Zebex Z-3191BT Instruction Manual

Follow the steps to enable the scanner SPP Slave mode.
SPP Slave Mode
In this mode, the scanner connects to the host /PC via wireless connection and
performs like there’s a serial connection. In SPP Slave mode, the scanner is
discoverable from a remote device and it can request the scanner for connection.
To enable SPP slave mode:
1. Power on the scanner and scan the "Start of Conguration" label.
Start of Conguration
2. Scan the “SPP Slave mode” label.
Scanner SPP Slave enable
3. Scan the "End of Conguration" label.
End Of Conguration
Wireless Handheld Gun Type Scanner
Quick Connection Guide
Version 1.00
ASCII Code 39 Table
Getting Started
Setting up the scanner

Please follow the below instructions carefully to pair the scanner with
your BlackBerry phone.
Step. 1
Press and hold the trigger to power on the scanner and use the barcodes
in Setting up the scanner to enable Scanner SPP Slave mode. Steady
blue LED ashing indicates the scanner is wireless ready.
Step. 2
On your BlackBerry phone, select the icon to open Manage
Connections menu. Tick "Bluetooth" to enable Bluetooth.
Step. 3
Select "Set Up Bluetooth" in the menu.
Connect scanner with BlackBerry phone
Connecting the phone
Step. 4
Select "Search" to discover surrounding Bluetooth devices.
Step. 5
The scanner will appear as "ZBBT". Select "ZBBT" to connect the
scanner.
Your phone should now be connected.
Step. 7
Open a serial app (such as Serial Magic) on the phone to begin
scanning.
Press and hold trigger
Blue flashing 0.5 second interval