Coaster 100772 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
REVISION 0: 01/10/2006
REVISION 1: 02/07/2012
REVISION 2: 10/10/2019
Dining Side Chair
100772
COASTERFURNITURE.COM
PAGE 1 OF 4

FRONT LEG FRAME
BACK FRAME 1PC
SIDE RAIL 2PCS
SEAT CUSHION
1PC
1PC
NOTE :
Phillips head screw driver is required in the assembly process.However,manufacturer does not provide this item.
Quantities shown are for one chair.
HARDWARE IDENTIFICATION
A
BOLT
(M6 x 50mm - RBW)
ALLEN WRENCH
(M4 x 110mm - BLK)
6PCS
1PC
PARTS IDENTIFICATION
B
1
2
3
4
ITEM :
ASSEMBLY TIME 10 MINUTES
2. This product is for home use only and not intended for commercial establishments.
1. Don't attempt to repair or modify parts that are broken or defective.Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
2. Please check to see that all hardware and parts are present prior to start of assembly.
1. Remove hardware from box and sort by size.
100772
LOCK WASHER
(1/4" - BLK)
PAGE 2 OF 4
ASSEMBLY INSTRUCTIONS
6PCS
4PCS
ASSEMBLY TIPS :
WARNING !
COASTERFURNITURE.COM
C
D
PAN HEAD SCREW
(#8 x 1" - BLK)

C
C
B
123
A
321
ITEM :
STEP 1
STEP 2
ASSEMBLY INSTRUCTIONS
PAGE 3 OF 4 COASTERFURNITURE.COM
100772

BOTTOM VIEW
D
4
ITEM :
STEP 3
STEP 4
COMPLETE
ASSEMBLY INSTRUCTIONS
PAGE 4 OF 4 COASTERFURNITURE.COM
100772

38.39"
19.09"
20.87"
14.29"
16.93 "
16.93"
15.55"
20.67"
ITEM :
COASTERFURNITURE.COM
13.58"
16.93"
100772