVIEW
FEATURES
Congratulations on your purchase of the Micro Jet MKII. This manual will provide an overview of the Micro
Jet MKII’s functions, capabilities, and instructions for proper operation. If you have questions outside the
scope of this manual, feel free to contact us directly.
The Club Cannon Micro Jet MKII is a compact, power CO₂ jet
that produces 20-30FT plumes of ice cold fog, using liquid
CO2. It is great for DJ’s, Touring acts, performers, nightclubs, DJ
booths, sporting events, field entrances, theatre productions,
weddings, special events and more.
The Micro Jet MKII now includes on board DMX control with
RDM functionality, power trigger mode, and a purge lines
feature.
The Micro Jet MKII requires a Siphon CO₂ tank to operate
properly. Due to the volume of CO₂ expelled, the Micro Jet MKII
is only meant to be used in well ventilated spaces or outdoors.
The Micro Jet MKII has the ability to be opperated in two
separate mode.s DMX mode is recommended as the best
solution for trigger this unit. Alternatively power mode can be
used with the included power mode adapter.
Necessary precautions should be taken when using FX products to ensure the safety of the
operator, crew, and audience.
Do not operate this product, or any special eects product without proper knowledge and
training. Never operate Special Eects Equipment under the influence of drugs or alcohol.
MICRO JET MKII INTRO
• Up to 30’ Output • Ventilated Barrel • Integrated Muer • Quick Connect Input
• Truss Mountable • Purge Lines Feature • LED Display • Load Handle
• DMX Controlled • 1CH Operation • Neutrik True1 Input • Power Only Mode
SINGLE JET
25-30FT PLUME
(DEPENDING ON HUMIDITY)
1
The following items are included with the purchase of each Micro Jet MKII. If you need replacement items,
MICRO JET MKII TRUE1 CABLE
CO₂ ATTACHMENT TOOL POWER MODE ADAPTER5 - CO₂ WASHERS
CO₂ HOSE
Now with DMX Control 6’ Edison to True1 cord
Used to tighten the CGA-320
fitting to your CO₂ tank.
Used to activate momentary
power mode on jet.
Seals the connection between
your CO₂ hose and CO₂ tank.
CGA-320 x Quick Connect
INCLUDED ITEMS
2
WARNING
DANGER
WARNING
CAUTION
NOTICE
SAFETY GUIDE
Carbon dioxide is known as an asphyxiant gas. Carbon dioxide poisoning has been linked
to various health issues, including central nervous system damage, permanent deterioration
of respiratory functions, suocation or even death. If you have any health concerns that may
be related to the Product’s use of carbon dioxide, consult your doctor before using any of the
Products.
• CO₂ Levels can be measured using a CO₂ Monitor.
• 5,000 PPM is the workplace exposure limit in most jurisdictions.
• Check with your local agency to verify any need for permits in your area.
To ensure safe operation, user must follow instructions closely. Necessary protocols should be followed when
handling and operating Special Eects Equipment and their respective consumables.
• Never place objects of any kind inside barrels.
• Never aim or fire the products at any person or living thing.
• This product is meant to be used only in well-ventilated areas.
When using the products, always follow the safety radius displayed in this manual.
Once the product is attached to the CO₂ tanks and the tanks are turned on, the product, hoses and fittings will
be under high pressure. Do not disconnect any fittings or hoses until the tank has been turned o, and the
remaining gas has been cleared through the product, depleting all pressure in the system. If a leak is detected,
cease use of the product immediately. Never stand directly over unit while under pressure. Jets should be
mounted or fixed in a safe place. When using Jets above ground, always use a safety cable in the event the
Product’s mount or fixture should fail. You must supply the safety cable(s) to use with this product. If you are
under 18, you should not be using this product.
Preventing Serious Injury or Death
CO₂ Special Eects are to only to be used in well ventilated areas. Failure to do so may result in oxygen
displacement.
