Coaster 224035 User manual

ASSEMBLY INSTRUCTIONS
Fine Furniture for every stage of life
224035
Chest
REVISION 0 : 05/09/2022
PAGE 1 OF 4 COASTERFURNITURE.COM
COASTER FINE FURNITURE

224035
10 MINUTES
HARDWARE IDENTIFICATION
A CHEST 1 PC
1THREADED BOLT 4 PCS
(3/8" x 2 3/4" - SR)
COASTERFURNITURE.COM
ITEM:
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast and easy assembly.
WARNING !
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishment.
ASSEMBLY TIME
PARTS IDENTIFICATION
PAGE 2 OF 4
B LEG 4 PCS

224035
STEP 1
STEP 2
COMPLETE
COASTERFURNITURE.COM
ASSEMBLY INSTRUCTIONS
ITEM:
PAGE 3 OF 4
A
B
B
A
1

ANTI-TIPPING INSTALLMENT INSTRUCTION
FURNITURE TIPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture may result in injury and demage.
This tip restraint must be attached to a wall
stud using long screw enclosed.
STEP 1
Attach a bracket securely to the back top rail of
the furniture using short screw provided, through
the smaller hole.
STEP 2
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of the furniture. Attach the wall
stud using the long screw provided, through the
smaller hole.
STEP 3
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the larger hole in each mounting bracket. Bring both ends together and slide the
flat end through the locking end and draw it through until all slack is removed. Confirm that the strap is
securely laced and locked.
PAGE 4 OF 4 COASTERFURNITURE.COM
WALL
WALL
224035ITEM:

224035
COASTERFURNITURE.COM
ITEM:
Inner Size of Drawer A : 16.50"W X 13.00"D X 4.50"H X 0.50"T
Inner Size of Drawer B : 35.75"W X 13.00"D X 7.00"H X 0.50"T
Note : Dimension tolerance + 5 %
_
Inner Size of Drawer C : 35.75"W X 13.00"D X 9.25"H X 0.50"T
62.25"
17.75"
15.25"
40.50"
38.25"
10.50
20.00"44.00"
5.00"
A
A
A
A
B
C
C
B
5.75"
18.25"
8.00"
37.50"
37.50"