Coaster 2408 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
2408
Bar Stool
COASTERFURNITURE.COM
PAGE 1 OF 6
REVISION 0: 04/02/2018
REVISION 1: 08/08/2022

AN LOWER LEG
BN UPPER LEG
1PC
1PC
1PC
1PC
1PC
CN
DN
EN
SWIVEL PLATE
BOTTOM RING
CUSHION SEAT
ITEM:2408
ASSEMBLY INSTRUCTIONS
PAGE 2 OF 6
COASTERFURNITURE.COM
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective.
Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 30 MINUTES
PARTS IDENTIFICATION
NOTE: QUANTITIES SHOWN ARE FOR ONE STOOL

1
2
3
4
5
6
7
ALLEN BOLT-LARGE (1/4" x 1-1/2"L - SR)
ALLEN BOLT-SMALL (1/4" x 3/4"L - SR)
SCREW TUBE (1/4" x 5/8"L - SR)
WASHER (Φ18mm - SR)
HEX NUT (5 x 10H mm - SR)
PLASTIC END CAP (Φ25 x 22mm - BLK)
ALLEN WRENCH (4 x 20W x 57L mm - SR)
8PCS
4PCS
4PCS
4PCS
4PCS
4PCS
2PCS
8 OPEN END WRENCH (60 x 15mm - SR) 1PC
ITEM:2408
HARDWARE IDENTIFICATION
PAGE 3 OF 6
COASTERFURNITURE.COM
NOTE: QUANTITIES SHOWN ARE FOR ONE STOOL

PAGE 4 OF 6
COASTERFURNITURE.COM
ITEM:2408
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
31
3
1
3
7
2.1
AN
BN
DN

ITEM:2408
ASSEMBLY INSTRUCTIONS
STEP 3 STEP 4
STEP 5
COMPLETE
PAGE 5 OF 6
COASTERFURNITURE.COM
CN
1
7
8
4
5
EN
6
7
2

PAGE 6 OF 6
COASTERFURNITURE.COMNote : Dimension tolerance ±5%
ITEM:2408