Winners Only T1-VG4296 User manual

SOLID TOP BUTTERFLY EXTENSION PEDESTAL TABLE
T1-VG4296
PART NO FIGURE DESCRIPTION Q'TY
Table Top
Leg
PARTS LIST
6 Pcs
1 Pc
1 Pc
Hardware Bag
DV14296-13
Pedestal 2 Pcs DV14296-08
DV14296-13
DV14296-08
DV14296-07
Apron Hinge 8 Pcs DV14296-02
Leaf Hinge 4 Pcs DV14296-09
Glides 2 Pcs DV14296-05
Support Leaf 2 Pcs DV14296-17
Leg Stretcher 1 Pc DV14296-18
Mounting Plate 2 Pcs DV14296-19
Hook Lock 6 Pcs DV14296-10
Support Leaf Hinge 2 Pcs DV14296-12
Apron Leaf 4 Pcs DV14296-20
DV14296-07
DV14296-20
DV14296-01
TBSR-10368BC-CNNN MADE IN MALAYSIA
PAGE 1 OF 3
DV14296-08

SOLID TOP BUTTERFLY EXTENSION PEDESTAL TABLE
T1-VG4296
TBSR-10368BC-CNNN MADE IN MALAYSIA
PAGE 2 OF 3
STEP 2
NOTE : THE UNIT SHOULD BE ASSEMBLED BY 2 OR MORE PEOPLE.
ASSEMBLY
STEP 1
Hex Nut
5/16" 5/16"
22 pcs
5/16"
Lock Washer
22 pcs
Flat Washer
22 pcs
Wrench
1 pce
HARDWARE PART :
Turn both pedestals upside down. Attach legs by
inserting hanger bolts through pre-drilled holes on
the pedestal. Put a Flat Washers, Lock Washers
and Hex Nuts onto the hanger bolts then tighten
Hex Nut using the Wrench. Attach leg stretcher by
inserting hanger bolt through pre-drilled holes on
pedestal, put a Flat Washers, Lock Washers and
Hex Nuts onto the hanger bolt, then tighten
Hex Nuts using the Wrench.
Position the table top upside down on a smooth, protective surface
such as carpet. Remove and discard the temporary wood strip.
STEP 3
Unlock the hooks underneath the table and pull the table top wide open equally from bolt ends. Align and attach the table top to the
pedestal. Insert a Flat Washer, a Lock Washer and Hex Nut onto the hanger bolt. Tighten all Hex Nut with the Wrench
provided.
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
Wrench
Hex Nut
Lock Washer
Flat Washer
Leg
Pedestal
Level Glide Leg Stretcher
Remove Wood Strip
Table Top
Unlock Hook
Wrench
Hex Nut
Lock Washer
Flat Washer

SOLID TOP BUTTERFLY EXTENSION PEDESTAL TABLE
T1-VG4296
TBSR-10368BC-CNNN MADE IN MALAYSIA
PAGE 3 OF 3
STEP 4
Lift both leaves from the compartment and flip up the aprons then unfold table leaf and place the leaf on the top surface carefully.
STEP 5
Push table top from both ends to close gap and lock the hooks underneath the table. Adjust the level glides until the table sits firmly.
TO STORE THE CENTRE LEAF WHEN NOT IN USE
Unlock the hooks underneath the table and pull the table top wide open equally from both ends. Flip down the aprons and fold the
centre leaf to store within the compartment. Push table top from both ends to close. Lock the hooks underneath the table.
Flip up apron
Flip down apron
Lock Hook
Unlock Hook
Level Glide
Lock Hook