Codex HD830i User manual

HD830i BARCODE PRINTER
USER MANUAL
: HD830i
: Rev.A
: 2017.03
: 920-016611-00
User Manual
Version
Issue Date
P/N

1 Barcode Printer 1
1-1 Package Contains........................................................................................................................................ 1
1-2 Barcode Printer Introduction....................................................................................................................... 2
2 Barcode PrinterInstallation.................................................................................................................................. 4
2-1 Media Installation.......................................................................................................................................... 4
2-2Printing Mechanism Opening...................................................................................................................... 5
2-3Ribbon Installation.......................................................................................................................................... 6
(4 inch Ribbon ).................................................................................................................................................... 6
(8 inch Ribbon ).................................................................................................................................................... 7
2-4 Label Installation ........................................................................................................................................... 9
2-5 Connection with PC.................................................................................................................................... 12
2-4 Driver and Golabel Installation.................................................................................................................13
2-10 Wizard CD Other Choice Installation..................................................................................................16
3 Barcode Printer Operation................................................................................................................................ 19
3-1 Barcode Printer Operation Interface....................................................................................................... 19
3-3 LAN Setting Operation Instruction............................................................................................................ 25
Main Manu .......................................................................................................................................................... 25
3-5 Error Message ..............................................................................................................................................32
4 Installing the NetSetting software ................................................................................................................37
4-2 The Interface of NetSetting.....................................................................................................................39
5 Barcode Printer Options ....................................................................................................................................46
5-1 Pre -step for Options Installation ..............................................................................................................46
5-2 Cutter Installation........................................................................................................................................ 47
6 Maintenance and Adjustment.........................................................................................................................51
6-1 Print Head Replacement............................................................................................................................ 52
6-2 Print Line Adjustment ..................................................................................................................................53
6-4 Print Head Cleaning.................................................................................................................................... 55
6-5 Print Head Pressure Adjustment ...............................................................................................................55
6-6 Ribbon Wrinkle Adjustment....................................................................................................................... 57
6-7 Cutter Error Trouble Shooting .................................................................................................................... 57
6-8 Trouble Shooting.......................................................................................................................................... 59
Appendix - Printer Specification.....................................................................................................................60
Appendix - Communication Port Specification...........................................................................................61
Appendix – Wi-Fi Setting…………………………………………………………………………………………….59
Appendix – Bluetooth Setting…..………………………………………………………………………………….66
Appendix – FILE MANIPULATION WHEN USING USB STICK…………………………………………………….78

FCC COMPLIANCE STATEMENT
FOR AMERICAN USERS
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
TO WHICH THIS DECLARATION RELATES
IS IN CONFORMITY WITH THE FOLLOWING STANDARDS
FCC CFR Title 47 Part 15 Subpart B:2015 Class B,CISPR 22:2008 ANSI C63.4: 2014 ICES-003 Issue 6:2016, Class B
IEC 60950-1:2005(Second Edition)+Am1:2009+Am2:2013
EN55024:2010+A1:2015
EN55032:2012+AC:2013,Class B
EN61000-3-2:2014
EN61000-3-3:2013
AS/NZS CISPR 22:2009+A1:2010

SAFETY INSTRUCTIONS Please read the following instructions carefully.
Keep the equipment away from humidity.
Before you connect the equipment to the power outlet, please check the
voltage of the power source.
Make sure the printer is off before plugging the power connector into
the power jack.
It is recommended that you connect the printer to a surge protector to
prevent possible transient overvoltage damage.
Be careful not to get liquid on the equipment to avoid electrical shock.
For safety and warranty reasons, ONLY qualified service personnel
should open the equipment.
Do not repair or adjust energized equipment under any circumstances.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the equivalent
type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Only use with designated power supply adapter model.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Specifications are subject to change without Note

1
1 Barcode Printer
1-1 Package Contains
Please check that all of the following items are included with your printer.
(Package content and Logo style may vary per region。)
Barcode Printer
HD830i
Media Sample USB cable Quick Start Guide
Ribbon Power Cord CD
(EU)
1.5 inch/3 inch Adaptor
Ribbon Shaft
Label Roll Holder Media Holder Base Media Shaft
Power Cord
(US)
 Label Roll Stopper

2
1-2 Barcode Printer Introduction
Front View
Rear View
(Interface might differed per Optional interface)
Paper Path
Calibration Key
USB 2.0
Power Plug
Power Switch
Top Cover
Front Panel
Touch Screen
Power Key
Feed Key
RS-232
BT/WiFi (Optional)
USB HOST
Parallel (Optional)
Ethernet
Media Damper

3
Open Top Cover
Ribbon Rewind
TPH Pressure Adjust knob
Movable Media Sensor
TPH Module
TPH Module
Hook Print Frame Hook (Right)
Print Line Adjust Knob (Right)
Ribbon Tension Adjust Knob (Right)
Print Frame Hook (Left)
Print Line Adjust Knob. (Left)
Ribbon Tension Adjust Knob. (Left)
Movable See Through Sensor
Ribbon Supply
Platen
Roller
Label Width Adjust Holder
(Left)
Paper
Damper
Label Width Adjust Holder
(Right)

4
2 Barcode PrinterInstallation
2-1 Media Installation
Lift up the top cover

5
2-2 Printing Mechanism Opening
Push the Print frame hook on the side to head up the print frame.
Lift up the
print frame
Print Frame Hook
(Right)
Print Frame
Hook (Left)
Push
Push