Coast to Coast 59401 User manual

Item
number
:
-
59401, 59402
2
6
.0
7
.13
Page
1
of
3
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish.
! Proper assembly of this item requires 2 people & would require approx 10 minutes to assemble.
CARE INSTRUCTIONS
Wipe with a soft, dry cloth. To protect finish, avoid the use of chemicals and household cleaners. Any liquid spilled
Onto the table should be cleaned up immediately with a damp cloth.
PARTS
ASSEMBLY INSTRUCTION
Curved Desk, (59401, 59402)
D
Allen Bolt
M8, 50mm, 6x
E
Allen Bolt
M8, 60mm, 2x
F
Washer
25mm 6x
G
Spring Washer
6x
H
Allen Key
M6, 1 x
I
Allen Key
M5, 1 x
B
C
A

Item
number
:
-
59401, 59402
2
6
.0
7
.13
Page
2
of
3
Step 1- Lay the Table top panel (A) upside down on to a clean smooth surface. Take legs assembly (B) and match it with its
respective side.
The slots on the Top and legs are numbered. Match the number on the leg assembly with that on the Top, while
attaching.
Insert Allen Bolt (D) with washer (F) & spring washer (G) & Loosely Tighten with Allen Key (H).
Step 2- Now align the bottom Stretcher (C) with legs (B) as shown. Insert the stretcher tenon in the front leg’s slot.
Step 3- Insert Allen Bolt (E) & in back legs & loosely Tighten with Allen Key (I).
Step 4 - Now fully tighten all Allen Bolts (D) & (E) with Allen Key (H) & (I).
Step 5 - With help flip the Table upright.

Item
number
:
-
59401, 59402
2
6
.0
7
.13
Page
3
of
3
STEP
-
1
STEP
-
2
STEP
-
3
STEP
-
4
STEP
-
4
STEP
-
5