Wholesale Interiors BBT6607 User manual

ASSEMBLY INSTRUCTIONS HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBB BOLT M8 x 16mm 8 PCS
2JCBB BOLT M8 x 35mm 8 PCS
3 JCBB BOLT M8 x 50mm 2 PCS
4 JCBB BOLT M8 x 60mm 2 PCS
5 JCBB BOLT M8 x 70mm 4 PCS
6M8 FLAT WASHER 16 PCS
7M8 SPRING WASHER 16 PCS
8WOOD SCREW M4 x 32mm 9 PCS
9 WOOD DOWEL M10 x 30mm 8 PCS
10 M5 ALLEN KEY (BALL SHAPE) 1 PC
MODEL : BBT6607 FULL BED 1 of 3
STEP 1
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provider).
PART LIST
ITEM DESCRIPTION QTY
AHEADBOARD 1 PC
BHEADBOARD PANEL 1 PC
CFOOTBOARD 1 PC
DSIDE RAIL 2 PCS
ECENTER RAIL 1 PC
FCENTER SUPPORT LEG 3 PCS
GBED SLAT 1 SET
HBED LEG 4 PCS
IHEADBOARD SUPPORT WOOD 2 PCS
STEP 2
B
9
C
9
E
F
10
57
6
I
A
2
7
10
6
H
D
Don't screw tied
x 2
x 4
x 2
x 2
L
R

ASSEMBLY INSTRUCTIONS 2 of 3
STEP 3
STEP 4 STEP 5
10
1B
D
10
6
4
7
E
A
3
7
6
x 4
x 4
STEP A
STEP B
x 2
**Finish step 5,
Please screw tied the step 2 bolt.

ASSEMBLY INSTRUCTIONS 3 of 3
* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
8
G
D
STEP 6 STEP 7