Code 2600 User manual

C007995_05_CR2600_CongurationGuide

Code Reader™ 2600

Conguration Guide

C007995_05_CR2600_CongurationGuide

Modem Settings (for use with the Charging Station with an Embedded CodeXML® Modem or the external CodeXML® M3 Modem when paired

with a CR2600)

Modem ID and Firmware Version....................................................................................................................................................................................5 (A2)

USB Keyboard Communication Mode - Default ..............................................................................................................................................................5 (A3)

USB HID POS (Terminal 1D 131)....................................................................................................................................................................................5 (A4)

RS232 Communication Mode (Applicable for the CodeXML® M3 Modem Only) ...........................................................................................................5 (B1)

RS232 9600 Baud Rate (applicable for the CodeXML® M3 Modem Only).....................................................................................................................5 (B2)

RS232 19200 Baud Rate (applicable for the CodeXML® M3 Modem Only)...................................................................................................................5 (B3)

RS232 38400 Baud Rate (applicable for the CodeXML® M3 Modem Only)...................................................................................................................5 (B4)

RS232 57600 Baud Rate (applicable for the CodeXML® M3 Modem Only).................................................................................................................. 5 (C1)

RS232 115200 Baud Rate - Default (applicable for the CodeXML® M3 Modem Only) ................................................................................................. 5 (C2)

US English Keyboard Mapping - Leading 0 ................................................................................................................................................................... 5 (C3)

Keyboard Control Characters for Non Printable ASCII .................................................................................................................................................. 5 (C4)

USB Keyboard Mode No Leading 0 - Default................................................................................................................................................................. 5 (D1)

Universal Keyboard Mapping ......................................................................................................................................................................................... 5 (D2)

French Keyboard............................................................................................................................................................................................................ 5 (D3)

German Keyboard .......................................................................................................................................................................................................... 5 (D4)

Japanese Keyboard.........................................................................................................................................................................................................5 (E1)

Enable Preemptive Mode ................................................................................................................................................................................................5 (E1)

Disable Preemptive Mode - Default.................................................................................................................................................................................5 (E3)

Enable Reader Paging - Default......................................................................................................................................................................................5 (E4)

Disable Reader Paging................................................................................................................................................................................................... 5 (F1)

CR2600 Reader Settings

Reader ID and Firmware Version ....................................................................................................................................................................................5 (F2)

Reset, Clear and Save Reader Settings

Reset Reader to RF Factory Defaults ............................................................................................................................................................................6 (A1)

Clear All Stored Data and Images and Reboot ............................................................................................................................................................. 6 (A2)

Clear all JavaScript Rules.............................................................................................................................................................................................. 6 (A3)

Save All Reader Settings............................................................................................................................................................................................... 6 (A4)

Reader Text Settings

Reader Text Commands On ...........................................................................................................................................................................................6 (B1)

Reader Text Commands Off - Default ........................................................................................................................................................................... 6 (B2)

Communication Setting

USB Downloader Mode...................................................................................................................................................................................................6 (B3)

Batch Mode Settings

USB Keyboard Mode (Batch Mode Only)........................................................................................................................................................................6 (B4)

USB Virtual COM - 1 Way Mode (Batch Mode Only) ..................................................................................................................................................... 6 (C1)

Batch Mode Enable - Send and Log...............................................................................................................................................................................6 (C2)

Batch Mode Disable - Default.........................................................................................................................................................................................6 (C3)

Batch Mode Enable - Log Only.......................................................................................................................................................................................6 (C4)

Enable Alternative Operating System (Windows CE/MAC/Linux) - Batch Mode Only ................................................................................................... 6 (D2)

Disable Alternative Operating System - Batch Mode Only - Default............................................................................................................................... 6 (D3)

USB Speed - High Speed (Batch Mode only) - Default..................................................................................................................................................6 (D4)

USB Speed - Full Speed (Batch Mode only) .................................................................................................................................................................. 6 (E1)

Image Settings

Read Both Wide and High Density Field - Default...........................................................................................................................................................6 (E2)

Table of Contents

C007995_05_CR2600_CongurationGuide

Read Wide Field Only......................................................................................................................................................................................................6 (E3)

Read High Density Field Only .........................................................................................................................................................................................6 (E4)

Targeting Settings

Targeting On - Default .....................................................................................................................................................................................................6 (F1)

Targeting Off....................................................................................................................................................................................................................6 (F2)

Continuous Trigger Optimization and Settings

Continuous Scan On .......................................................................................................................................................................................................6 (F3)

Continuous Scan Off - Default.........................................................................................................................................................................................6 (F4)

Scan Delay

Duplicate Scan Disabled - Default.................................................................................................................................................................................. 7 (A1)

