Coaster 204691Q User manual

ASSEMBLY INSTRUCTION
COASTER FINE FURNITURE
Fine Furniture for every stage of life
204691Q (B1&B2)
Queen Bed
COASTERFURNITURE.COM
PAGE 1 OF 6
REVISION 0 :05/29/2013
REVISION 1 :12/11/2019

ITEM : 204691Q (B1&B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 30 MINUTES
PARTS IDENTIFICATION
PAGE 2 OF 6
NOTE :
Phillips head screw driver is required in the assembly process ; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
B1 (BOX1)
A HEADBOARD PANEL 1PC
B LEFT 1PC
HEADBOARD LEG
C RIGHT 1PC
HEADBOARD LEG
D FOOTBOARD PANEL 1PC
B2 (BOX2)
G BED SLAT 4PCS
HB 204691Q (B1) 1PC
FROM BOX 1 HEADBOARD
COMPLETE
FB 204691Q (B1) 1PC
FROM BOX 1 FOOTBOARD
E LEFT 1PC
FOOTBOARD LEG
F RIGHT 1PC
FOOTBOARD LEG
H BED SLAT SUPPORT 4PCS
WITH LEVELER
I BED RAIL 2PCS

ASSEMBLY INSTRUCTIONS
PAGE 3 OF 4 COASTERFURNITURE.COM
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
HARDWARE IDENTIFICATION
PAGE 3 OF 6
NOTE :
Phillips head screw driver is required in the assembly process ; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
Z - B1 (BOX1) - HARDWARE PACK IS LOCATED IN 204691Q (B1)
1 ALLEN WRENCH 1PC
(M4 - BLK)
2 BOLT 12PCS
(M6 x 45mm - RBW)
3 LOCK WASHER 12PCS
(M6 x 13mm - RBW)
4 SMALL FLAT WASHER 4PCS
(M6 x 13mm - RBW)
Z - B2 (BOX2) - HARDWARE PACK IS LOCATED IN 204691Q (B2)
7 FLAT HEAD SCREW 8PCS
(M4 x 32mm - RBW)
ITEM : 204691Q (B1&B2)
5 BIG FLAT WASHER 8PCS
(M6 x 19mm - RBW)
6 WOOD PLUG 4PCS

ASSEMBLY INSTRUCTIONS
PAGE 4 OF 6 COASTERFURNITURE.COM
STEP 1
STEP 2
ITEM : 204691Q (B1&B2)
1.1
1.2
1.3
2.1
2.2
2.3

COASTERFURNITURE.COM
ITEM : 204691Q (B1&B2)
ASSEMBLY INSTRUCTIONS
PAGE 5 OF 6
STEP 3
STEP 4
4.1
4.2

ITEM : 204691Q (B1&B2)
COASTERFURNITURE.COM
ASSEMBLY INSTRUCTIONS
STEP 5
COMPLETE
PAGE 6 OF 6

COASTERFURNITURE.COM
ITEM : 204691Q (B1&B2)
977
8!77
67
!77
!!7
966
977
"77
97!
77
77
977
#$%&'(')*+&,-*$,'%$.&/0,1&'234
977677