Coaster Adabella 708539 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
708539
CONSOLE TABLE
REVISION 0:03/15/2022
REVISION 1:07/01/2022
PAGE 1 OF 5
COASTERFURNITURE.COM

ITEM:708539 (B1-B3)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 10 MINUTES
PARTS IDENTIFICATION
B1 ( BOX 1) B3 ( BOX 3)
A TOP 1PCS D LEG FRAME 2PCS
B2 ( BOX 2)
B TOP FRAME 1PCS
C BASE 1PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 2 OF 5 COASTERFURNITURE.COM

ITEM:708539 (B1-B3)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B3 (BOX 3) - HARDWARE PACK IS LOCATED IN 708539 (B3)
1 ALLEN WRENCH 1PCS
2SHORT BOLT
(M8*50mm) 12PCS
3 FLAT WASHER D20*2 12PCS
4 FRAME REST 6PCS
Hardware pack is located in 708539 B3
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 3 OF 5 COASTERFURNITURE.COM

ITEM:708539 (B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
STEP 3
STEP 4
PAGE 4 OF 5 COASTERFURNITURE.COM
B: TOP FRAME
D: LEG FRAME
C: BASE
A:TOP
4

ITEM:708539 (B1-B3)
Note : Dimension tolerance ±5%
PAGE 5 OF 5 COASTERFURNITURE.COM