Coaster Grandfather Clock 900723 User manual

Ⅻ
Ⅰ
Ⅱ
Ⅲ
Ⅱ
Ⅱ
Ⅴ
Ⅵ
Ⅶ
Ⅷ
Ⅸ
Ⅹ
Ⅺ
PARTS IDENTIFICATION
Your clock is fitted with a Westminster Chiming movement. This has an automatic night silence function that silences the
Chimes between 10.00 P.M. and 6.00 A.M.(last strike 9:00PM, first strike 6:00AM).
Please make sure you have 2 x D Alkaline batteries, as these are not included. You will also need a screwdriver.
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
ASSEMBLY TIME PER UNIT: 20 MINUTES
1PC
8PCS
QTYFIGUREDESCRIPTION DESCRIPTION QTYFIGURE
2PCS
BOLTφ8*40mm
FIXING BARS
Z
1
2
3
4
5
6
HARDWARE IDENTIFICATION
ASSEMBLY TIPS:
Warning!
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify patrs that are broken or defective. Please contact the store immediatelly.
2.This product is for home use only and not intended for commercial establishments.
PART NAME FIGURE QTY PART NAME FIGURE QTY
ATOP UNIT 1PCFBASE UNIT
1PC
GTOP
DECORATION
1PC
HPENDULUM
2PCS
IDECORATION
WEIGHTS
4PCS
JDECORATION
CHAINS
1PC
BFRONT DOOR
1PC
CLEFT SIDE
PANEL
1PC
DRIGHT SIDE
PANEL
1PC
EBACK PANEL
CABLE TIE
LONG SCREW
SHORT SCREW
PLASTIC ANCHOR
1PC 1PC
1PC
1PC
ITEM:900723
SIZE AA
SIZE C
2 PCS 3 PCS
ALKALINE BATTERIES REQUIRED ASSEMBLY TOOLS REQUIRED
PAGE 2 OF 8
COASTERFURNITURE.COM

NOTES: PLEASE MAKE SURE CLOCK IS IN LEVEL POSITION, OTHERWISE
IT WILL NOT OPERATE PROPERLY.
STEP 1-1 STEP 1-2
STEP 2-1 STEP 2-2
STEP 3
①
C
F
F
C
D
C
F
①
①
F
C
D
C
D
E
E
ITEM:900723
PAGE 3 OF 8
COASTERFURNITURE.COM

STEP 4-1 STEP 4-2
STEP 5
STEP 6
G
A
C
①
①
A
①
A
D
①
A
D
C
ITEM:900723
PAGE 4 OF 8
COASTERFURNITURE.COM

Ⅻ
Ⅰ
Ⅱ
Ⅲ
Ⅱ
Ⅱ
Ⅴ
Ⅵ
Ⅶ
Ⅷ
Ⅸ
Ⅹ
Ⅺ
STEP 7-1 STEP 7-2
STEP 8
STEP 9
ｈｏｌｅ
ｈｏｏｋ
J
short chain
long chain
weight
pendulum H
J
I
H
②
B
D
ITEM:900723
PAGE 5 OF 8
COASTERFURNITURE.COM

BACK OF THE CLOCK
ATTENTION: ANTI TIPPING SAFEGUARD
STEP 10
WALL
⑥④
③
1.Insert 2 x C Batteries into the Pendulum Battery
Chamber.Ensure that the positive and negative
symbols are aligned as shown.
2.Push Pendulum Hanger lightly,to release the
Pendulum Hanger from "Pendulum Hanger Shipping
Retainer", and to allow Pendulum to swing freely.
3. Hang the Pendulum (H) as shown in the figure
below.Make sure that the bright side of the Pendulum
Bob fces te front of the clock.
4. Hang the Decorative Weight (I) as in the figure
below.
5. Lightly push the Pendulum (H) sideways to let it
swing.
IMPORTANT NOTICE: PLEASE MAKE SURE THE
PENDULUM HANGER" IS RELEASED FROM THE
"PENDULUM HANGER SHIPPING RETAINER",
OTHERWISE THE PENDULUM WILL NOT SWING.
Ｐｅｎｄｕｌｕｍ
Ｓｅｃｔｉｏｎ
Pendulum Hanger
Pendulum Battery Chamber
Pendulum Hanger Shipping
Retainer(Push to release Pendulum)
ＳＩＺＥ Ｃ
ＳＩＺＥ Ｃ
PENDULUM INSTRUCTION
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint is not a substitute for proper adult supervision.
This restraint may provide protection against tipping furniture.
Do not allow children to climb on furmiture.
Failure to detach this restraint before moving furniture may
result in injury and damage.
④
⑤
③
ITEM:900723
PAGE 6 OF 8
COASTERFURNITURE.COM