1 sec Duplicate Scan Delay............................................................................................................................................................................................ 7 (A2)

2 sec Duplicate Scan Delay............................................................................................................................................................................................ 7 (A3)

3 sec Duplicate Scan Delay............................................................................................................................................................................................ 7 (A3)

5 sec Duplicate Scan Delay............................................................................................................................................................................................ 7 (B1)

10 sec Duplicate Scan Delay.......................................................................................................................................................................................... 7 (B2)

30 sec Duplicate Scan Delay.......................................................................................................................................................................................... 7 (B3)

1 hour Duplicate Scan Delay.......................................................................................................................................................................................... 7 (B4)

1 day Duplicate Scan Delay ........................................................................................................................................................................................... 7 (C1)

Prex/Sufx Settings

Prex - AIM IDs On........................................................................................................................................................................................................ 7 (D1)

Prex - AIM IDs Off - Default............................................................................................................................................................. ............................. 7 (D2)

Prex - Comma...............................................................................................................................................................................................................7 (D3)

Prex - Space.................................................................................................................................................................................................................7 (D4)

Prex - Tab (USB Keyboard Mode ONLY)...................................................................................................................................................................... 7 (E1)

Prex - Erase/None - Default.......................................................................................................................................................................................... 7 (E2)

Sufx - Comma............................................................................................................................................................................................................... 7 (E3)

Sufx - Space ................................................................................................................................................................................................................. 7 (E4)

Sufx - Enter (USB Keyboard Mode ONLY)................................................................................................................................................................... 7 (F1)

Sufx - Tab (USB Keyboard Mode ONLY)...................................................................................................................................................................... 7 (F2)

Sufx - Erase/None - Default.......................................................................................................................................................................................... 7 (F3)

Erase All Prex & Sufx Data - Default........................................................................................................................................................................... 7 (F4)

Feedback Settings

Beep Volume 0%............................................................................................................................................................................................................ 8 (A1)

Beep Volume 33%.......................................................................................................................................................................................................... 8 (A2)

Beep Volume 67%.......................................................................................................................................................................................................... 8 (A3)

Beep Volume 100% - Default ......................................................................................................................................................................................... 8 (A4)

Beep On Vibrate On - Default......................................................................................................................................................................................... 8 (B1)

Beep Off Vibrate On ....................................................................................................................................................................................................... 8 (B2)

Beep On Vibrate Off ....................................................................................................................................................................................................... 8 (B3)

Beep Off Vibrate Off ....................................................................................................................................................................................................... 8 (B4)

Bluetooth Settings

Bluetooth Radio Out of Range Beep - On ..................................................................................................................................................................... 8 (C1)

Bluetooth Radio Out of Range Vibrate - On ................................................................................................................................................................... 8 (C2)

Bluetooth Radio Out of Range Beep and Vibrate - On.................................................................................................................................................. 8 (C3)

Bluetooth Radio Out of Range Beep and Vibrate - Off - Default ................................................................................................................................... 8 (C4)

Bluetooth Radio Disconnect (Reconnect via QuickConnect Code)................................................................................................................................ 8 (D1)

Remote Management Settings

Remote Management Enable......................................................................................................................................................................................... 8 (D2)

Remote Management Disable - Default ......................................................................................................................................................................... 8 (D3)

Table of Contents

C007995_05_CR2600_CongurationGuide

Cell Phone

Enable Cell Phone Reading Enhancement .................................................................................................................................................................... 8 (E1)

Disable Cell Phone Reading Enhancement - Default..................................................................................................................................................... 8 (E2)

Symbologies

Aztec On - Default ...........................................................................................................................................................................................................8 (F1)

Aztec Off..........................................................................................................................................................................................................................8 (F2)

Aztec Inverse On.............................................................................................................................................................................................................8 (F3)

Aztec Inverse & Normal...................................................................................................................................................................................................8 (F4)

Codabar On - Default ......................................................................................................................................................................................................9 (A1)

Codabar Off.....................................................................................................................................................................................................................9 (A2)

Code 32 On .....................................................................................................................................................................................................................9 (A3)

Code 32 Off - Default.......................................................................................................................................................................................................9 (A4)

Code 39 On - Default.......................................................................................................................................................................................................9 (B1)

Code 39 Off .....................................................................................................................................................................................................................9 (B2)

Code 39 Enable Checksum.............................................................................................................................................................................................9 (B3)

Code 39 Disable Checksum - Default ............................................................................................................................................................................ 9 (B4)

Code 39 Enable Checksum and Strip ............................................................................................................................................................................ 9 (C1)

Code 39 Extended Full ASCII On.................................................................................................................................................................................. 9 (C2)

Code 39 Extended Full ASCII Off - Default ................................................................................................................................................................... 9 (C3)

Code 93 On - Default...................................................................................................................................................................................................... 9 (C4)

Code 93 Off .................................................................................................................................................................................................................... 9 (D1)

Code 128 On - Default ................................................................................................................................................................................................... 9 (D2)

Code 128 Off .................................................................................................................................................................................................................. 9 (D3)

Data Matrix (defaulted on and can not be disabled)

Data Matrix Rectangle (defaulted on and can not be disabled)

Data Matrix Inverse On....................................................................................................................................................................................................9 (E1)

Data Matrix Inverse Off - Default.....................................................................................................................................................................................9 (E2)

GS1 Limited DataBar On.................................................................................................................................................................................................9 (E3)

GS1 DataBar 14/ Truncated 14 On .................................................................................................................................................................................9 (E4)

GS1 DataBar Stacked On ...............................................................................................................................................................................................9 (F1)

GS1 DataBar Expanded On ............................................................................................................................................................................................9 (F2)

All GS1 DataBar On - Default..........................................................................................................................................................................................9 (F3)

All GS1 DataBar Off ........................................................................................................................................................................................................9 (F4)

Int 2 of 5 On - Default ................................................................................................................................................................................................... 10 (A1)

Int 2 of 5 Off.................................................................................................................................................................................................................. 10 (A2)

Int 2 of 5 with Control Character Stripped .....................................................................................................................................................................10 (A3)

Int 2 of 5 Enable Checksum ..........................................................................................................................................................................................10 (A4)

Int 2 of 5 Disable Checksum..........................................................................................................................................................................................10 (B1)

MSI Plessey On - Default ..............................................................................................................................................................................................10 (B2)

MSI Plessey Off.............................................................................................................................................................................................................10 (B3)

PDF417 On - Default.................................................................................................................................................................................................... 10 (C1)

PDF417 Off................................................................................................................................................................................................................... 10 (C2)

Plessey On ................................................................................................................................................................................................................... 10 (C3)

Plessey Off - Default..................................................................................................................................................................................................... 10 (C4)

QR Code On - Default .................................................................................................................................................................................................. 10 (D1)

QR Code Off................................................................................................................................................................................................................. 10 (D2)

QR Code Inverse and Standard On ............................................................................................................................................................................. 10 (D3)

QR Code Inverse On.................................................................................................................................................................................................... 10 (D4)

Straight 2 of 5 On ..........................................................................................................................................................................................................10 (E1)

Straight 2 of 5 Off - Default............................................................................................................................................................................................10 (E2)

UPC On - Default...........................................................................................................................................................................................................10 (E3)

UPC Off .........................................................................................................................................................................................................................10 (E4)

UPC Expansion Enable.................................................................................................................................................................................................10 (F1)

UPC Expansion Disable - Default..................................................................................................................................................................................10 (F2)

UPC Supplemental On ..................................................................................................................................................................................................10 (F3)

UPC Supplemental Off - Default....................................................................................................................................................................................10 (F4)

Table of Contents

C007995_05_CR2600_CongurationGuide

CR2600 Conguration Guide

USB Keyboard Communication

Mode - Default

Keyboard Control Characters

for Non Printable ASCII

USB HID POS

(Terminal 1D 131)

USB Keyboard Mode No

Leading 0 - Default

Japanese Keyboard

US English Keyboard Mapping

- Leading 0

Modem ID

and Firmware Version

Enable Reader Paging - Default

CR2600 Charging Station w/

Embedded Modem Only

Universal Keyboard Mapping

Disable Reader Paging

CR2600 Charging Station w/

Embedded Modem Only

French Keyboard German Keyboard

NOTE: The conguration change will take effect immediately and saved to memory.

Enable Preemptive Mode Disable Preemptive Mode

- Default

Start of Modem

Conguration Codes

RS232 Communication Mode

CodeXML® M3 Modem Only

RS232 9600 Baud Rate

CodeXML® M3 Modem Only

RS232 19200 Baud Rate

CodeXML® M3 Modem Only

RS232 38400 Baud Rate

CodeXML® M3 Modem Only

RS232 57600 Baud Rate

CodeXML® M3 Modem Only

RS232 115200 Baud Rate

- Default

CodeXML® M3 Modem Only

Out of range sengs are

available for the CR2600 when

paired with a CodeXML® M3

Modem. These codes can be

found on page 8.

Start of Reader

Conguration Codes

Reader ID

and Firmware Version

C007995_05_CR2600_CongurationGuide

CR2600 Conguration Guide

NOTE: The conguration change will take effect immediately and saved to memory.

