kingsley-bate Ipanema IP20 User manual

Kingsley-Bate
IP20 Ipanema Side Table
Assembly Instructions

KINGSLEY–BATE
Fine Garden Furniture
0ASSEMBLY INSTRUCTIONS FOR THE IP–20
LEG ASSEMBLY TOP LEG ASSEMBLY
1NOTE:
2A TENON
6B MORTISE HOLE
3STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE: During assembly of the furniture please match all joints with the corresponding letters
or numbers stamped on the furniture.
4STEP-II
Lay TABLE TOP on a clean, flat surface and fit the LEG ASSEMBLY
mortise holes to the TABLE TOP ten ons as seen in the phot ograph. If
necessary, gently rock the LEG AS SEMBLY while pushing tenons into
mortise holes unti l joints fit snugly together. Make sure to match the
numbered tenons with the corresponding mortise holes.
5STEP-III
Secure the LEG ASSEMBLIES to th e TABLE TOP with the knock down
bolts provided; all bolts can now be tightened by using the allen key
provided. Carefully upright table.
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE DEALER
NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR
CHOOSING OUR FURNITURE.
*KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.
7200 Gateway Court, Manassas, Virginia 20109
Phone: [phone], Fax: [phone]