Maintain a safe distance between Special Eects Products and audience, crew & event sta. Refer to the safety
radius outlined in this manual.
Never aim Special Eects Products directly at any person or living thing.
Always fasten tanks to avoid tipping, rocking, or being tampered with. When feasible, keep tanks out of direct
sunlight.
Check with ocials in local jurisdiction for any permit requirements before operating Special Eects.
This icon signifies that severe
bodily harm or death will
occur if instuctions are not
followed.
This icon signifies that severe
bodily harm or death may
occur if instuctions are not
followed.
This icon signifies that mild
to moderate injury may
occur if instuctions are not
followed.
This icon signifies product
malfunction or damage may
occur if instructions are not
followed.
3
10FT 10FT
10FT 10FT
10FT 10FT
10FT 10FT
30FT
10FT 10FT
WARNING
SAFETY GUIDE
Under no circumstance should any person or object be placed inside the displayed safety
radius while system in under pressure.
Direct line of sight is required at all times while operating this product. Special care must be
taken when preformers are near units. Always inform performers, sta and event personel
that may inadvertantly enter the safety radius of this product.
SAFETY RADIUS
The Micro Jet MKII can produce a plume of fog upwards of 30FT/9M. Images below outline the necessary
safety radius, which must be observed at all times.
4
• KEEP A SAFE DISTANCE FROM AUDIENCE
• DO NOT SHOOT DIRECTLY AT PEOPLE
• ONLY USE IN WELL VENTILATED AREAS
• AFFIX BARREL SECURELY WITH WRENCH
• NEVER PLACE OBJECTS IN BARREL
• REGULARLY VERIFY BARREL ASSEMBLY
FITTINGS ARE SECURE
110-120v
220-240v
DMX ADDRESS
• KEEP A SAFE DISTANCE FROM AUDIENCE
• DO NOT SHOOT DIRECTLY AT PEOPLE
• ONLY USE IN WELL VENTILATED AREAS
• AFFIX BARREL SECURELY WITH WRENCH
• NEVER PLACE OBJECTS IN BARREL
• REGULARLY VERIFY BARREL ASSEMBLY
FITTINGS ARE SECURE
110-120v
220-240v
DMX ADDRESS
• KEEP A SAFE DISTANCE FROM AUDIENCE
• DO NOT SHOOT DIRECTLY AT PEOPLE
• ONLY USE IN WELL VENTILATED AREAS
• AFFIX BARREL SECURELY WITH WRENCH
• NEVER PLACE OBJECTS IN BARREL
• REGULARLY VERIFY BARREL ASSEMBLY
FITTINGS ARE SECURE
110-120v
220-240v
DMX ADDRESS
• KEEP A SAFE DISTANCE FROM AUDIENCE
• DO NOT SHOOT DIRECTLY AT PEOPLE
• ONLY USE IN WELL VENTILATED AREAS
• AFFIX BARREL SECURELY WITH WRENCH
• NEVER PLACE OBJECTS IN BARREL
• REGULARLY VERIFY BARREL ASSEMBLY
FITTINGS ARE SECURE
110-120v
220-240v
DMX ADDRESS
CAUTION
CAUTION
GROUND PLACEMENT • Recommended use. Utilize the holes on the base plate to
fasten to a solid surface when necessary.
HORIZONTAL MOUNTING
• Horizontal mounting requires a solid mounting surface.
• If using truss, the structure MUST have adequate ballast to
support the weight & recoil force of product.
• NEVER mount to flown/hung truss.
INVERTED MOUNTING
• Due to the output from this unit, the minimum safety radius
must be followed. Unless this is possible to acheive, inverted
mounting MUST be avoided.
• NEVER mount to flown/hung truss.
TOTUM MOUNTING • Totum mounting can be utilized, provided the user has a secure
fastening method of product to totum structure.
