Coaster 722272 User manual

REVISION 0:05/31/2018
REVISION 1:05/14/2019
REVISION 2:10/29/2019
REVISION 3:01/05/2021
PAGE 1 OF 4 COASTERFURNITURE.COM
722272

ITEM:722272
ASSEMBLY
INSTRUCTION
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME PER UNIT
5 MINUTES
PAGE 2 OF 4
COASTERFURNITURE.COM

ITEM:722272
ASSEMBLY
INSTRUCTION
ATTENTION:Anti tipping safeguard
Please install the Anti tipping hardware
as shown in the drawing this can help to
prevent any tipping issues.
HARDWARE IDENTIFICATION
NO. DESCRIPTION FIGURE SIZE QTY
1 PLUG 2PC
2 LARGE SCREW Ø8×2" 1PC
3 TIGHTWIRE 280mm 1PC
4 SHORT SCREW Ø8×3/4" 1PC
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protection against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture may
result in injury and damage.
PAGE 3 OF 4
COASTERFURNITURE.COM

ITEM:722272
ASSEMBLY
INSTRUCTION
PRODUCT/PART DIMENSIONS:
①
W418mm*D356mm*H400mm/W16.5"*D14"*H15.75"(Storage cabinet Size)
②
W667mm*D356mm*H146mm/W26.25"*D14"*H5.75"(Open shelves Size)
③
W419mm*D292mm*H70mm/W16.5"*D11.5"*H2.75"(Drawers Internal Size)
Note:Dimension tolerance±5%
PAGE 4 OF 4
COASTERFURNITURE.COM