USB Downloader Mode

Reset Reader to

RF Factory Defaults

USB Keyboard Mode

(Batch Mode Only)

USB Virtual COM -

1 way Mode (Batch Mode Only)

Read High Density Field OnlyRead Wide Field Only

Read Both Wide and

High Density Field - Default

Enable Alternative OS

(Windows CE/MAC/Linux)

- Batch Mode ONLY

Disable Alternative OS

- Batch Mode Only - Default

Reader Text

Commands On

Reader Text

Commands Off - Default

Batch Mode Enable

- Send and Log

Batch Mode Disable - Default Batch Mode Enable

- Log Only

USB Speed - High Speed

(Reader in Batch Mode ONLY)

- Default

USB Speed - Full Speed

(Reader in Batch Mode ONLY)

Continuous Scan

Off - Default

Continuous Scan On

Clear All JavaScript RulesClear All Stored Data

and Images and Reboot

Save All Reader Settings

Intentionally Left Blank

Targeting On - Default Targeting Off

C007995_05_CR2600_CongurationGuide

NOTE: The conguration change will take effect immediately and saved to memory.

CR2600 Conguration Guide

Prex - Comma Prex - Space

Prex - Tab

(USB Keyboard Mode ONLY)

Prex - Erase/None - Default Sufx - Comma Sufx - Space

Sufx - Enter

(USB Keyboard Mode ONLY)

Sufx - Tab

(USB Keyboard Mode ONLY)

Sufx - Erase/None - Default Erase All Prex & Sufx Data -

Default

Prex - AIM IDs On Prex - AIM IDs Off - Default

1 sec Duplicate Scan DelayDuplicate Scan

Disabled - Default

2 sec Duplicate Scan Delay 3 sec Duplicate Scan Delay

5 sec Duplicate Scan Delay 10 sec Duplicate Scan Delay 30 sec Duplicate Scan Delay 1 hour Duplicate Scan Delay

1 day Duplicate Scan Delay Intentionally Left Blank Intentionally Left Blank Intentionally Left Blank

C007995_05_CR2600_CongurationGuide

NOTE: The conguration change will take effect immediately and saved to memory.

CR2600 Conguration Guide

Beep Volume 0%

Beep On Vibrate Off Beep Off Vibrate Off

Beep On Vibrate On - Default Beep Off Vibrate On

Beep Volume 33% Beep Volume 67% Beep Volume 100% - Default

Bluetooth Radio Out of Range

Beep and Vibrate - On

Bluetooth Radio Out of Range

Beep and Vibrate Off - Default

Bluetooth Radio Disconnect

(Reconnect via QuickConnect

Code)

Bluetooth Radio Out of

Range Beep - On

Bluetooth Radio Out of Range

Vibrate - On

Remote Management

Disable - Default

Remote Management Enable

Enable Cell Phone

Reading Enhancement

Disable Cell Phone Reading

Enhancement - Default

Aztec On - Default Aztec Off Aztec Inverse On Aztec Inverse & Normal

Intentionally Left Blank

Intentionally Left BlankIntentionally Left Blank

C007995_05_CR2600_CongurationGuide

CR2600 Conguration Guide

NOTE: The conguration change will take effect immediately and saved to memory.

Code 39 Enable Checksum Code 39 Disable

Checksum - Default

Code 39 Enable

Checksum and Strip

Code 39 Extended

Full ASCII On

Code 39 Extended

Full ASCII Off - Default

Code 93 On - Default

Code 93 Off Code 128 On - Default Code 128 Off

Data Matrix

Inverse Off - Default

GS1 Limited DataBar On GS1 DataBar 14/Truncated

14 On

GS1 DataBar Stacked On

Data Matrix Inverse On

GS1 DataBar Expanded On

Code 39 OffCode 39 On - Default

Codabar Off

Codabar On - Default

Intentionally Left Blank

Code 32 On Code 32 Off - Default

All GS1 DataBar On - Default All GS1 DataBar Off

C007995_05_CR2600_CongurationGuide

CR2600 Conguration Guide

NOTE: The conguration change will take effect immediately and saved to memory.

Int 2 of 5 OffInt 2 of 5 On - Default Int 2 of 5 with Control

Character Stripped

PDF417 On - Default PDF417 Off

QR Code On - Default QR Code Off

UPC Supplemental

Off - Default

UPC Supplemental On

UPC On - Default UPC Off

QR Code Inverse OnQR Code Inverse and

Standard On

UPC Expansion Enable UPC Expansion

Disable - Default

Int 2 of 5 Disable Checksum

Int 2 of 5 Enable Checksum

(no character stripping)

MSI Plessey On - Default MSI Plessey Off

Plessey On Plessey Off - Default

Straight 2 of 5 On Straigh 2 of 5 Off - Default

Intentionally Left Blank

Other manuals for 2600

This manual suits for next models

Code 2600 User manual

Popular Barcode Reader manuals by other brands