SAFETY GUIDE
SAFE MOUNTING
TOTUM MOUNTING
GROUND PLACEMENT
INVERTED MOUNTING
HORIZONTAL MOUNTING
5
POWER
This product is available in 2 voltages, marked on unit accordingly.
• North America - 110-120v AC with included TRUE1 PowerCon cable.
• Worldwide - 220-240v AC with included TRUE1 PowerCon cable.
DMX NEUTRIK 3 Pin XLR Connectors.
• 1 Channel - Activates output (255 value required for operation).
HARDWARE OVERVIEW
3 CHARACTER
LED DISPLAY
CLUB CANNON
BARREL WITH BUILT
IN SILENCER
DMX ADDRESS
ADJUSTMENTS
VENT HOLES
VENT COVER
SLEEVE
UNIT REAR
TRUE1
POWERCON
INPUT
DMX
INPUT
DMX
OUTPUT
+
POWER
TRIGGER PORT HIGH GRIP
FEET
ADJUSTABLE ANGLE
FITTING
• KEEP A SAFE DISTANCE FROM AUDIENCE
• DO NOT SHOOT DIRECTLY AT PEOPLE
• ONLY USE IN WELL VENTILATED AREAS
• AFFIX BARREL SECURELY WITH WRENCH
• NEVER PLACE OBJECTS IN BARREL
• REGULARLY VERIFY BARREL ASSEMBLY
FITTINGS ARE SECURE
110-120v
220-240v
DMX ADDRESS
6
HARDWARE SPECIFICATIONS
WEIGHT: 6.85 LBs
3.11 KGs
VOLTAGE: US - 110-220v AC 50-60hz
EU - 220-240v AC 50-60hz
DIMENSIONS:
WITHOUT BARREL
8.5” x 5.88” x 6”
215.9 mm x 149.35mm x 152.4mm
CONSUMPTION: 25W MAX
CO₂
CONSUMPTION:
~ 0.83LB / Sec
~ 0.36KG / Sec
9.13
8.72
6.13
5.00
7.50
0.515
9.11
5.88
3.11
2.93
8.50
6.00
7
NOTICE
CO₂ REQUIREMENTS
SIPHON CO₂ TANK REQUIRED.
Liquid CO₂ is the key to creating large plumes of fog. Gaseous
CO₂, which comes from a non-siphon CO₂ tank, will not create the
desired fog eect.
The siphon tube feeds the Club Cannon product liquid from the
bottom of the tank, while a standard CO₂ tank draws gas from the
top of the tank (see illustration).
If your tank is full, but not producing fog, you most likely have
the wrong type of tank. Ask your gas supplier to exchange it for
a siphon model. Once the fog starts to appear thin, your tank is
depleted of liquid. It is now time to get a refill.
HUMIDITY
The eect works best in humid environments. Anytime humidity
levels are 25% or below, the fog will appear noticeably thinner.
Use the weather app on your phone to check your local humidity
level.
TEMPERATURE
To ensure reliable operation of your product, keep tanks out of
direct sunlight. Maximum tank temperature is 80 degrees F. When
the tank temperature is above 80F, the pressure increases and
can aect operation.
Where can I buy CO₂?
CO₂ can be purchased from any local gas or welding supplier.
Click here to find the nearest MATHESON location.
Click here to find the nearest PRAXAIR location.
Click here to find the nearest AIRGAS location.
Failure to use a siphon tank will prevent the product from producing the desired
eect. If the product is firing clear gas and not fog, this is likely the cause.
8
Club Cannon products (the “Product”) are meant to be
used to create special eects. Any use of these Products
shall be in accordance with the Terms and Conditions
presented at the time of sale, and as they appear in this
manual. Any misuse or abuse of this Product can be
extremely dangerous.
DANGER
CO₂ SETUP
1
2
3
4A
4B
Note: After use, close the valve on the CO₂ tank. Clear the remaining gas through the
product, depleting all pressure in the system. Once the product is de-pressurized,
you can safely detach the hose from the tank and product.
