Coemar Concept Design 384 User manual

Concept
Design 384

2
Please note in the space provided above the relative service information of the model and the retailer from whom
you purchased your Concept Design 384: this information will assist us in providing spare parts, repairs or in an-
swering any technical enquiries with the utmost speed and accuracy.
WARNING: the security of the fixture is granted only if these instructions are strictly followed; therefore it is
absolutely necessary to keep this manual.
Serial Number:
...................................................................................................................................................................................................
Purchase date:
...................................................................................................................................................................................................
Dealer:
...................................................................................................................................................................................................
Address:
...................................................................................................................................................................................................
Suburb:
...................................................................................................................................................................................................
Country:
...................................................................................................................................................................................................
Phone / Fax:
...................................................................................................................................................................................................
User Manual version 2.0
Edition March 2022
Concept
Design 384

3
Index
1. Packaging and transportation ................................................................................................................................Pag. 4
1.1 Packaging ............................................................................................................................................................Pag. 4
1.2 Transportation ...................................................................................................................................................Pag. 4
2. General information ...............................................................................................................................................Pag. 4
2.1 Safety informations ...........................................................................................................................................Pag. 4
2.2 Warranty conditions .........................................................................................................................................Pag. 5
2.3 EC norms ..........................................................................................................................................................Pag. 5
3. Product specifications ............................................................................................................................................Pag. 6
3.1 Technical characteristics ...................................................................................................................................Pag. 6
3.2 Dimensions........................................................................................................................................................Pag. 6
3.3 Back panel description .....................................................................................................................................Pag. 7
4. Installation ...............................................................................................................................................................Pag. 8
4.1 Mechanical installation .....................................................................................................................................Pag. 8
5. Powering up ..............................................................................................................................................................Pag. 8
5.1 Operating voltage and frequency ....................................................................................................................Pag. 8
5.2 Connection to mains power ............................................................................................................................Pag. 8
6. Connections .............................................................................................................................................................Pag. 9
6.1 LEDs connection ..............................................................................................................................................Pag. 9
6.3 DMX connection ............................................................................................................................................Pag. 10
7. Turning the fixture on and DMX function .........................................................................................................Pag. 11
7.1 Turning the unit on ............................................................................................................................................Pag. 11
7.2 DMX address setting .......................................................................................................................................Pag. 11
7.3 DMX chart 64 channels .................................................................................................................................Pag. 12
7.4 DMX chart 48 channels .................................................................................................................................Pag. 14
7.5 DMX chart 32 channels .................................................................................................................................Pag. 16
7.6 DMX chart 6 channels ....................................................................................................................................Pag. 17
7.7 DMX chart 4 channels ....................................................................................................................................Pag. 17
8. Display and function .............................................................................................................................................Pag. 18
8.1 Quick guide to menu .......................................................................................................................................Pag. 18
8.2 Rapid count .....................................................................................................................................................Pag. 18
8.3 Main function menu (FUNC) .......................................................................................................................Pag. 19
8.4 Measures menu (MEAS) ...............................................................................................................................Pag. 21
8.5 Special functions of the fixture .....................................................................................................................Pag. 22
8.6 Error messages ...............................................................................................................................................Pag. 22
9. Accessories and spare parts .................................................................................................................................Pag. 23
10. Maintenance ........................................................................................................................................................Pag. 23
10.1 Firmware update ...........................................................................................................................................Pag. 23
10.2 Periodic cleaning ..........................................................................................................................................Pag. 23
10.3 Periodic controls ..........................................................................................................................................Pag. 23
10.4 Fuses .............................................................................................................................................................Pag. 23
11. F.A.Q. and answers ..............................................................................................................................................Pag. 24

4
Congratulations on having purchased a Coemar product. You have assured yourself of a fixture of the highest
quality, both in componentry and in the technology used. We renew our invitation to you to complete the service
information on the previous page, to expedite any request for service information or spares (in case of problems
encountered either during, or subsequent to, installation). This information will assist in providing prompt and ac-
curate advice from your Coemar service centre. Following the instructions and procedures outlined in this manual
will ensure the maximum eciency of this product for years to come.
1. Packaging and transportation
1.1 Packaging
Open the packaging and make sure that no part of the equipment has suered any damage during the transpor-
tation. In case of damage to the fixture, contact your currier and your supplier immediately by telephone, fax or
e-mail, and inform them you will formally notify them in writing through registered letter.
Packing list
Ensure the packaging contains:
1 Concept Design 384
1 Instruction manual
1 Main power plugs
2. General information
2.1 Safety informations
Fire prevention:
1. Never locate the fixture on any flammable surface.
2. Minimum distance from flammable materials: 0,5 m.
3. Minimum distance from the closet illuminable surface: 0,5 m.
4. Replace any blown or damaged fuse only with those of identical values. Refer to the sche-
matic diagram if there is any doubt.
5. Connect the projector to mains power protected by a thermal magnetic circuit breaker.
Prevention from electric shock:
1. Presence of high voltage inside of the fixture. Insulate the projector from mains supply
before opening or performing any function which involves touching the inside of the fix-
ture, including lamp replacement.
2. For the connection to the mains, adhere strictly to the guidelines outlined in this manual.
1.2 Transportation
The Concept Design 384 should be transported in either its original packaging.

