Coaster TETON 460120T User manual

MAS90: 5043-43220
7109TTW TWIN FRAME HARDWARE
QTY: DESCRIPTION:
81/4 X 4 HEX LAG BLK
83/16 USS FL WASHER BLK
10 6 X 1 1/4 PHIL FLAT PARTICLE BOARD SCREW
7030-00220 KIT

TETON TWIN/FULL
BOOKCASE BED
7030-00220
PARTS LIST;
A) 8 -4 1/4" Lag Bolts
B) 8 -Black Steel Washers
C) 1 -Headboard Assembly
D) 1 -Footboard Assembly
E) 2 -5" x 75" Mattress Rails w/Support Cleats
F) 3 -3 ½” x 38 ½”(Twin) or 53 ½”(Full) Mattress Supports
G) 10 -1 ¼” Wood Screws
TOOLS REQUIRED:
1) 7/16" Wrench or Socket Wrench
2) Phillips Head Screwdriver
NOTE: Tool recommended: Electric driver with 7/16” socket
ASSEMBLY INSTRUCTIONS:
NOTE:
Make sure you have all parts before beginning assembly. If you need a part, contact the dealer where you
purchased your bed.
1) Attach two mattress rails(E) to headboard assembly(C) and footboard assembly(D) with 8 lag bolts and 8
washers, and tighten.
2) Place 3 mattress supports on mattress rail support cleats, with one support in the center, and a
support pushed tightly against each end assembly.
3) Secure mattress supports with 6 wood screws.
4) Add the foundation and proper thickness mattress.(See dealer for details)
460120T
400839T
460120F
400839F

Installation of individual slats for use with Slat Roll (Slat roll sold separately) See your retailer for purchase of Slat Roll
SCREW
SCREW
SCREW
SCREW SCREW SCREW SCREW
SCREW
SCREW
SCREW
INDIVIDUAL SLATS INDIVIDUAL SLATS INDIVIDUAL SLATS
Installation of individual slats for use with Bunkie Board (Bunkie Board sold separately) See your retailer for purchase of Bunkie Board
SCREWSSCREWSSCREWSSCREWSSCREWSSCREWS
INDIVIDUAL SLATS INDIVIDUAL SLATS INDIVIDUAL SLATS
When used with a slat roll, the three
individual slats should be placed evenly in the gaps and underneath the strapping before fastening.
Individual Slat
Individual Slat
Individual Slat