Coaster Felicity 203504LED User manual
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
203504
LED
Led Mirror
REVISION 0 : 09/15/2020
PAGE 1 OF 4
COASTERFURNITURE.COM
ITEM:
203504LED
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
C 2PCS
D 1PC
HARDWARE IDENTIFICATION
1 10PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PARTS IDENTIFICATION
10 MINUTES
B 1PC
DRESSER
FROM BOX ITEM # 203503
PAGE 2 OF 4
A MIRROR 1PC
FLAT HEAD SCREW
(M4 x 32mm - RBW)
MIRROR SUPPORT
(PACK WITH DRESSER)
ADAPTER PLUG
ITEM:
203504LED
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
COASTERFURNITURE.COM
PAGE 3 OF 4
**BACK VIEW
B
C
A
C
B
Arrow mark
must be in line
1
A
ITEM:
203504LED
ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
COASTERFURNITURE.COM
PAGE 4 OF 4
COMPLETE
C
1
Arrow Marking
Must Be Aligned
PLEASE REMOVE THE
PROCTECTIVE FILM
BEFORE USE
A
ON & OFF
TOUCH SWITCH
D
ITEM:
203504LED
COASTERFURNITURE.COM
Note : Dimension tolerence ± 5%
1.38"
37.20"
46.06"
26.57"
34.65"
