Coaster 115275 User manual

COASTER FINE FURNITURE
ASSEMBLY INSTRUCTIONS
Fine Furniture for every stage of life
115275
Server
COASTERFURNITURE.COM
PAGE 1 OF 4
REVISION 0 : 02/18/2022

ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
10 MINUTES
PARTS IDENTIFICATION
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact
the store immediately.
2. This product is for home use only and not intended for commercial establishments.
A
B
SERVER
LEG FRAME
1PC
2PCS
HARDWARE IDENTIFICATION
1BOLT WITH WASHER
(M6 x 40mm - BLK)
10PCS
ITEM : 115275
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIME
COASTERFURNITURE.COM
PAGE 2 OF 4
4PCS
2FLAT HEAD SCREW
(M5 x 32mm - BLK)
1PC
3ALLEN WRENCH
(M4 - GD)
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.

STEP 1
STEP 2
COMPLETE
ASSEMBLY INSTRUCTIONS
ITEM :
115275
COASTERFURNITURE.COM
PAGE 3 OF 4
1
3
2
A
B
Protective surface

This tip restraint must be attached to a wall STEP 2
stud using long screw enclosed.
STEP 1
STEP 3
Attach a bracket securely to the back top rail of
the furniture using short screw provided, through
the smaller hole.
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of the furniture. Attach the wall
stud using the long screw provided, through the
smaller hole.
PAGE 4 OF 4 COASTERFURNITURE.COM
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the larger hole in each mounting bracket. Bring both ends together and slide the
flat end through the locking end and draw it through until all slack is removed. Confirm that the strap is
securely laced and locked.
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
Failure to detach this restraint before moving the furniture may result in injury and damage.
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
WALL
WALL
ITEM :
115275

ITEM :
115275
COASTERFURNITURE.COM
53.25"
17.75"
8.50"
6.25"
17.75"
12.75"
46.75"
50.50" 15.00"
4.75"
8.50"
7.00"
32.00"
22.25"
Note : Dimension tolerance ±5%