1. Attach the female quick connect fitting on the hose, to the male
quick connect fitting on the product. Pull back the sleeve and apply
slight force to mate the connectors.
2. Place the plastic washer inside the fitting that connects to the tank,
then attach the fitting. Tighten with the supplied tool, or any adjustable
wrench (1 1/8”).
3. Position your CO₂ tank in a nearby location. Make sure the tank is
stable, and won’t tip over. Tanks should be secured with ratcheting
straps or chain to ensure they are secure.
4. After attaching and tightening all fittings, turn on your CO₂ tank and
check for any leaks. If a leak is present, cease use immediately and
contact Club Cannon. Trigger the unit each time you want to release
CO₂.
FAILURE TO INSTALL WASHER WILL RESULT IN A LEAK
UNSTABLE TANKS CAN BE EXTREMELY DANGEROUS
THIS STEP MUST OCCUR BEFORE PRESSURIZING SYSTEM
Club Cannon, LLC accepts no responsibility or liability for damages or injuries
caused by misuse or abuse of the Product.
9
ATTACH BARREL
Screw fitting of barrel to CO₂ outlet. Set desired angle of
jet, hand tightening to temporarly hold in place. Use either
a 11/16(17mm) wrench or adjustible wrench to fully tighten
fitting securely.
1.
SET ADDRESSES
To expedite setup time, we have implimented single digit
addressing. Each set of arrows independantly controls the
above digit. While receiving DMX hold button to unlock first.
Note: Only 1 channel triggering is availible on this unit.
3.
ATTACH HOSE
Follow the steps outlined on CO₂ SETUP GUIDE for proper
CO₂ setup.
Read through the entire manual for more in-depth information,
including safety procedures and best practices.
5.
BOOT MICRO JET MKII
The Micro Jet MKII accepts AC power through the TRUE1
connector on the rear of the product. Verify correct supply
voltage prior to use. Incorrect voltage may cause damage to
unit. Rated voltage is marked above the power inlet.
2.
CONNECT DMX
The last step is to attach a DMX controller like “The Button” or
“ShoMaster” to control the Micro Jet MKII.
4.
QUICK START DMX GUIDE
10
ATTACH BARREL
Screw fitting of barrel to CO₂ outlet. Set desired angle of
jet, hand tightening to temporarly hold in place. Use either a
11/16(17mm) wrench or adjustible wrench to fully tighten fitting
securely.
1.
CONNECT RELAY PACK
Using our Power Pack, DMX relay pack, or simply any
controllable power source
3.
ATTACH HOSE
Follow the steps outlined on CO₂ SETUP GUIDE for proper
CO₂ setup.
Read through the entire manual for more in-depth information,
including safety procedures and best practices.
5.
INSERT POWER MODE ADAPTER
The Micro Jet MKII includes a 1/4” TS mono plug that can be
inserted into the 3 pin XLR port output. When inserted, jet will
act as a power controlled jet when powered on until removed.
2.
CONNECT DMX
The last step is to attach a DMX controller like “The Button” or
“ShoMaster” to control the relay pack.
4.
QUICK START POWER GUIDE
11
• KEEP A SAFE DISTANCE FROM AUDIENCE
• DO NOT SHOOT DIRECTLY AT PEOPLE
• ONLY USE IN WELL VENTILATED AREAS
• AFFIX BARREL SECURELY WITH WRENCH
• NEVER PLACE OBJECTS IN BARREL
• REGULARLY VERIFY BARREL ASSEMBLY
FITTINGS ARE SECURE
110-120v
220-240v
DMX ADDRESS
This unit features quick access to setting the DMX address. This is the default screen that is shown when
the Micro Jet MKII is first powered on.
INCREASE DIGIT
DMX STATUS
HOME SCREEN
001.
When the Micro Jet MKII is receiveing
DMX the unit will enter a lockout
state. Either removing DMX or holding
down a button for 5 seconds will allow
readdressing.
