Cobra CBTH1-PLUS User manual

Bluetooth®Headset User Guide
CBTH1-PLUS

1
Index
1. Introduction
2. Package List
3. Product Illustration
4. Charging the Headset
5. Power On/ Off
6. Pairing the Headset (or any Bluetooth®wireless device)
7. Wearing the Headset
8. Answering Incoming Calls
9. Refusing Incoming Calls
10. Ending Calls
11. Voice Dialing
12. Redialing
13. Transferring Calls Between Handset and Headset
14. Placing Calls On Hold
15. 3 Way Conference Calling
16. Adjusting the Volume
17. Safety Instruction
18.Specications
19. Trouble Shooting
20. Headset Care
21. Q & A
22. Declaration of Conformity
23. Limited Warranty

2
1. Notice before using
Thank you for purchasing the Cobra Bluetooth®Over the
Head Headset CBTH1-PLUS. Your Cobra CBTH1-PLUS is a
Bluetooth®wireless technology device that enables a cable
free connection between your Bluetooth®wireless technology
headset and Bluetooth®wireless technology enabled handset.
2. Package List
Please inspect your packaging contents and refer to the
packagelistbelowtoconrmthatthereisnoshortagesor
defects. The packaging contents includes the following items:
► CBTH1-PLUSBluetooth®Wireless Headset....1
► UserGuide.........................................................1
► WarrantyCard....................................................1
► USBCable.........................................................1
► VehicleCharger................................................1
Ifyoundanyshortageordefect,pleasecontactyourretailer
where you purchased your Bluetooth®wireless techonology
headset.

3
3. Product Illustration
1. Multi-Function Button (Answer/End/On/Off)
2. Volume Up (+)
3. Indicator Light
4. Voume Down (-)
5. Charging Jack Port
6. Speaker (Receiver)
7. Microphone

4
4. Charging the Headset
CBTH1-PLUS includes a rechargeable built-in Lithium
Polymerbattery.IMPORTANT:Forrsttimeuse,chargethe
headset for at least 4 hours before pairing.
1.Insert the USB charging cable into the charging jack port
located at the bottom of the headset.
2.Plug other end of USB charging cable into the vehicle charger.
3.Plug vehicle charger into a working cigarette outlet.
5.When charging is complete (90-120 minutes)
NOTE:
●Donotattempttouseheadsetwhilecharging
●OnlyusethesuppliedchargersororiginalCobraproductsto
charge the headset
●Whenheadsetbatterychargeislow,theindicatorlightwill
ashred.
●Donotchargetheheadsetformorethan24hours
●Rechargeheadsetonlywithinatemperaturerangeof14oF to
113oF
5. Power On/Off
1.Topoweron,pressandholdthemulti-functionbuttonfor4+
seconds,thepowerwillturnonaftertheindicatorashesa
bluelight3times(thebluelightwillcontinouslyashevery
3 seconds).
2.Topoweroff,pressandholdthemulti-functionbuttonfor

5
4+ seconds until you hear 3 beeps and you see the indicator
ashred3times.
6. Pairing the Headset
IMPORTANT: Your Cobra Bluetooth®headset and your
Bluetooth® wireless technology enabled phone or other
Bluetooth®wirelesstechnologydevice,mustbe“paired”
togetherbeforersttimeuse.
1.EnsuretheHeadsetisoff(noashingindicatorlight).
2.Press and hold the multi function button for 5 seconds until
theindicatorlightalternatesblueandredashes(alternating
light indicates that headset is in pairing mode).
3.Ensure your mobile phone has the Bluetooth®wireless
technology function and start the Bluetooth®wireless
technology new device searching function. Please follow the
instructions of your mobile phone to proceed the operation.
4. Activate the Bluetooth®“discovery”functioninthemobile
phone or other Bluetooth®device. Example: Menu/
Bluetooth®/addnewdevice.(Seephonemanualforspecic
Bluetooth®wireless technology pairing instructions.)
6.When Bluetooth®wireless headset is recognized by your
phone,“CBTH1-PLUS”willappearinthelistoffound
devices.
7.Scrolltoselectorhighlight“CBTH1-PLUS”andpressOK
8.Youwillbepromptedtoentertheheadsetpassword“0000”
pressOK

6
135 135
9.Ifpairingissuccessful,yourheadset’sindicatorwillash
blue.Ifpairingisnotsuccessful,repeatthepairingprocess
starting at step 1
10.Certainphonemodelsmayrequireyoutopress“connect”
or“addtotrusteddevices”(Seephonemanualforspecic
Bluetooth®wireless technology pairing instructions)
11. Your headset is now paired and ready to use.
NOTE:
●Recommendeddistancebetweenphoneandheadsetduring
pairing is 1-3 feet
●Ifheadsetisnotsuccessfullypairedwithin2minutes,itwill
automatically abandon pairing mode and revert to standby
mode
7. Wearing the Headset
Accordingtoyourpreference,adjusttheheadsetonyourleft
or right ear.

7
8. Answering Incoming Calls
IMPORTANT: The working range of the Bluetooth®Wireless
Headset is 16 feet indoors and 16 - 32 feet outdoors.
1. Wait for Headset to ring and then press the multi-function
button to answer incoming call.
NOTE:
●IfBluetooth®WirelessHeadsetisoff,Bluetooth®wireless
technology calls must be answer through handset.
9. Refusing Incoming Calls
(ForHandsfreeprolephones)Pressandholdmulti-function
button for 2-3 seconds until beep sound is heard.
(ForHeadsetprolephones)Callrejectmustdoneusingthe
phone(Seespecicphoneownersmanual).
10. Ending calls
1.Whentheconversationisover,pressthemulti-function
button to end the call.
11. Voice dialing
IMPORTANT: Your mobile phone and carrier must support
this feature and or it must be activated to work properly.
1. Press the multi-function button for less than 1 second on the
Headset to activate voice dialing and follow your mobile
phone instructions to proceed with the voice dialing.
12. Redialing

8
1. Press the multi-function button on the Headset for 2~3
seconds until you hear a beep sound to redial the last call.
13. Transferring Calls Between Headset and Handset
1.Totransfercalltophone,pressthevolumeincrease(+)
buttonfor2~3secondsuntilyouhearonebeepsound,then
the call will be transferred to your mobile phone.
2. To transfer call to Bluetooth®Headset,seeyourphone’s
manualforspecialphonesspecicinstructions.
Note:
●YourmobilephonemustsupporttheHandsfreeprole.For
moredetails,pleasecheckthemanualofyourmobilephone.
14. Placing Calls On Hold
IMPORTANT: Your mobile phone and carrier must support
this feature and/or it must be activated to work properly.
1. Press the volume decrease (-) button for 2~3 seconds until
youhearonebeepsound,thenthecallwillbeplacedon
hold. The Headset automatically answers a second incoming
call.
2.Totakeacalloffofhold,pressthevolumedecrease(-)
button for 2~3 seconds until you hear one beep sound.
NOTE: