Lippert Moon User manual

Moon Table Leg
OWNER'S MANUAL

Rev: 05.22.23 Page 2 CCD-0007409
TABLE OF CONTENTS
Introduction 2
Safety 2
Operation 3
Introduction
The Moon Table Leg provides support for a table. It can also be folded up for storage and the extension can
be folded to align the table with the base of a couch in order to create a bed.
Additional information about this product can be obtained from lci1.com/support or by downloading
the free LippertNOW app. The app is available on Apple App Store® for iPhone® and iPad® and also on
Google Play™ for Android™ users.
Apple App Store®, iPhone®, and iPad® are registered trademarks of Apple Inc.
Google Play™ and Android™ are trademarks of Google Inc.
For information on the assembly or individual components of this product, please visit:
https://support.lci1.com/lci-interiors
NOTE: Images used in this document are for reference only when assembling, installing and/or operating
this product. Actual appearance of provided and/or purchased parts and assemblies may differ.
Safety
Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions,
i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This
manual cannot begin to plot out instructions for every possibility, but provides the general instructions,
as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the
provided instructions may result in death, serious personal injury, severe product and/or property damage,
including voiding of the Lippert limited warranty.
Moving parts can pinch, crush or cut. Keep clear and use caution.
The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury
and/or product or property damage if not safely adhered to and within the parameters set forth
in this manual.

Rev: 05.22.23 Page 3 CCD-0007409
Operation
1. To fold up leg, press button on side of leg near the top (Fig. 1). The button will unlock the leg.
2. Swing the leg 90 degrees to the storage position (Fig. 2).
3. If the extension is added to the leg, the extension can also be folded 90 degrees by pressing the button
on the connector to unlock the leg.
NOTE: The dinette position with the extension folded up (Fig. 3) can align the table with the base of a
couch in order to create a bed.
Button
Button
Fig. 1
Footpad
Long Leg Section
Fig. 2
Fig. 3
Storage Position
Dinette Position
Extension

The contents of this manual are proprietary and copyright protected by Lippert. Lippert prohibits the copying or
dissemination of portions of this manual unless prior written consent from an authorized Lippert representative
has been provided. Any unauthorized use shall void any applicable warranty. The information contained in this
manual is subject to change without notice and at the sole discretion of Lippert. Revised editions are available
for free download from lippert.com.
Please recycle all obsolete materials.
For all concerns or questions, please contact Lippert
Ph: 432-LIPPERT (432-547-7378) | Web: lippert.com | Email: [email protected]