While addressing the Micro Jet MKII,
there is a 3 second window before the
address is store. If the unit is receiving
DMX it will re-enter its lockout state.
DMX ADDRESSING
12
WARNING
Ensure no persons or living thing are inside the safety radius when using the Purge Lines
feature. DMX must be disconnected for the Purge Lines feature to be available for use.
Never handle the product by the barrel, as it will become extremely cold after use. Frostbite
can occur if handled improperly. Utilize the load handles for transporting / moving unit.
PURGE LINES
Line purging can be used as a convenience feature at the end of a show. To use this feature, DMX must be
disconnected from the Micro Jet MKII.
Before purging, warn anyone nearby.
Press and hold 2 outer buttons.
There will be a 5 second delay after
activating the purge lines feature. This
allows the user sucient time to step
away from the unit.
Valve will be opened for 10 seconds.
User can disable purge at any time by
pressing any button.
13
Display blank or odd charaters • Reboot via power cycle.
• If issue persists, contact Club Cannon directly.
Unit resetting while triggering • Make sure power supply is properly grounded.
• If no earth ground is present, cease use immediately.
Valves not opening reliably
• Ensure sufficient voltage & amperage is supplied to unit.
• Ensure tanks are not in direct sunlight, causing increased
pressure. Tanks should not exceed 80 degrees F to ensure
reliable operation.
Leak from barrel • Cease use immediately if any leaks are present.
• Contact Club Cannon directly for repair instructions.
Leak from quick connect
• Cease use immediately if any leaks are present.
• Ensure no particles or contaminates are present inside the
female quick connector. Check for any damage to black O-ring.
Leak from tank connection
• Ensure a CO2 washer has been inserted into the brass CGA-
320 fitting prior to connecting to tank. Use included attachment
tool to securely fasten connection.
Fog appears thin
• Ensure CO2 tanks have necessary siphon tube installed.
• Standard CO2 tanks do not produce the desired effect.
• Check relative humidity. Low humidity will have a negative
affect on the fog appearance.
Unit does not power on
• Ensure correct voltage is being supplied to product.
• Supplying incorrect voltage will cause permanent damage.
• If issue persists, contact Club Cannon directly.
No user serviceable parts inside.
If your issue is not listed, or the suggested solution did not solve the issue, contact Club Cannon.
DEVICE TROUBLESHOOTING
ISSUE SOLUTION
14
The Micro Jet MKII includes a 1 year parts & labor warranty against manufacturer defects. Warranty does
not cover damage caused by accident, misuse, abuse, alteration, or unauthorized repair. To make a
warranty claim, contact Club Cannon directly.
INCLUDED WARRANTY
The Micro Jet MKII is an electronic device, sensitive to moisture. To avoid
risk of electronic shock, malfunction, or voided warranty, only use in dry
environments. Do not operate in harsh weather conditions. Do not block or
insert anything into the jet’s barrels.
This product should only be used by trained and qualified persons.
Club Cannon, LLC accepts no liability or responsibility for misuse or abuse of this product,
nor any liability or responsibility of the products being used with the ShoMaster.
NOTICE
15
Page left blank intentionally.
16
TERMS & CONDITIONS
Club Cannon® products (collectively, the “Product” or “Products”) are not toys. Any misuse of the Products could be extremely dangerous. Club Cannon® Products use carbon
dioxide under high pressure to create special eects similar to a fog machine. They are not air cannons and should not be used to shoot projectiles in any fashion. Never place
objects of any kind inside the barrel. Never aim or fire the Products at any person or living thing. Never hit any person or object with any of the Products. The Products are meant
to be used only in well-ventilated areas. When using the Products, make sure you are in an open field or a well-ventilated area and are at least fifteen (15) feet away from people
or other living things. Never hold a Club Cannon® Product by the barrel, especially after it has been used as it becomes extremely cold. Once the Product is attached to the CO₂
tank and the tank is turned on, the gas passing through the Product will be under pressure. Do not disconnect the fitting connecting the hose to the Product until the tank has been
turned o and the remaining gas has been cleared through the product, depleting any pressure in the systems components. Stationary Club Cannon® units (collectively, the “Jets”)
should be mounted or fixed in a safe place. When using the Jets above the ground, always use a safety cable in the event the Product’s mount or fixture should fail for any reason.
