Code Code Reader CR3500 User manual

Code Reader™ 3500 (CR3500) - Wireless
Quickstart Guide
C004419_03_CR3500_Quickstart_Wireless
Included with your Wireless CR3500
Depending on the reader conguraon ordered, you will have received one of the
following with your CR3500:
Baery Cartridge Baery Handle
Installing a Baery Cartridge
1. To install a baery, place the plasc tab on the boom
of the baery cartridge into the slot on the reader.
Slide the locking mechanism up, and press the baery
into place. Slide the locking mechanism down to
secure the baery.
2. To detach a baery, slide the locking mechanism on
the reader up and pull the baery cartridge up and
away from the slot on the reader.
Note: Baery ships with approximately 50% baery life. Fully charge baery before use.
Approximate charge me is 4 hours when baery depleted.
CR3500’s unique targeng funcon uses two converging
targeng LEDs to guide the user to opmal reading range.
Reading Tips
Quick Tips
1. Press either trigger buon to turn the reader
on, or to scan a bar code.
2. Press the So Key, under ‘Opons’ to:
manually enter data, view stored data,
connect to a Bluetooth device, send all stored
data to a PC, and change reader sengs.
3. Use the arrow buons to navigate through
lists, data and more.
4. Use the Enter buon to select an item.
Visit www.codecorp.com to download the CR3500
User Manual for a complete reference guide of CR3500
funcons.
The reader is too far from a
bar code (more than 12”
from the bar code reader).
The reader is too close to a
bar code (less than 1”
from the bar code reader).
The opmal distance to read
most bar codes is 3-4” away
from the bar code reader.
© 2012. Code Corporaon. All Rights Reserved.
4

3. Scan the newly created QuickConnect code, and then
scan the Save Sengs code (M188_02).
4. Next, a Serial Applicaon must be opened to transmit data from the CR3500 to the PC.
Visit www.codecorp.com/downloads.php and download/install CodeXML® Router,
CortexTools™ or open a HyperTerminal. Once installed, select the COM Port of your
reader (see step 2) to complete the wireless setup.
Installing a Baery Handle
1. To aach a Baery Handle, insert the tab on the back
of the Baery Handle into the reader’s recessed slot.
2. Press the reader down, towards the handle to snap
into place. Oponally, the reader can be further
secured to the handle with two threaded screws on
the underside of the reader and handle (screws are
included with Baery Handles).
3. To detach a Baery Handle, slide the locking mecha-
nism on the reader up and pull the baery handle up
and away from the slot on the reader.
CR3500 Wireless Setup
Establishing a Bluetooth Connecon with a non-Code Bluetooth Adapter:
1. Visit hp://www.codecorp.com/bdaddr.php and follow the instrucons to create and
print a QuickConnect Code that is specic to your adapter.
2. Plug the adapter into the USB port on your computer, and follow the installaon
instrucons included with your adapter. Make note of the COM Port assigned to the
adapter (e.g. COM 11).
Note: Detailed instrucons, including screen shots, on connecng a CR3500 to
non-Code Bluetooth devices can be found in the CR3500 User Manual available at
www.codecorp.com.
Powering On a CR3500
To power on a CR3500, press and hold either
trigger buon for approximately one second.
To establish a Bluetooth connecon via Code’s CodeXML® M3 Modem, please refer to the
CodeXML® M3 Modem QuickStart Guide, available at www.codecorp.com. The default seng on the CR3500 has Sux Enter disabled. To enable the Sux Enter for
USB and Carriage Return/Line Feed for RS232 scan the conguraon code, followed by the
Save Sengs (M188_02) bar code above:
CR3500 Default Sengs
Codabar
Codablock F
Code 11
Code 39
Code 39 Short Margin
Int 2 of 5
PDF417
Telepen
UPC
UPC Short Margin
UPC-E Expansion
Code 39 Triopc
Code 93
Code 128
Code 128 Short Margin
Data Matrix
The CR3500, out of the box, will read the following bar codes:
To congure a CR3500 to read bar codes not listed, please download the CR3500 User Manual
from www.codecorp.com and scan the appropriate ‘Enable’ bar code reading symbology
conguraon code.
Sux Enter Conguraon
Enable Sux Enter - USB Enable Carriage Return/Line Feed - RS232
For more conguraon opons, including disabling the Sux Enter conguraon, download the
CR3500 User Manual from www.codecorp.com.
23