Coaster California 224441KW B1 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for very stage of life
California King Bed
224441KW(B1-B3)
REVISION 0: 05/10/2023
COASTERFURNITURE.COM
PAGE 1 OF 5

ASSEMBLY TIPS:
1.Remove hardware from box and sort by size.
2.Please check to see that all hardware and parts are present prior to start of assembly.
3.Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1.Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2.This product is for home use only and not intended for commercial establishments.
ITEM: 224441KW(B1-B3)
COASTERFURNITURE.COM
25 MINUTES
ASSEMBLY TIME
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
ASSEMBLY INSTRUCTIONS
PAGE 2 OF 5
B1 (BOX 1)
A1PC B1PC
C1PC
B2 (BOX 2)
EFOOTBOARD 1PC
B3 (BOX 3)
2PCS
F
HB 1PC
PARTS IDENTIFICATION
8PCS
G
RIGHT
HEADBOAR LEG
HEADBOAR PANEL HEADBOARD BOTTOM RAIL
BED RAIL BED SLAT SUPPORT
WITH LEVELER
224441KW (B1)
FROM BOX 1
HEADBOARD
COMPLETE
NOTE:
HBED SLAT 4PCS
D1PC
FB 224441KW (B2)
FROM BOX 2
FOOTBOARD
LEFT
HEADBOAR LEG
1PC

ASSEMBLY TIPS:
ITEM: 224441KW(B1-B3)
COASTERFURNITURE.COM
ASSEMBLY INSTRUCTIONS
1.Remove hardware from box and sort by size.
2.Please check to see that all hardware and parts are present prior to start of assembly.
3.Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1.Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2.This product is for home use only and not intended for commercial establishments.
PAGE 3 OF 5
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
1
(Ø5/16" x 60MM-BLK) 6PCS 4
2 5 1PC
(Ø5/16" x 90MM - RBW)
(Ø5/16" x 12MM - RBW)
WRENCH
(14MM - RBW)
FLAT HEAD SCREW
( 4 x 30MM - RBW)
HARDWARE IDENTIFICATION
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 224441KW (B1)
LONG BOLT
3
10PCS
(Ø5/16" x 45MM-BLK)
SHORT BOLT
4PCS
(Ø5/16" - BLK)
(Ø5/16" - BLK)
LOCK WASHER
ALLEN WRENCH
(5MM- BLK)
FLAT WASHER
Z-B3 (BOX 3) - HARDWARE PACK IS LOCATED IN 224441KW (B3)
688PCS
7 9
THREADED BOLT 8PCS
8PCS
HEX NUT 1PC
10PCS

COASTERFURNITURE.COM
ITEM: 224441KW(B1-B3)
ASSEMBLY INSTRUCTIONS
PAGE
4
OF 5
STEP 1
HB
C
F
6
9
7
B
C
B
A
C
A
C
5134
D
5
23
4
STEP 2
FB

COASTERFURNITURE.COM
ITEM: 224441KW(B1-B3)
ASSEMBLY INSTRUCTIONS
PAGE 5 OF 5
STEP 3
STEP 4
F
8
H
H
G
GH
H
COMPLETE

COASTERFURNITURE.COM
ITEM: 224441KW(B1-B3)
Note: Dimension tolerance ±5%
Inner Size : 85.00''W X 77.00"D
82.00"
68.00"
61.50"
79.75"
98.25''
4.00"
74.75"
85.25"
22.00"
77.00"
6.75"
77.00"
6.25"