You must supply the safety cable(s) to use with the Jets. If you are under 18, you should not be using the Products.
Carbon dioxide is known as an asphyxiant gas. Carbon dioxide poisoning has been linked to various health issues, including central nervous system damage, permanent
deterioration of respiratory functions, suocation or even death. If you have any health concerns that may be related to the Product’s use of carbon dioxide, consult your doctor
before using any of the Products. To the extent you may have problems with your back, consult your doctor before using any of the Products in a portable fashion (such as, for
illustration purposes only, using the Club Cannon® CO₂ Tank Backpack).
You must supply the carbon dioxide tank to use with the Products. Club Cannon, LLC, a California limited liability company (the “Company”), accepts no responsibility for claims,
damages, losses or injuries arising from the tank or any malfunction thereof.
Acknowledging the foregoing, you voluntarily assume all risks associated with the use of the Products with the full knowledge and appreciation of the risks involved.
The Company disclaims any liability for product defect claims that are due to misuse, improper product selection and/or misapplication of the Products. The Company oers a
limited one year, (365) day warranty for each of the Products. If, during the ninety (365) day warranty period (the “Warranty Period”), which shall commence on the original purchase
date, a specific component of the Product fails, the Company will repair or replace it at no cost to you. Notwithstanding the foregoing, the purchaser is responsible for all shipping
charges associated with sending the Product to the Company for repair and for its return to the purchaser. If, however, any component of the Product fails after the expiration of the
Warranty Period, the warranty coverage does not extend to those components or to any damage they may cause. After the expiration of the Warranty Period, the Company shall not
be responsible for the performance of the Products, including any component(s) that were repaired or replaced. This limited warranty shall not apply to failure caused by accident,
alterations, misuse or abuse of the Products. This warranty is not transferrable. At all times, the purchase price of the Products shall be nonrefundable. Notwithstanding the
foregoing, the Company may, in its discretion, accept the return of a new, unused Product in re-saleable condition subject to a twenty-five percent (25%) restocking fee and payment
by the purchaser of all shipping charges associated with the return of the Product to the Company. If the Company determines, in its reasonable discretion, that the returned Product
has been used, no refund shall be issued to the purchaser.
The Products are provided on an “as is” with all faults basis and with no warranty except the express warranty set forth above. To the maximum extent permissible by law, the
Company disclaims all other warranties, including, but not limited to, the implied warranty of merchantability and the implied warranty of fitness for a particular purpose. The use of
the Products is at the sole risk of the user. Under no circumstances shall the Company, its members, managers, ocers, agents, employees, successors or assigns be liable for any
injuries or damages whatsoever to any person or property arising from the use of the Products, which shall include, but not be limited to, consequential, incidental, special, exemplary
or punitive damages. To the maximum extent permissible by law, the Company’s liability in all events is limited to, and shall not exceed, the purchase price paid for any Product that
gives rise to any liability.
Excluding any services provided to you by the Company under a separate written agreement, these Terms and Conditions constitute the entire agreement between you and the
Company regarding the use of the Products and supersede any and all previous and contemporaneous oral and written agreements between you and the Company regarding your
use of the Products.
Club Cannon® and its associated logo are trademarks of the Company. You may not use any of the Company’s trademarks or logos without the Company’s prior written consent.
