Coaster 959625 User manual

COASTERFURNITURE.COM
Fine Furniture for every stage of life
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
PAGE 1 OF 12
REVISION 0 : 12/29/2021
959625
ACCENT CABINET

959625
ITEM:
COASTERFURNITURE.COM
PAGE 2 OF 12
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIME
PARTS IDENTIFICATION
50 MINUTES
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
ALEFT SIDE
PANEL 1 PC
BRIGHT SIDE
PANEL 1 PC
CMIDDLE DIVIDER
PANEL 1 PC
DBOTTOM PANEL 1 PC
ETOP PANEL 1 PC
FBACK PANEL 2 PCS
GGLASS DOOR 2 PCS
HGLASS 4 PCS
ILEG FRAME 2 PCS
JUPPER
CROSSBAR 1 PC
KLOWER
CROSSBAR 1 PC

959625
ITEM:
COASTERFURNITURE.COM
PAGE 3 OF 12
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
HARDWARE IDENTIFICATION
Z
NO DESCRIPTION FIGURE Q’TY
1GLUE 15g 1 PC
2WOODEN DOWEL
Ø8x30mm 12 PCS
3CAM BOLT
Ø7x35.5mm SR 6 PCS
4CAM LOCK
Ø15x12mm SR 6 PCS
5SCREW
Ø4.5x42mm SR 6 PCS
6PIN Ø5x20.5mm SR 16 PCS
7HANDLE 2 PCS
8HANDLE BOLT
Ø4x25mm BLK 2 PCS
9HINGE
Ø35mm SR 4 PCS
NO DESCRIPTION FIGURE Q’TY
10 HINGE SCREW
Ø4x15mm SR 16 PCS
11 BOLT
M6x15mm BLK 8 PCS
12 BOLT
Ø7x32mm BLK 4 PCS
13 SCREW
Ø5x35mm BLK 2 PCS
14 FLOOR PROTECTOR
Ø20mm 4 PCS
15 ALLEN WRENCH
4mm SR 1 PC
16 FIXER 6 PCS
17 FIXER SCREW
Ø3x19mm SR 6 PCS
18 STICKER
Ø20mm 1 PC
Z9 not included in blister packaging.

959625
ITEM:
PAGE 4 OF 12 COASTERFURNITURE.COM
INCORRECT
CORRECT
x 12
STEP 1
Apply glue on all wooden dowels to
ensure integrity of the structure.
2
A
B
C
E
2
3
x 6
3

959625
ITEM:
PAGE 5 OF 12 COASTERFURNITURE.COM
STEP 2
Apply glue on all wooden dowels to
ensure integrity of the structure.
4
x 6 x 6
18
STEP 3
4
18
A
4E
A
B
C
F
F

959625
ITEM:
PAGE 6 OF 12 COASTERFURNITURE.COM
STEP 4
STEP 5
5
x 6
Apply glue on all wooden dowels to
ensure integrity of the structure.
5
A
D
I
I
x 4
12
x 4
14
15
12
14

959625
ITEM:
PAGE 7 OF 12 COASTERFURNITURE.COM
STEP 6
STEP 7
x 4
15
11
x 2
13
15
11
13
11
x 4
11
J
K

959625
ITEM:
PAGE 8 OF 12 COASTERFURNITURE.COM
STEP 8
STEP 9
x 16
6
6
HH
HH

959625
ITEM:
PAGE 9 OF 12 COASTERFURNITURE.COM
STEP 10
x 2
7
STEP 11
x 8
10
(A)
(C)
(B)
(A)
(B)
(C)
x 2
8
x 4
9
x 8
10
10
10
9
7
8
G
x 2
G
G

959625
ITEM:
PAGE 10 OF 12 COASTERFURNITURE.COM
STEP 12
STEP 13
COMPLETE
16
17
x 6
17
x 6
16
16
17

959625
ITEM:
PAGE 11 OF 12 COASTERFURNITURE.COM
Note : Dimension tolerance ±5%
300mm(15.28")
162mm(6.38")
838mm(32.99")
122mm(4.8")
160mm(6.3")
338mm(13.31")
267mm(10.51")
371mm(14.61")
426mm(16.77")
426mm(16.77")
380mm(14.96")
388mm(15.26")
900mm(35.43")
251mm(9.88")
1230mm(48.5")
415mm(16.25")
900mm(35.5")
100mm(3.94")

ANTI-TIPPING INSTALLMENT INSTRUCTIONS
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture
may result in injury and damage.
1. To attach the anti-tip strap, securely mount one end to the top of the case piece with
the 5/8” screw.
2. Position the case piece against the wall in the desired location.
3. Pull the anti-tip strap taut and mark the position of where you will secure the other end
on the wall.
4. Drill a 1-1/4” hole in the spot you marked.
5. Tap in plastic wall plug.
6. Fasten anti-tip strap with wall screw provided.
(Please install the anti-tiping kit in the middle of the case piece if only have one set of anti-tipping kit.)
WALL
PAGE 12 OF 12 COASTERFURNITURE.COM