Coaster 107931 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
107931
Dining Table
REVISION 0 : 05/16/2019
PAGE 1 OF 4
COASTERFURNITURE.COM
REVISION 1 : 08/20/2021

ITEM:107931
PARTS IDENTIFICATION
B1 ( BOX 1)
A GLASS TOP 1PC
B2 ( BOX 2)
B LEG 4PCS
CCONNECTION
BOX 1PC
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 2 OF 4
COASTERFURNITURE.COM
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 107931 (B2)
HARDWARE IDENTIFICATION
1ALLEN KEY
(4MM)
1PC
2SCREW
(M6*10)
4PCS
3SCREW
(M8*10)
8PCS
4ALLEN KEY
(5MM)
1PC
5ADJUSTING FOOT
(Φ20*7*M6*10)
4PCS
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 10 MINUTES

ITEM:107931
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
STEP 3
COMPLETE
PAGE 3 OF 4
COASTERFURNITURE.COM

ITEM:107931
PAGE 4 OF 4
COASTERFURNITURE.COM
524.5mm(20.75")
524.5mm(20.75")