GMI SRE-100 User manual

SRE-100 INSTRUCTOR STATION
TOOLS REQUIRED FOR ASSEMBLY
Cordless drill with phillips head Bit & magnetic extension,
3/8" Magnetic socket bit.
BEFORE ASSEMBLING THE WORKBENCH
Read through the assembly instructions to
familiarize yourself with the order in which the
parts are assembled. We suggest that you clear
& vacuum the area where the bench is to be
assembled. It is important that the bench is
assembled in the same sequence as instructed.
HARDWARE & GMI COMPONENTS
All assembly hardware is provided. Full size photos
accompany each step where hardware is needed.
STEP 1
Modesty Panel
STEP 2
Place the top on the assembled base.
Adjust until it matches the view to the
right.
Attach the top to the bases. (You must
remove the top drawer(s) from drawer
cabinets).
Use #14 x 1" Lag Screws. 4 for Cabinets
6 for Leg pedestals.
Attach the modesty panel to the base
cabinets. Use four 1/4-20 x 1/2" Bolts.
Hand start all bolts or you may strip the
threaded insert.
**Your base cabinets may be different than
those shown. Follow the same instructions**
1" Front
1" Left Side
Same Distance
Front & Back

STEP 3
The wire cover covers the cables
as they run from the grommet hole
to the CPU on the front side of the
modesty panel.
Adhesive velcro holds the bottom
lip of the cover to the modesty panel.
Use #8 x 5/8" black screws to attach
the cover to the top.
STEP 4
Double sided velcro strips are provided
for additional wire management. These
are optional. Screw them to the bottom
of the work surface as needed. Attach
with (1) #8 x 5/8" black screw in the center
of each velcro strip.
STEP 5
OPTIONAL CPU RACK
Attach the CPU rack. Instructions &
hardware are enclosed in the CPU
rack box.
Wire Cover