Coaster 223581Q B1 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
223581Q(B1-B3)
Queen Bed
PAGE 1 OF 7 COASTERFURNITURE.COM
REVISION 0 : 02/17 /2023

223581Q(B1-B3)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
COASTERFURNITURE.COM
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
35 MINUTES
PARTS IDENTIFICATION
PAGE 2 OF 7
B1 (BOX 1)
A HEADBOARD PANEL 1PC
BHEADBOARD TOP DECORATION 1PC
C HEADBOARD SUPPORT 2PCS
D LEFT HEADBOARD LEG 1PC
E RIGHT HEADBOARD LEG 1PC
FEAR PANEL SUPPORT 2PCS
GHEADBOARD SUPPORT PANEL 1 PC
B2 (BOX 2)
H FOOTBOARD PANEL 1PC
B3 (BOX 3)
I BED SLAT 5PCS
J BED SLAT SUPPORT 5PCS
K LEFT BED RAIL 1PC
L RIGHT BED RAIL 1PC
M FOOTBOARD LEG 2PCS
ITEM:

ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B3 (BOX 3) - HARDWARE PACK IS LOCATED IN 223581Q (B3)
1ALLEN WRENCH
(Φ6 - BLK) 1PC
2SHORT BOLT
(Φ6 X 30mm - RBW) 4PCS
3MEDIUM BOLT
(Φ6 X 45mm - RBW) 15PCS
4LONG BOLT
(Φ6 X 60mm - RBW) 6PCS
5SHORT FLAT HEAD SCREW
(Φ4 X 16mm - RBW) 4PCS
6 10PCS
7 4PCS
8 20PCS
9 20PCS
10 14PCS
11 LEVELER
(M6 x 23mm - RBW) 5PCS
12 (M8 X 45MM) 4PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 3 OF 7
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
BIG FLAT WASHER
(3/8 x 25 x 1.0 - RBW)
MEDIUM FLAT WASHER
(Φ7 X 19mm X 2.0 - RBW)
LOCK WASHER
(Φ6 - RBW)
LONG FLAT HEAD SCREW
(Φ4 X 45mm - RBW)
MEDIUM FLAT HEAD SCREW
(Φ4 X 32mm - RBW)
223581Q(B1-B3)
ITEM:
WOOD DOWEL

ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
STEP 3
COASTERFURNITURE.COM
PAGE 4 OF 7
&&
*Attach the top of ear panel support on the
marking line at the lower part of the ear panel.
223581Q(B1-B3)
ITEM:

ASSEMBLY INSTRUCTIONS
STEP 4
STEP 5
STEP 6
COASTERFURNITURE.COM
PAGE 5 OF 7
*Tighten all the bolts.*Tighten all the bolts.
223581Q(B1-B3)
ITEM:

*Push D & G together
before fixing the screws.
*Tighten all the bolts.
STEP 7
STEP 8
STEP 9
COASTERFURNITURE.COM
PAGE 6 OF 7
ASSEMBLY INSTRUCTIONS
*Push D & E close to
the side of A.
*Tighten all the bolts.
223581Q(B1-B3)
ITEM:

STEP 11
STEP 12
COMPLETE
COASTERFURNITURE.COM
PAGE 7 OF 7
STEP 10
ASSEMBLY INSTRUCTIONS
* Tighthen the bolts at D & E.* Tighthen the bolts at D & E.
223581Q(B1-B3)
ITEM:

COASTERFURNITURE.COM
70.00"
78.75"
11.50"
"
9.00"
25.25"
35.00"
55.75"
63.00"
5.00" 81.00"
87.75"
60.75"
61.25"
Note: Dimension tolerance ±5%
Inner Size : 61.25"W x 81.50"D
223581Q(B1-B3)
ITEM: