Coaster 182677 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
182677
Barstool
REVISION 0 : 09/22/2023
PAGE 1 OF 5 COASTERFURNITURE.COM

ITEM: 182677
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
A BACKREST 1PC E FRONT RAIL (LONG) 1PC
BSEAT CUSHION
WITH FRAME 1PC F BACK RAIL (SHORT) 1PC
C LEFT LEG FRAME 1PC G FRONT STRETCHER
(LONG) 1PC
D RIGHT LEG FRAME 1PC H BACK STRETCHER
(SHORT) 1PC
1BOLT
(M6 x 50mm - RBW) 16PCS 4 WOOD DOWEL (M8 x 30mm-WOOD) 8PCS
2LOCK WASHER
(5/16" - RBW) 8PCS 5 ALLEN WRENCH (M4 x 100mm - BLK) 1PC
3FLAT WASHER
(M6 x 13mm - RBW) 8PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
20 MINUTES
HARDWARE IDENTIFICATION
ASSEMBLY TIME
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
PAGE 2 OF 5
PARTS IDENTIFICATION

ITEM: 182677
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
COASTERFURNITURE.COM
PAGE 3 OF 5
E
FH
G
4
FE
D
H
G
LONG
SHORT
SHORT
LONG
FRONT
MARKING HOLE
MARKING HOLE
5
1
2
LONG LONG
SHORT
SHORT
DO NOT FULLY TIGHTEN

ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
COASTERFURNITURE.COM
PAGE 4 OF 5
C
5
1
2
A
B
1
3
5
DO NOT FULLY TIGHTEN
DO NOT FULLY TIGHTEN
STICKER
FRONT
ITEM: 182677

ITEM: 182677
ASSEMBLY INSTRUCTIONS
STEP 5
STEP 6
COMPLETE
COASTERFURNITURE.COM
PAGE 5 OF 5
3
1
5
DO NOT FULLY TIGHTEN
FULLY TIGHTEN ALL BOLTS