tropitone Curve Chaise User manual

curve

Assemble furniture on a soft surface (i.e.: carpet, cardboard) to
prevent scratches.
Do not assemble with electrical tools, including battery powered ones.
Do not try to lift or flip furniture components with only one person.
Components may be heavy and awkward to handle, and may result in
injury to persons or damage to property if not lifted properly.
assembled furniture is heavy. assemble at place of use.
chaise with riser
COMPONENTS
A B
Chaise Riser
x 1 x 1
REQUIRED TOOL(S) HARDWARE
Phillips Head Screwdriver Screw #14 x 2" Washer
x 4 x 4
üCheck that all hardware and components are in your carton before
you start assembly.
Congratulations on the purchase of your Tropitone® Curve Chaise with Riser.
Read through all steps before fastening components together.
ASSEMBLY INSTRUCTIONS
CAUTION!
2 | tropitone.com

For care and cleaning instructions, refer to the Tropitone® Care, Maintenance,
Safety & Warranty Information guide included with your furniture and
available at www.tropitone.com/warranty.
If you have difficulty understanding any of the instructions and need
assistance while assembling your Curve Components, please call Tropitone’s
Customer Service Center at 949.951.2010.
ASSEMBLY STEPS
#14 x 2" x 4
x 4
B
A
chaise with riser
1. Place the Riser (B) on the Chaise (A).
Center the top of the Riser to the Chaise
seams and confirm the four pilot holes in the
Chaise Lounge are visible through the Riser.
2. Insert screws and washers as shown
and tighten firmly by hand.
CARE INSTRUCTIONS
CUSTOMER SERVICE
tropitone.com | 3

Tropitone Furniture Co., Inc.
5 Marconi
Irvine, California 92618
949 951 2010 phone
www.tropitone.com
Warranty
For our current Warranty and
product care information, please visit
www.tropitone.com/warranty
Part # R9T00016
©2015 Tropitone Furniture Co., Inc.
12/15