CNET CIC-920W Manual

CIC-920W Basic Setup
January 2008

How to
• Access the camera on the network
• Set wireless settings
• Store/record images

Basic Setup
• Connect the power
• Use an Ethernet cable to connect the
camera to your network
• Install the search tool software from the
CD to a computer on the network

• Install Search Tool from CD

• Run the CIC-920W program by going to
start>>programs>>CIC-920W

• Double click the found camera to bring up
the camera interface.

How to setup wireless
• Click on basic settings icon
• Click on Network
• Click on Wireless tab
• Enter the SSID of your wireless router/AP
• Match the Auth/encryption settings used
by your wireless router

wireless

Where to store images
• CIC-920W can be configured to capture
snapshots or record video to any location
on the network
• This can be done in the Video settings
page
• Just enter the location for storing
snapshots and recordings. This location
could be the CNet NAS CLD-221P that
can be accessed from anywhere.
!

Video settings

Viewing captured images
• All captured images are in jpg format
• All recorded files are in .av format
• Play back recorded .av files by going to
the monitor page, browse to the location
holing the files, select the av file and click
on play
• Option to convert .av files to .avi by using
the built-in converter in Camera user
interface

• Monitor page