Coaster 105361 User manual

www.coastercompany.com
REVISION 0 : 05/26/2014
PAGE 1 OF 3
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
EXTENSION LEAF ROUND DINING TABLE
105361

PAGE 2 OF 3
ITEM : 105361 ASSEMBLY INSTRUCTIONS
www.coastercompany.com
2. This product is for home use only and not intended for commercial establishment.
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
2. Please check to see that all hardware and parts are present prior to start of assembly.
1. Remove hardware from box and sort by size.
immediately.
ASSEMBLY TIPS :
Warning !
PARTS IDENTIFICATION:
B
A
4PCS
1PC
TABLE LEG
TABLE TOP
HARDWARE IDENTIFICATION:
1
2
3
4LOCK WASHER
FLAT WASHER
8PCS
8PCS
ALLEN WRENCH 1PC
HEX BOLT 8PCS
C1PC
EXTENSION LEAF
D2PCS
APRON
5
6BOLT 4PCS
WRENCH 1PC

STEP 1
A
B
Place table top (A) upside down on soft surface. Align and
fasten all table legs (B) to table top (A) using hex bolt (3),
lock washer (4) and flat washer (5). Then fully tighten with
wrench (1).
PAGE 3 OF 3
ITEM : 105361 ASSEMBLY INSTRUCTIONS
www.coastercompany.com
STEP 2
Place extension leaf (C) upside down on soft surface. Align
and fasten aprons (D) to extension leaf (C) using bolts (6).
Then fully tighten with Allen wrench (2).
2
6
D
C
5
1
3
4
STEP 3 STEP 4
Flip table over using two people to lift and flip this table.
Then unlock table and pull apart. Place extension leaf onto the middle of the table. Push table top together making sure pins line up and table top close
tightly.
Then tighten all locks underneath the table top.