Coaster 108808 User manual

REVISION 0 : 05/17/2018
REVISION 1 : 07/19/2018
PAGE 1 OF 3
108808
COUNTER HEIGHT TABLE
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com

ASSEMBLY INSTRUCTIONS
QTY
QTY
www.coastercompany.com
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
PAGE 2 OF 3
ASSEMBLY TIME
6
FLAT HEAD SCREW
8PCS
(Ф3/19'' x 1-1/2'' - RBW)
7
WAFER HEAD SCREW
6PCS
(Ф3/19'' x 1-1/2'' - BLK)
4
WOOD DOWEL
4PCS
(Ф5/16'' x 1-9/50'')
5
WOOD PLUG
8PCS
(13MM - BLK)
2
BOLT
10PCS
(Ф4/17'' x 2''- RBW)
3
LOCK WASHER
10PCS
(Ф4/17'' - RBW)
HARDWARE IDENTIFICATION
HARDWARE NAME FIGURE
1
ALLEN WRENCH
1PC
(4MM - BLK)
CAPRON 2PCS
DCROSSBAR 1PC
BLEG 2PCS
ITEM :
108808
12 MINUTES
PARTS IDENTIFICATION
PART NAME FIGURE
ATOP 1PC
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy
assembly.
!
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact
the store immediately.
2. This product is for home use only and not intended for commercial establishments.

ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2 STEP 3
STEP 4
COMPLETE
www.coastercompany.com
ITEM : 108808
PAGE 3 OF 3