Coaster 202263 User manual

www.coastercompany.com
202263
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
DRESSER
PAGE 1 OF 3 REVISION 0 : 06/12/2012

ITEM : 202263 ASSEMBLY INSTRUCTIONS
STEP 1 Lay down dresser on soft surface, align and screw in the support leg to the bottom of dresser. Adjust leveler to touch the floor.
www.coastercompany.com
PAGE 2 OF 3
1 PC
PARTS IDENTIFICATION
A 1 PCDRESSER B SUPPORT LEG

ITEM : 202263 ASSEMBLY INSTRUCTIONS
www.coastercompany.com
PAGE 3 OF 3
b acket sc ew hole app oximately 2"below the b acket mounted to the edge of the d esse
1.1 Attach one of the mounting b ackets secu ely to the back edge of the d esse .Use the sho t sc ew.
1.2 Dete mine whe e the d esse is to be placed and ma k location on the wall fo the mounting
1.3 D ill a 3/16" hole in the wall. P ess the plastic ancho into the hole and gently tap until the
flange on the ancho is against the wall su face.
1.5 Place the d esse so the b acket on the back edge is in line with the b acket on the wall.
1.6 Lace an end of the cable tie down th ough each b acket. B ing both ends togethe and slide
the beaded end of the cable tie th ough the keyhole shaped slot on the othe end until snug.
Pull down on the beaded end until it snap locks into the keyhole slot
1.7 To double lock etu n the beaded end back th ough the keyhole as shown.
1.8 Check to make su e the cable tie is secu ely laced and locked to the b ackets.
1.4 Position the b acket ove the ancho and use the long sc ew to secu ely attach the b acket
to the wall.
ANTI - TIPPING KIT