Unless otherwise noted, all materials, including but not limited to the Company’s Web site(s), all articles, text, graphics, logos, images, illustrations, designs, icons, photographs, video
clips, audio clips, all menu pages, underlying HTML code, and software that is part of the Web site(s), are protected under copyright laws and are the trademarks, trade dress and/or
other intellectual properties owned, controlled or licensed by the Company or are otherwise part of the public domain.
The Company’s Web site(s) (excluding linked sites) is controlled by the Company from its oce within the State of California, U.S.A. By accessing the Web site(s) and/or purchasing
the Products, you and the Company agree that all matters relating to your access to, or use of, the Web site(s) and/or the Products shall be governed by the statutes and laws of the
State of California, without regard to conflicts of laws principles. You and the Company also agree and hereby submit to the exclusive personal jurisdiction and venue of the Superior
Court of San Luis Obispo County and the United States District Court for the Central District of California with respect to such matters. Those who choose to access the Web site(s)
and/or purchase the Products from locations outside California shall be responsible for compliance with local laws, if and to the extent local laws are applicable. Notwithstanding the
foregoing, you agree that the Company shall still be allowed to apply for injunctive relief (or an equivalent type of urgent legal relief) in any jurisdiction.
Except for any claim seeking the exercise of the injunctive or equitable powers of a court of competent jurisdiction, any action to enforce or interpret this Agreement, or to resolve
disputes with respect to this Agreement, shall be settled by arbitration in accordance with California Code of Civil Procedure Sections 1280 through 1294.2 and any successor
provisions thereto. The provisions of California Code of Civil Procedure Section 1283.05 regarding the right to take depositions and obtain discovery shall apply to the arbitration.
Arbitration shall be the exclusive dispute resolution process. Any party may commence arbitration by sending a written demand for arbitration to the other parties. Such demand
shall set forth the nature of the matter to be resolved by arbitration. The place of arbitration shall be in the County of San Luis Obispo, California. The substantive law of the State
of California shall be applied by the arbitrator to the resolution of the dispute. The parties shall share equally all initial costs of arbitration. The prevailing party shall be entitled to
reimbursement of attorneys’ fees, costs, and expenses incurred in connection with the arbitration. All decisions of the arbitrator shall be final, binding, and conclusive on all parties.
Judgment may be entered upon any such decision in accordance with applicable law in any court having jurisdiction thereof. The arbitrator (if permitted under applicable law) or such
court may issue a writ of execution to enforce the arbitrator’s decision.
If, for any reason, a court of competent jurisdiction finds any provision of these Terms and Conditions, or portion thereof, to be unenforceable, that provision shall be enforced to the
maximum extent permissible so as to eect the intent of the Company as reflected by that provision, and the remainder of these Terms and Conditions shall continue in full force and
eect. Any failure by the Company to enforce or exercise any provision of these Terms and Conditions or related rights shall not constitute a waiver of that right or provision.
If any legal proceeding, arbitration or other action is brought or threatened for the enforcement or interpretation of these Terms and Conditions, or because of an alleged dispute,
breach, default or misrepresentation in connection with any of the provisions of these Terms and Conditions, and the prevailing party in any such action(s) should incur any legal fees,
including, but not limited to, attorneys’ fees, paralegal fees, expert witness fees and other similar costs, the successful or prevailing party or parties to any such dispute or action shall
be entitled to recover their reasonable attorneys’ fees and additional legal costs incurred, together with any other relief to which they may otherwise be entitled, as determined by an
arbitrator, judge at trial, or upon appeal or petition.
The Company may make changes to these Terms and Conditions from time to time. When changes are made, the Company will post a new version of the Terms and Conditions on
the Web site(s) and enclose a copy of the then-applicable Terms and Conditions in future purchases of the Products.
Use of the Club Cannon® products is subject to the following Terms and Conditions:
17
CONTACT US
874 Via Esteban STE B, San Luis Obispo, CA 93401
888-804-8175
© CLUB CANNON 2021
CONTACT US
18
Table of contents
Other Club Cannon Industrial Equipment manuals
