Coaster 183038 User manual

COASTERFURNITURE.COM
Fine Furniture for every stage of life
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
PAGE 1 OF 14
REVISION 0 : 06/01/2020
183038
BAR CABINET

183038
ITEM:
COASTERFURNITURE.COM
PAGE 2 OF 14
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIME
PARTS IDENTIFICATION
80 MINUTES
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
ALEFT SIDE
PANEL 1 PC
BRIGHT SIDE
PANEL 1 PC
CLEFT DIVIDER
PANEL 1 PC
DRIGHT DIVIDER
PANEL 1 PC
ESMALL DIVIDER
PANEL 4 PCS
FBOTTOM PANEL 1 PC
GLOWER SHELF
PANEL 1 PC
HMIDDLE SHELF
PANEL 1 PC
IUPPER SHELF
PANEL 1 PC
JTOP PANEL 1 PC
KCROSS PANEL 1 PC
LBACK PANEL 3 PCS
MLARGE CROSS
PANEL 1 PC
NADJUSTABLE
SHELF 2 PCS
OLEFT DOOR 1 PC
PRIGHT DOOR 1 PC
QMETAL FRAME 2 PCS
RCROSSBAR 1 PC

183038
ITEM:
COASTERFURNITURE.COM
PAGE 3 OF 14
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
HARDWARE IDENTIFICATION
Z
Z13,Z17,Z18,Z19 not included in blister packaging.
NO DESCRIPTION FIGURE Q’TY
1GLUE 40g 1 PC
2WOODEN DOWEL
Ø8x30mm 42 PCS
3CAM BOLT
Ø7x35.5mm SR 10 PCS
4CAM LOCK
Ø15x12mm SR 10 PCS
5SCREW
Ø4.5x42mm SR 8 PCS
6PIN FOR
ADJUSTABLE SHELF
Ø4.9x8mm SR 8 PCS
7PIN FOR DOOR
Ø5.8x25mm BLK 2 PCS
8WOODEN DOWEL
Ø8x50mm 4 PCS
9LONG BOLT
M6x43mm BLK 3 PCS
10 BOLT
M6x38mm BLK 6 PCS
NO DESCRIPTION FIGURE Q’TY
11 BOLT
M6x19mm BLK 14 PCS
12 ALLEN WRENCH
4mm SR 1 PC
13 HANGING CUP
HOLDER SR 2 PCS
14 SCREW
Ø4x17mm SR 8 PCS
15 SCREW
Ø5x35mm BLK 8 PCS
16 STICKER
Ø 20mm 2 PCS
17
TRACK BAR
L=920mm BLK
1 PC
18 TRACK SPACER
Ø25x25mm BLK 3 PCS
19 ROLLER
Ø40.5x160mm BLK 4 PCS
SBOTTOM
CROSSBAR 1 PC

183038
ITEM:
PAGE 4 OF 14 COASTERFURNITURE.COM
INCORRECT
CORRECT
STEP 1
Apply glue on all wooden dowels to
ensure integrity of the structure.
STEP 2
the reverse side
A
B
CD
2
2
3
2
x 16
3
x 2
KK
2
2
x 6
18
917
17
18
x 3
9
x 3
12

183038
ITEM:
PAGE 5 OF 14 COASTERFURNITURE.COM
STEP 3
STEP 4
2
x 12
13
x 2
14
x 8
14
13
2
Apply glue on all wooden dowels to
ensure integrity of the structure.
2
J
50mm
8
3
3
x 8
2
x 8
8
x 4
E
- 1
x 2
E
- 2
x 2
G
H
I

183038
ITEM:
PAGE 6 OF 14 COASTERFURNITURE.COM
STEP 5
STEP 6
1
1
E
- 1
E
- 2
C
D
G
H
I
G
Apply glue on all wooden dowels to
ensure integrity of the structure.

183038
ITEM:
PAGE 7 OF 14 COASTERFURNITURE.COM
STEP 7
STEP 8
1
1
4
4
A
B
K
J
A
B
4
x 2
16
x 2
4
16
4
x 4
16
x 4
Apply glue on all wooden dowels to
ensure integrity of the structure.

183038
ITEM:
PAGE 8 OF 14 COASTERFURNITURE.COM
STEP 9
STEP 10
4
x 4
16
x 4
5
x 8
1
4
B
CD
F
L
L
L
B
1
Apply glue on all wooden dowels to
ensure integrity of the structure.
5

183038
ITEM:
PAGE 9 OF 14 COASTERFURNITURE.COM
STEP 11
STEP 12
F
Q
Q
10
10
12
x 4
10
x 2
11
x 6
12 15
x 2
15
10
11 R
S

183038
ITEM:
PAGE 10 OF 14 COASTERFURNITURE.COM
STEP 13
STEP 14
M
NN
15
x 6
15
6
x 8
7
x 2
6
7

183038
ITEM:
PAGE 11 OF 14 COASTERFURNITURE.COM
STEP 15
STEP 16
OP
OP
19
x 4
19

183038
ITEM:
PAGE 12 OF 14 COASTERFURNITURE.COM
STEP 18
STEP 17
OP
11
x 8
12
11
COMPLETE

183038
ITEM:
PAGE 13 OF 14 COASTERFURNITURE.COM
Note : Dimension tolerance ±5%
300mm(11.81")
300mm(11.81")
300mm(11.81")
300mm(11.81")
300mm(11.81")
185mm(7.28")
300mm(11.81")
500mm(19.69")
110mm(4.33")
917mm(36.1")
966mm(38.03")
930mm(36.61")
351mm(13.78")
90mm(3.54")
90mm(3.54")
384mm(15.12")
332mm(13.07") 290mm(11.42")
100mm(3.94")
982mm(38.75")
395mm(15.5")
90mm(3.54")
1124mm(44.25")

ANTI-TIPPING INSTALLMENT INSTRUCTIONS
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture
may result in injury and damage.
1. To attach the anti-tip strap, securely mount one end to the top of the case piece with
the 5/8” screw.
2. Position the case piece against the wall in the desired location.
3. Pull the anti-tip strap taut and mark the position of where you will secure the other end
on the wall.
4. Drill a 1-1/4” hole in the spot you marked.
5. Tap in plastic wall plug.
6. Fasten anti-tip strap with wall screw provided.
(Please install the anti-tiping kit in the middle of the case piece if only have one set of anti-tipping kit.)
WALL
PAGE 14 OF 14 COASTERFURNITURE.COM