
not supplied
1
873119-2014-V1
BEFORE YOU START
Produced in China for Next Retail Ltd.
Oak And Glass Round Dining Table
To View our full furniture range please visit www.next.co.uk
Time to assemble
LE19 4AT
Leicester,
Desford Road,
Next Retail Ltd,
Home Customer Services
You can write to us at
the product where possible and recommend further action.
an independant home service technician to review and repair
If you have had the product for more than 28 days we will send
home to assess the fault and repair the product where possible.
refund or for a fully trained home service technician to visit your
product for 28 days or less you may be offered a replacement,
to you free of charge.
Tools required
and they will be happy to arrange for a replacement to be sent
0333 777 8999
873119
Two persons are required to assemble this item.
1.5 hours
Assembly instructions
Number of people required to assemble
please contact our customer service team on
If you are missing any fixtures and fittings for your product
Missing parts
If you have had the
0333 777 8999.
customer service team on
If you have a fault with your product please contact our
Home service technicians
Warnings
We suggest you retain these instructions for future reference.
Keep fittings out of children’s reach and keep children well
away from construction area.
This product should only be used on firm, level ground.
Please periodically check all fittings and re-tighten as
necessary.
Please do not sit or stand on your table.
Avoid exposing the furniture to excessive heat or direct
sunlight as this can cause cracking of the wood and
deterioration of the colour.
Unwrap all packaging materials and place the components
on top of the carton box or on a clean floor to protect it from
damage
Do’s
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the
right tools and plenty of space.
Unwrap all packaging materials and place the components
on a clean surface to protect it from damage.
We recommend that the packaging is used to protect the
surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly.
Due to the size of the product we recommend that it is
assembled in the room intended for use.
Ensure the product is fully assembled as illustrated and all
fixings fully tightened before use.Check fixings regularly to
ensure they remain tight.
Wood will mellow and change colour over time, we recommend
that ornaments and items placed on the surface are moved
regularly for the first few months to prevent uneven mellowing.
When cleaning glass panels use a damp cloth with washing up
liquid or soft soap if necessary. Do not use washing powders or
any other substances containing abrasives since these
substances can scratch the glass.
The glass used in this product is toughened and complies with
BS EN 12150-1:2009
Don’ts
When moving furniture never drag the pieces across the floor,
as this will cause damage to the joints.
Apply Adhesive substrates for example, sticky tape to the product.
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the lacquer finish.
If the glass is chipped or broken, stop using the product and
consult Next.
Do not place very hot or very cold items on the glass surface, unless
adequately thick table mats are used to prevent such items from
coming into contact with the glass.
Do not use glass as a chopping surface. Do not strike the glass with hard
or pointed items.