5
Safety:
1. The fixture must always be installed with bolts, clamps, or other fixing devices which are
suitably rated to support the weight of the fixture.
2. Always use a secondary safety fixing device with chain or steel wire of a suitable rating to
sustain the weight of the unit in case of failure of the principal fixing point.
3. The external surfaces of the unit, at various points, may reach 60°C. Never handle the
unit until at least 10 minutes have elapsed since the fixture was turned o.
4. Never install the fixture in an enclosed area lacking sucient air flow; the room tempera-
ture must not exceed 35°C.
5. The projector contains electronic and electrical components which must under no cir-
cumstances be in contact with water, oil or any other liquid. Failure to do so will compro-
mise the proper functioning of the fixture.
2.2 Warranty conditions
1. The fixture is under warranty for 36 months from the purchase date against factory defections.
2. Damage ought to unskillfulness, inappropriate use, or lack of suggested maintenance are excluded from the
warranty.
3. Warranty expires when the fixture is opened by unauthorized personnel.
4. Warranty doesn’t include the replacement of the fixture.
5. Serial number and model of the fixture are necessary to retrieve informations and assistance from the
dealer.
2.3 EC Norms
The fixture meets all fundamental applicable EC requirements.
3. The level of technology of Concept Design 384 requires the use of specialised personnel
for all service applications; refer all work to your authorised Coemar service centre.
4. A good earth connection is essential for the proper functioning of the fixture. Never con-
nect the fixture if there is no earth connection.
5. Mains cables must not come into contact with other cables.
6. Do not operate the fixture with wet hands or in an area where water is present.
7. The fixture must never be located in an exposed position, or in areas of extreme humidity.

6
Power supply 90-260 V, auto-sensing, 50/60 Hz
Maximum current 3 A @ 230 V, 5 A @ 115 V
Power factor Cosφ= 0.9
Max power consumption 500 W - 350 mA
Maximum internal temperature 80 °C / 176 °F
Maximum external temperature 35 °C / 95 °F
Weight (without optic) 3.5 kg - 7.7 lbs
3. Product specifications
3.1 Technical characteristics
3.2 Dimensions

7
3.3 Back/front panel description
Plus button Minus button
Display
Menu button Enter button
DMX In/Out
IR InRJ45 Out
Power button
Main In

8
4. Installation
4.1 Mechanical installation
Concept Design 384 can be placed on a shelf or inserted in a standard rack by the two mounting brackets
enclosed.
5. Powering up
5.1 Operating voltage and frequency
The fixture may operate at voltages from 90 to 260 V at a frequency of 50 or 60 Hz. It is not necessary to
eect any setup procedures, Concept Design 384 will automatically adjust its operation to suit any frequency
or voltage within this range.
5.2 Connection to mains power
Mains cable characteristics
The mains cable provided is thermally resistant, complying to the most recent International standards.
Connection to mains power
Concept Design 384 is equipped with a power connector IEC.
The max absorption of Concept Design 384 is reported in the following table:
- 230 V: 3 A constant during normal exercise.
- 115 V: 5 A constant during normal exercise.
Warning!
The use of a thermal/magnetic circuit breaker is recommended. Strict adherence to
regulatory norms is strongly recommended.
Concept Design 384 should not be powered through a Dimmer as this may damage the
internal switching power supply
Prior to connecting the device to mains power, ensure that the mains characteristics are
within the recommended range for use with Concept Design 384.
A good earth connection is essential for the correct operation of Concept Design 384.
All cabling and connection should be carried out by suitably qualified personnel.
484 mm
19.05 in
462 mm
118.19 in

9
6. Connections
6.1 LEDs connection
Concept Design 384 can at the same time supply up to 8 outputs, each output can control up to 4 channels at
350 mA constant current and a maximum of 47 Volts.
Up to 350mA and up to 47 V for each channel
LEDs connection must be done
following this schematic
Pin 8 = CH1+
Pin 7 = CH1-
Pin 6 = CH2+
Pin 5 = CH3-
Pin 4 = CH3+
Pin 3 = CH2-
Pin 2 = CH4+
Pin 1 = CH4-

10
6.3 DMX connection
Concept Design 384 can work in DMX mode and it can be controlled by a DMX controller:
Signal connection via XLR5 connectors:
Connection is to international standards. Connection is as indicated below.
Pin 1 = GND
Pin 2 = data -
Pin 3 = data +
Pin 4 = n.c.
Pin 5 = n.c.
Warning!
Ensure that all data conductors are insulated from one another, the screening and the metal housing of
the connector.
Pin # 1 and the housing should never be connected to mains earth connection.
001
289
57 7
Ch.
Master
Slave
Slave
Slave
Master
Slave
Slave
Slave
DMX mode Master/Slave - IR control model
NO DMX NO DMX 
DMX controller
Other units
Master/Slave mode
IR sensor
Other units
Other units