Code Alarm GUARDIAN CPL 100 User manual

1
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY
PRECAUTIONS may not apply. Please see your installing dealer for more information.
CPL 100
Owner's Manual
Keyless Entry Upgrade
Security System
BY

2
Table of Contents
Features and Benefits............................................................... 3
System Functions ...................................................................... 4
Arming the system
Pre-arm mode
Disarming the system
Using valet mode
When Your Security System is Triggered ............................... 4
When Your Security System is Triggered, Continued ............ 5
Attempted Intrusion identification
Emergency Disarm Procedure................................................. 5
Basic Troubleshooting .............................................................. 5
Warranty .................................................................................... 6

3
Features and Benefits
Two Easy-to-Use Weather-Resistant Remote Controls
The upgrade security system utilizes your factory keyless entry remote controls and adds a complete
vehicle security system while retaining factory functions.
All Entrances Protected
Opening any door or entrance protected by the security system triggers the vehicle’s horn and flashes the
parking lights.
Starter Disable
The CPL Security System protects your vehicle from theft by disabling the starter when the system is
armed.
Interior Theft Sensor
This sensor guards against vehicle body damage, theft of vehicle equipment (such as air bags), and
personal belongings inside the vehicle.
Interior Status Indicator
The bright-red warning light is an effective visual deterrent to a would-be thief.
IMPORTANT NOTE: The operation of the CPL Security System as described in this manual is applicable to most
vehicles. However, due to the engine type and configuration of some vehicles, some functions AND/OR SAFETY
PRECAUTIONS may not apply. Please see your installing dealer for more information.

4
System Functions
Arming the Security System
To arm the system, exit the vehicle, close all doors, then press the LOCK button on your keyless entry
remote control. The system will flash the parking lights 2 times, indicating the system is armed, and
activated the starter disable feature. The status indicator (red warning light) will blink steadily, once per
second.
Pre-arm Mode
If the system sounds 1 time and the parking lights flash only 1 time, this indicates that the vehicle’s
interior light is on or an entrance is left open. Check to see that all doors hood and trunk are closed
properly. Once all entrances are secured (and the interior light is off), this system will sound/flash
again. The system is now fully armed. (If the entrance is not secured within 4 minutes, the system will
arm and ignore the unsecured entrance until it is closed.)
Disarming the Security System
To disarm the system press the UNLOCK button. The system will flash the parking lights 1 time.
Using Valet Mode
To engage valet mode:
1. Turn the ignition key ON/OFF, ON/OFF, ON/OFF.
2. The red LED will flash 2 times quickly then pause indicating that the system is in
valet mode.
When valet mode is activated all security functions will be disabled.
To disengage valet mode:
1. Turn the ignition key ON/OFF, ON/OFF, ON/OFF.
2. The red LED will turn off indicating that the system has exited valet mode.
When Your Security System is Triggered
The CPL Security System will trigger if one of the following events occurs while the system is armed:
•Any protected entrance is opened.
•The vehicle ignition is turned on.
•The vehicle is jolted hard enough to signal the impact sensor.
Once the alarm is triggered, the horn will sound and the vehicles parking lights will flash for 30 seconds.
The system will then re-arm, awaiting the next intrusion attempt.

5
When Your Security System is Triggered, Continued
Attempted Intrusion Identification
Pressing UNLOCK after a full 30 second trigger cycle has completed, the horn will honk 4 times and the
LED will flash a number of times to indicate which input triggered the alarm. Turning on the ignition or
pressing the valet/override button will reset the LED flashes, pressing the valet/override button will also
honk the horn to match the LED flashes before it resets.
Number of flashes:
1 - Interior Theft Sensor (Shock Sensor)
2 - Door Input
4 - Hood/Trunk input
5 - Ignition
Emergency Disarm Procedure
If your remote control is lost or fails to function, use this procedure to disarm the CPL Security System
and start your vehicle.
1 - Use the keys to enter the vehicle. The alarm will sound once the door is opened.
2 - Insert the key into the ignition and turn to the ON position.
3 - Locate and press the emergency override button. The alarm will turn off and then you will be
able to start the vehicle.
Your Emergency Override Button is Located:
_________________________________________
Basic Trouble Shooting
Symptom Problem Solution
Remote does not work: Weak or dead battery. Change battery.
System will not arm: Door or entrance is open. Close entrance.
Courtesy light is on. Turn courtesy light off.
System is in Valet mode. Exit Valet mode.

6
CodeSystems, Inc.
36Month Limited Warranty
Code Systems, Inc. (the “Company”) warrants to the original purchaser of this product that should this
productoranypartthereof, under normaluse and conditions,be proven defectivein material orworkman-
shipwithin36 months from thedateof original purchase,suchdefect(s) will be repairedorreplaced with
neworreconditioned product, (atthe Company’soption)withoutcharge for partsor repairlabor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof
ofwarranty coverage (e.g.dated bill ofsale),authorization number,specificationof defect(s),transportation
prepaid,toan approved warrantystation. This Warranty isnottransferable.
This Warranty does not cover damage to the vehicle’s electrical system or costs incurred for the installa-
tion or reinstallation of the product. This Warranty does not cover batteries nor apply to any product or
partthereofwhich,in the opinionof the Company, hassufferedorbeen damagedthroughalteration,
improperinstallation,mishandling, misuse, abuse,neglect,accident, or by removalor defacement of the
factoryserial number/bar codelabel(s).
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, IN-
CLUDINGANYIMPLIEDWARRANTYOF MERCHANTABILITY,SHALLBELIMITEDTOTHE DURATION
OFTHISWRITTENWARRANTY. ANYACTIONFOR BREACHOFANY WARRANTYHEREUNDER
INCLUDINGANYIMPLIEDWARRANTYOFMERCHANTABILITYMUSTBE BROUGHTWITHINAPE-
RIODOF24 MONTHSFROMDATE OFORIGINALPURCHASE. IN NOCASESHALLTHECOMPANY
BELIABLE FORANYCONSEQUENTIALOR INCIDENTALDAMAGES FORBREACH OFTHIS ORANAY
OTHERWARRANTY. Noperson or representativeis authorized toassumefor the Companyany liability
other than expressed herein in connection with the sale of this product.
TheCompany does notwarrantthat thisproductcannot becompromisedor circumvented. THEEXTENT
OFTHECOMPANY’S LIABILITYUNDERTHISWARRANTYISLIMIEDTOTHEREPAIR ORREPLACE-
MENTPROVIDEDABOVEAND, INNOEVENT, SHALLTHE COMPANY’SLIABIILTYEXCEEDTHE
PURCHASEPRICE PAIDBYPURCHASERFORTHE PRODUCTWITHOUTCOSTOFINSTALLATION.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of
incidental or consequential damage so the above limitations or exclusions may not apply to you. This
Warranty gives you specific legal rights and you may also have other rights which vary from state to state.
CodeSystems, Inc., 525Minnesota Drive,Troy, Michigan 48083– 1-800-421-3209

7

8
FCC COMPLIANCE
This device complies with Part 15 of the FCC rules and with RSS-210 of Industry
Canada. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including any interference that
may cause undesired operation.
Warning!
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Code Systems, Inc.
Customer Service 1-800-421-3209
WWW.CODE-ALARM.COM