Cochlear CP900 Series User manual

Cochlear™ Wireless Mini Microphone
Quick guide for CP900 Series users
Features of your Cochlear Wireless Mini Microphone
Hear better over a distance and in noisy
listening situations, such as:
How to:
Hear the TV or radio when you are away from home Stream music or audio directly to your Sound Processor
How to: How to:
in meetings
when travelling by car, bus or train
dining at a restaurant
participating in a class at the gym
Give the Mini Microphone to the person you want to listen to and
ask them to position it close to their mouth by placing it on their
clothing using the clip on the back. Then activate streaming on your
CP900 Series Sound Processor (see instructions below).
If you are away from
home, you can place the
Mini Microphone by the
TV speaker or radio. No
need to plug it into a Head
Phone outlet.
Insert one end of the
supplied jack cable into the
Mini Microphone’s Line-in
socket and the other end into
the audio out of your audio
device, such as a computer,
MP3 player or hi-fi.
To audio
device
Getting Started
Product overview
Mini-USB connector
for charging
Line-input
Power
switch
Microphone
inlet
Light indicator (LED)
Charging the battery
Plug one end of the included mini-
USB charging cable into the Mini
Microphone and the other into a
computer, or into a power outlet via
the supplied adapter.
Before you use your Mini Microphone
you should allow it to charge for at
least 3 hours, even if the indicator light
shows a full charge. The battery cannot
be overcharged.
Note: On average, the Mini Microphone
will operate for up to 8.5 hours between
charges.
Up to
7 metres
Mini Microphone Sound Processor
10-30cm between mouth
and microphone
ON
Clip
Volume
control
532743-2.02_N6_Wireless_Mini_Microphone_Quick_Guide_SC.indd 1 1/07/2014 1:31:18 PM

Cochlear™ Wireless Mini Microphone
Quick guide for CP900 Series users
Pairing with your CP900 Series Sound Processor
F
ASwitch off your CP900 Series Sound Processor.
While pairing mode is active (20 seconds), switch on your Sound
Processor.
You can pair up to three Cochlear wireless accessories with your
Sound Processor(s).
To pair a Mini Microphone in channel 2 press the pairing button
twice in step C. The LED will flash yellow twice every 2 seconds.
To pair a Mini Microphone in channel 3 press the pairing button 3
times in step C. The LED will flash yellow 3 times every 2 seconds.
E
BSwitch on your Mini Microphone and remove the silver cap.
Press the pairing button on the Mini Microphone once using the tip
of a pen or similar object.
C D The LED will flash yellow every 2 seconds and the Mini Microphone
will now be in pairing mode for 20 seconds.
Remove the Sound
Processor from your ear.
Press and hold the lower
button for two seconds.
Switch on
Remove cap
Press the lower button.
A blue indicator light flashes to show
that pairing has been successful.
Support
For full details about the Cochlear Wireless Mini Microphone, please refer to the User Guide that was packaged with your Mini Microphone, and the
Wireless Accessories User Guide.
For full details about your Cochlear CP900 Series Sound Processor, please refer to its User Guide.
For further support and videos, visit the Cochlear website: www.cochlear.com
532743-2.02_N6_Wireless_Mini_Microphone_Quick_Guide_SC.indd 2 1/07/2014 1:31:23 PM

Cochlear™ Wireless Mini Microphone
Quick guide for CP900 Series users
ACE, Advance Off-Stylet, AOS, AutoNRT, Autosensitivity, Beam, Button, Carina, Clinicnet, Cochlear, コクレ ア, Codacs, Contour, Contour Advance, Custom Sound, ESPrit, Freedom, Hear now. And always, Hybrid, inHear, Invisible
Hearing, MET, MP3000, myCochlear, NRT, Nucleus, Nucleus in Chinese characters, Off-Stylet, SmartSound, Softip, SPrint, the elliptical logo and Whisper are either trademarks or registered trademarks of Cochlear Limited.
Ardium, Baha, Baha Divino, Baha Intenso, Baha PureSound, Baha SoftWear, DermaLock, Vistafix and WindShield are either trademarks or registered trademarks of Cochlear Bone Anchored Solutions AB. Bluetooth is a registered
trademark of Bluetooth SIG. © Cochlear Limited 2014
532743 ISS2 JUN14
Using your Cochlear Wireless Mini Microphone
Cochlear Wireless Accessories:
Cochlear Bone Anchored Solutions AB Konstruktionsvägen 14, SE - 435 33 Mölnlycke, Sweden
Tel: [phone] Fax: [phone]
Nucleus 6 System:
Cochlear Ltd (ABN 96 002 618 073) 1 University Avenue, Macquarie University, NSW 2109, Australia
Tel: [phone] Fax: [phone]
Cochlear Ltd (ABN 96 002 618 073) 14 Mars Road, Lane Cove, NSW 2066, Australia
Tel: [phone] Fax: [phone]
Regional Offices:
Cochlear Americas 13059 E Peakview Avenue, Centennial, CO 80111, USA
Tel: [phone] Fax: [phone]
Cochlear Deutschland GmbH & Co. KG Karl-Wiechert-Allee 76A, 30625 Hannover, Germany
Tel: [phone] Fax: [phone]
株式会社日本コクレア（Nihon Cochlear Co Ltd）〒 113-0033 東京都文京区本郷2-3-7 お茶の水元町ビル
Tel: [phone] Fax: [phone]
www.cochlear.com
Start streaming using your sound processor
From the Home screen, press the right arrow
button until you see the Stream screen.
Scroll down the list to the channel
you want to use and press OK.
When your audio device is turned on,
audio will start streaming through
the Mini Microphone.
To stop streaming, select Off on the Stream
selection screen.
Start streaming using your CR230 Remote Assistant
Long-press the upper button on your
sound processor once.
The sound processor flashes a blue light
to indicate audio is streaming.
Long-press the Telecoil button.
Tip! Long press the button a second
time to select Channel 2, and again for
Channel 3.
Audio will start streaming through
the Mini Microphone.
To stop streaming, short-press the
Telecoil button.
Long-press the Telecoil button.
Audio will start streaming through the
Mini Microphone.
ATurn on your sound processor and Mini Microphone.
Long press the upper button a
second time to select Channel 2,
and again for Channel 3.
To stop streaming, short-press the
upper button.
Method 1: Turn on your sound processor and Mini Microphone. Turn
on your CR230 Remote Assistant.
BTo select another channel or stop streaming.
Method 2: Turn on your sound processor and Mini Microphone. Turn
on your CR230 Remote Assistant.
Start streaming using your CR210 Remote Control
Long press the Telecoil button a
second time to select Channel 2,
and again for Channel 3.
To stop streaming, short-press the
Telecoil button.
ATurn on your sound processor and Mini Microphone. Turn on your
CR210 Remote Control. BTo select another channel or stop streaming.
OR
532743-2.02_N6_Wireless_Mini_Microphone_Quick_Guide_SC.indd 3 1/07/2014 1:31:27 PM