Coaster 950172ii User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
REVISION 0 : 03/15/2018
PAGE 1 OF 9 COASTERFURNITURE.COM
CURIO CABINET
950172ii
REVISION 1 : 09/10/2019

ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
COASTERFURNITURE.COM
ASSEMBLY TIME 50 MINUTES
PARTS IDENTIFICATION
1PCA DOOR GLASS
1555x382mm
950172ii
ITEM:
WARNING!
PAGE 2 OF 9
2PCSB SIDE GLASS
1576x345mm
1PCC BACK GLASS
1576x387mm
2PCS
DPLASTIC BAR
4PCSE CROSSBAR
1PCF1 TOP WOOD PANEL
1PCF2 BOTTOM WOOD PANEL

COASTERFURNITURE.COM
PAGE 3 OF 9
PARTS IDENTIFICATION
3PCSG GLASS SHELF
382x285mm
ASSEMBLY INSTRUCTIONS
950172ii
ITEM:
HARDWARE IDENTIFICATION
4PCS
1PLASTIC FEET
(∅44 x 18mm)
8PCS
4PCS
7
2PCS
8PCS
BOLT-LARGE
(1/4" x 1-3/4")
WASHER
(1/4" x 16mm)
BOLT-SMALL
(∅7 x 6mm)
PLASTIC MAGNET
(19mm)
2
8
31PC
HANDLE
(40mm)
9
12PCS 1PC
12PCS
SUCTION CUP
(∅20 x 28mm)
BOLT-MEDIUM
(∅8 x 30mm)
METAL CONTACT
(40mm)
4
10
52PCS
TWIN ADHESIVE
(38 x 42mm)
11
2PCS
HINGE
(40mm)
64PCS
SCREW
(∅8 x 22mm)
12
13
14
15
16
2PCS
HINGE INSERT
(38mm) 1PC
ALLEN KEY
(4mm)
2PCS
METAL CONTACT
(38mm) 4PCS
STICKER
(∅20mm)

COASTERFURNITURE.COM
PAGE 4 OF 9
ASSEMBLY INSTRUCTIONS
950172ii
ITEM:
STEP 1
STEP 2
1
2
3
2
14
1
2
2
2
2
3
3
3
3
14
14
14
1
1
1
1
14
F2
F2
E
E
D
E
E
C
D

COASTERFURNITURE.COM
PAGE 5 OF 9
ASSEMBLY INSTRUCTIONS
950172ii
ITEM:
STEP 3
STEP 4
1
2
45
4
5
45
4
5
4
5
F2
2
2
2
2
3
3
3
3
F1
B
B
4
5
4
5

COASTERFURNITURE.COM
PAGE 6 OF 9
ASSEMBLY INSTRUCTIONS
950172ii
ITEM:
STEP 5
STEP 6
G
G
G
7
6
6
7
10
10
10
7
6
6
7

COASTERFURNITURE.COM
PAGE 7 OF 9
ASSEMBLY INSTRUCTIONS
950172ii
ITEM:
COMPLETE
STEP 8
STEP 7
11
13
12
13
A
13
12
13
11
9
9
8
8
9
8
16
16

COASTERFURNITURE.COM
PAGE 8 OF 9
ASSEMBLY INSTRUCTIONS
950172ii
ITEM:
Product Size : 425 X 362 X 1620 H (MM)
Product Size : 16 3
4" X 14 1 4" X 63 3 4"
63 3
4"
1620 mm
16 3
4"
425 mm
14 1
4"
362 mm
16 3
4" x 14 1 4" x 3 4"
425 x 362 x 18mm Wood
15"
382 mm
11 1
4"
285 mm
14 1
4"
360 mm
15" x 11 1
4" x 1 4"
382 x 285 x 5mm Glass
15" x 11 1
4" x 1 4"
382 x 285 x 5mm Glass
15" x 11 1
4" x 1 4"
382 x 285 x 5mm Glass
15 1
4"
385 mm
15 1
4"
385 mm
15 3
4"
397 mm
Note : Dimension tolerance ±5%

This tip restraint must be attached to a wall STEP 2
stud using long screw enclosed.
STEP 1
STEP 3
Attach a bracket securely to the back top rail of
the furniture using short screw provided, through
the smaller hole.
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of the furniture. Attach the wall
stud using the long screw provided, through the
smaller hole.
PAGE 4 OF 4 COASTERFURNITURE.COM
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the larger hole in each mounting bracket. Bring both ends together and slide the
flat end through the locking end and draw it through until all slack is removed. Confirm that the strap is
securely laced and locked.
ITEM: 205443
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
Failure to detach this restraint before moving the furniture may result in injury and damage.
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
a plastic wall
950172ii
PAGE 9 OF 9