Chime Battery
Chamber
Switch
Volume
Control
Red“Set”
button
chime
section
FIGURE 2
ＳＩＺＥ ＡＡ
ＳＩＺＥ ＡＡ
ＳＥＴ
Before setting time, chime and pendulum, please open the
back panel on the Top Unit. Aer removing the cover,
please refer to the figure at the right to identify and locate
the following items:
■ Clock Section
■ Clock Battery Chamber
■ Chime Section
■ Chime Battery Chamber
■ Pendulum Section
■ Pendulum Battery Chamber
1. Turn the hands to 6:30 by using the Hand Set Knob (Figure 1).
Make sure the hands move CLOCKWISE ONLY.
2. Insert 2 x AA Batteries as shown (Figure 2). Ensure that the positive
(+) and negative (-) symbols are aligned as shown.
3. Insert 1 x AA Battery into the
Clock Battery Chamber (Figure
1).Ensure the positive (+) and
negative (-) symbols are aligned as
shown.
4. Press the Red 'Set' Button once
to start the chiming sequence.
5. Your clock will play the 'Westminster' chime and 'strike' six
times indicating 6:00am.Your clock is now set to the correct
chiming sequence.
6. Aer setting the correct chiming sequence,then set the clock to
the correct time with the Hand Set Knob.
E.g.-if you are setting the clock to 8 o'clock in the evening,8:00 pm,you will need to move the hands
forward to 12 o'clock and then continue to 8 o'clock to show 8:00 pm. Alternatively, if the time is 8:00
am when you are setting,you just move the hands forward from 6:30 to 8:00. The clock now knows it
is 8:00 am.
If the clock time is not right or the clock chimes incorrectly,please replace the batteries,and follow
the set time and chime procedure as above.
Your clock will not chime or strike aer 9:00 pm,It has an AUTOMATIC night mute with the last strike
at 9:00 pm and the first at 6:00 am.
SETTING INSTRUCTIONS
Clock Battery
Chamber
Hand Set
Knob
Clock
Section
ＳＩＺＥ ＡＡ
QUARTZ
FIGURE 1
Ｐｅｎｄｕｌｕｍ
Ｓｅｃｔｉｏｎ
Clock Battery
Chamber
Ｃｌｏｃｋ
Ｓｅｃｔｉｏｎ
ｓｐｅａｋｅｒ
ｓｅｃｔｉｏｎ
ＳＩＺＥ ＡＡ
ＱＵＡＲＴＺ
Chime Battery
Chamber
ｃｈｉｍｅ
ｓｅｃｔｉｏｎ
ＳＩＺＥ ＡＡ
ＳＩＺＥ ＡＡ
ＳＥＴ
ＳＩＺＥ Ｃ
ＳＩＺＥ Ｃ
SETTING TIME AND CHIME
1 2 3 4
1 2 3 4
ITEM:900723
PAGE 7 OF 8
COASTERFURNITURE.COM

TROUBLESHOOTING
Here are a few symptoms that are associated with 'Defective Batteries' or 'Incorrect Installation'
and do not indicate that the clock itself is defective:
Problem
Your clock strikes six(6) times on every hour.
Solution
Change the chime section batteries, and set time and chime again by following "SETTING TIME AND
CHIME"procedure.
Problem
Your clock starts to chime erratically on every hour.
Solution
Press the Red "Set" Button, the clock will chime, and increase one chime per push, push to the
correct chime.
If this method still does not solve the problem, replace the chime battery, and set time and chime
again by following the "SETTING TIME AND CHIME" procedure.
Problem
Your clocks chimes are getting quieter and quieter.
Solution
Change the chiming section batteries and turn the volume down to about half way.
Problem
Your clock does not chime at 10 pm.
Solution
Your clock has an Automatic night mute with the last strike at 9pm and the first strike at 6am.
Problem
Can I change when the night mute starts and stops?
Solution
No, this function is not available.
Problem
You clock does not chime during the day.
Solution
Reset the clock according to the "SETTING TIME AND CHIME" procedure.
CAUTION
Do not mix Old and New batteries. Do not mix Alkaline, and Standard(Carbon - Zinc) or
Rechargeable(Nickel - Cadmium) batteries.
ITEM:900723
PAGE 8 OF 8
COASTERFURNITURE.COM

▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
188mm
(7.40")
410mm(16.15")
58mm(2.28")
510mm(20.08") 815mm(32.08")
1820mm(71.75")
280mm(11.02")
345mm (13.58")
215mm
(8.46")
▲
▲
▲
▲
▲
▲
385mm (15.16")
▲
▲
480mm(18.90")
100mm(3.94")
225mm
(9")
508mm(20")
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
188mm
(7.40")
410mm(16.15")
58mm(2.28")
510mm(20.08") 815mm(32.08")
1820mm(71.75")
280mm(11.02")
345mm (13.58")
215mm
(8.46")
▲
▲
▲
▲
▲
▲
385mm (15.16")
▲
▲
480mm(18.90")
100mm(3.94")
225mm
(9")
508mm(20")
▲
▲
ITEM:900723
COASTERFURNITURE.COM